Abstract:Background Aniline serves as a pivotal precursor in many industries such as pesticides, pharmaceuticals, and chemicals. However, its ingestion can lead to severe health consequences, including the potential to induce cancer, respiratory tract irritation, and adverse effects on the nervous and digestive systems in the human body. The widespread use of aniline in industrial processes, coupled with inadequate wastewater management that allows for the direct release of aniline into the environment, leads to surface and groundwater contamination. Therefore, it becomes crucial to devise a reliable electrochemical sensor capable of detecting even trace amounts of aniline. Results This study presents a modified polyol synthesis method for producing silver nanorods (AgNRs, length: 861-1345 nm, diameter: 66-107 nm) with preferential growth along the (111) crystal plane. Immobilizing AgNRs on a glassy carbon (GC) electrode with Nafion as a binder decreases its charge transfer resistance from 3040 to 129 kΩ and increases its electroactive area from 0.034 to 0.101 cm 2 . AgNRs/GC electrode exhibited an aniline detection limit of 0.032 μM and sensitivity of 1.4841 μA.M -1 cm -2 within a linear range of 0-10 μM using square wave voltammetry (SWV). The reaction rate constant of aniline sensing was determined to be 0.08697 s -1 . Chlorobenzene, acephate, and chlorpyrifos could not interfere aniline detection, and 26% decrease in peak response was observed after the 10 th cycle of aniline sensing. The sensor demonstrated ∼100% recovery for aniline, comparable to the performance of high-performance liquid chromatography when applied to real-world samples like tap and river water. Significance The electrochemical sensing of aniline is notably efficient in tap and river water within the acceptable limit, by utilizing one dimensional AgNRs functionalized GC electrode. Importantly, the presence of interferents does not compromise the sensitivity of the sensor. Therefore, one dimensional AgNRs synthesized via a modified polyol route emerge as a promising electrocatalyst for the in-situ detection and determination of aniline.

Comparative optical sensing studies of silver nanowires prepared by different synthetic routes

Polymer Single-Nanowire Optical Sensors

Biosynthesis of ZnO nanoparticles and effect of silver doping in gas sensing characteristics of volatile organic compounds

Preparation of In_2O_3 Nanwires by Sol-gel Template Technology and Their Gas Sensing Property

Facile synthesis of Ag nanoparticles-decorated WO3 nanorods and their application in O2 sensing

Optimizing Gas Sensing Performance of CuO Nanoparticles via Sol-Gel Synthesis Approach for Efficient Detection of Ammonia Gas

NH3 gas-sensing application of Ag-doped ZnO–CuO nanocomposite synthesized via chemical route

Multi-Walled Carbon Nanotubes Decorated with Silver Nanoparticles for Acetone Gas Sensing at Room Temperature

Room temperature selective sensing of aligned Ni nanowires using impedance spectroscopy

Development of Ammonia Gas Sensor Using Optimized Organometallic Reagent

Highly Sensitive Ammonia Sensors Based on Ag-Decorated WO 3 Nanorods

Silver Loading Tin Oxide Nanostructure for Gas Sensing Application

Improved Selectivity of Electrochemical Aniline Sensing using One-Dimensional Silver Nanorods with High Aspect Ratio Synthesized by Ascorbic Acid Assisted Method

Nanostructured NiO-polyaniline fibers composite smart material as a room temperature ammonia sensor

Templating Synthesis of Sno2 Nanotubes Loaded with Ag2o Nanoparticles and Their Enhanced Gas Sensing Properties

PANI@Ag nanocomposites gas sensors for rapid detection of ammonia

Machine Learning-Assisted Improving Gas Sensor Array Recognition Ability

Synthesis and Enhanced Gas-Sensing Properties of Ultralong Nio Nanowires Assembled with Nio Nanocrystals

A comparative study between PANI, PANI/PbS and PANI/PbS/ZnO core/shell quantum dots as chemiresistive sensor for the detection of formaldehyde gas

Sensing Properties of g-C3N4/Au Nanocomposite for Organic Vapor Detection

Nanoscale Engineering of Polypyrrole-Silver Oxide Composites for Rapid and Ultrasensitive Room Temperature Carbon Monoxide Detection