Abstract:Manganese-substituted cobalt nano-ferrites, Co(1−x)Mn(x)Fe2O4 (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were synthesized using chemical co-precipitation method. Physical properties of Co(1−x)Mn(x)Fe2O4 nano-ferrites were then characterized using thermal gravimetric—differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectrometer, transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). TGA/DTA study indicates that the thermal stability of the prepared manganese doped cobalt ferrite nanoparticles. X-ray diffraction patterns of all the prepared ferrite samples show good in quality, pure nanosized, single-phased cubical spinel structures, with ferromagnetic behavior. We demonstrated that the expansion of lattice constant (a) and crystallite size (D) induced by manganese substituted of cobalt ferrites exerted remarkable effects on its structural and magnetic properties. The lattice constant (a) and crystallite size (D) increase with increasing manganese substituted cobalt ferrites. Williamson–Hall (W–H) method was used to evaluate the crystallite size and lattice strain of the Co(1−x) Mn(x)Fe2O4 nanoparticles samples by peak broadening. The calculated crystal size of Co(1−x) Mn(x)Fe2O4 nanoparticles on the W–H plots were highly intercorrelated with the HR-TEM and results of Scherrer Deby equation. The other physical parameters, such as X-ray density, hopping length, ionic radius, bond length, tetrahedral edge, octahedral edge, and unshared octahedral edge values were estimated from the highest intensity peak (311) of X-ray diffraction. The Fourier transform infrared (FT-IR) spectrometer of the Co–Mn ferrite nanoparticles systems were recorded in the frequency range of 200–1000 cm−1. FT-IR spectra show the two fundamental absorption bands of interstitial sub-lattice sites (M–O). The high absorption band (ν1) and the low absorption band (ν2) corresponds to the tetrahedral [A] and octahedral (B) sites, respectively, confirming the formation of single cubic spinel ferrite lattice system. The TEM results show that the ferrite nanoparticles have a nearly spherical shape with some agglomerations. From the analysis of VSM, the values of saturation magnetization (Ms) increases from 31.46 to 37.16 emu/g, then decreases with increasing Mn2+ ions substitution in the Co-ferrite system. The coercivity of the Mn2+ ions substituted cobalt ferrites increases up to x = 0.6 followed by a decrease. The optimized magnetic parameters suggest that the material with composition Co0.6Mn0.4Fe2O4 may be suitable for longitudinal magnetic recording media and other various technological applications.

Structural, magnetic and dielectric properties of cerium-doped manganese – cobalt ferrite nanoparticles

Thermal, microstructural and magnetic properties of manganese substitution cobalt ferrite prepared via co-precipitation method

Impact of co-doping with Mn and Co/Mn on the structural, microstructural, dielectric, impedance, and magnetic characteristics of multiferroic bismuth ferrite nanoparticles

Experimental and First-Principles DFT Studies of Electronic, Optical and Magnetic Properties of Cerium–manganese Codoped Zinc Oxide Nanostructures

Structural and Temperature Dependent-Magnetic and Dielectric Properties of CoNdxFe2-xO4 (0≤ x ≤0.1) Nanoparticles

Structural and magnetic properties of Ni doped CeO2 nanoparticles

Structural, Optical, Magnetic and Dielectric Properties of Ce-Doped MgFe2O4 Prepared by Microwave Hydrothermal Method

Enhanced dielectric and magnetic properties in Mn-doped bismuth ferrite multiferroic nanoceramics

Influence of Ce3+ and La3+ Substitution on Structural & Optical Parameters and Electrical Behavior on Mg-Zn Ferrites Synthesized via Co-precipitation method

Incorporation of Mn2+ into cobalt ferrite via sol–gel method: insights on induced changes in the structural, thermal, dielectric, and magnetic properties

Ce–Dy substituted barium hexaferrite nanoparticles with large coercivity for permanent magnet and microwave absorber application

Transport Properties of Ce-Doped Cd Ferrites CdFe2−xCexO4

Effect of cerium substitution on structural, optical, electrical transport and magnetic properties of spinel cobaltite synthesized through citrate-nitrate method

Study of lanthanum ions (La3+) doped Manganese-Cobalt (Mn-Co) based spinel ferrite nanoparticles for technological applications

Sol-Gel auto-combustion, structural, photo-catalytic activity and UV-VIS study of Co1-xZnxFe2-yCeyO4 NPs (x = 0.3, y = 0.04)

Impact of rare earth Ce3+ on the structural, and magneto-dielectric response of chemically derived Mg0.5Zn0.25Co0.25CeyFe2-yO4 spinel ferrites

Influence of Fe and Cu Co-Doping on Structural, Magnetic and Electrochemical Properties of CeO2 Nanoparticles

Impact of transition metal (Co and Mn) substitution on the structural and magnetic properties of BaFe12O19 nanoparticles towards permanent magnet application

Synthesis, Structural and Optical Properties of Mn-Doped Ceria Nanoparticles: A Promising Catalytic Material

Photoelectric and optoelectronic effects of hard ferromagnetic manganese cobalt (Mn–Co) ferrite nanoparticles for high-frequency device application

Synthesis and Characterization of Ce3+-Doped Ni0.5Cd0.5Fe2O4 Nanoparticles by Sol–Gel Auto-Combustion Method