Abstract:Chemical recycling of plastic waste via thermochemical processes is essential to move to a carbo-circular economy, reducing our dependence of fossil resources. However, recovering monomers from polyolefins in one or multiple steps is challenging due to their chemical inertness. In the present work, a tandem micro-pyrolyzer coupled to comprehensive two-dimensional gas chromatography and FID/ToF-MS detectors was utilized to study the performance of industrial formulations of steam-treated FCC catalysts and HZSM-5 additives for the in-line catalytic upgrading of polyolefin pyrolysis products towards light olefins and aromatics in two steps. When upgrading pyrolysis vapors from LDPE over the steam-treated catalysts at 600 °C, CH4 yields did not exceed 0.5 wt% due to their low acidity. The FCC catalyst formulations obtained higher yields of C5-C11 aliphatics (up to 42 wt%) and were more active in converting C12 + products than the HZSM-5-containing additives. The highest C2-C4 olefin selectivity of 53 wt% was obtained using a bare steam-treated HZSM-5 additive. With this catalyst, at higher catalyst loading and temperature (700 °C), the light olefin yield reached 69 wt% (19% ethylene, 22% propylene, 10% 1,3-butadiene, and 18% other C4 olefins). Importantly, similar yields of light olefins with even higher propylene yields of 31 wt% were obtained when processing real post-consumer mixed polyolefin waste. An adjusted loading of unsteamed catalyst (to obtain a similar level of initial conversion of C12 + products) showed higher coking propensity and deactivated more rapidly than its steam-treated version. The research results show great potential for the pyrolysis of mixed polyolefin waste followed by the direct in-line upgrading of the pyrolysis vapors to produce high value base chemicals such as C2-C4 olefins, aromatics, and naphtha-range aliphatics at high selectivity while limiting formation of coke, CH4, and H2.

Marble processing effluent treatment sludge in waste poly(ethylene terephthalate) pyrolysis as catalyst–II: recovery from pyrolytic fluids

Marble processing effluent treatment sludge in waste PET pyrolysis as catalyst-I: pyrolysis product yields and the char characteristics

The role of physicochemical marble processing wastewater treatment sludge in the production of new generation pyrolysis char from waste polypropylene

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

THERMAL CATALYTIC PYROLYSIS PROCESS STUDIES FOR POST CONSUMER POLYETHYLENE WASTE CONVERSION

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Valorisation of Sub-Products from Pyrolysis of Carbon Fibre-Reinforced Plastic Waste: Catalytic Recovery of Chemicals from Liquid and Gas Phases

Thermo-catalytic pyrolysis of sewage sludge and techno-economic analysis: The effect of synthetic zeolites and natural sourced catalysts

Thermal and catalytic pyrolysis of a synthetic mixture representative of packaging plastics residue

Alkaline Earth Metal-Based Minerals/wastes-Catalyzed Pyrolysis of Poly(ethylene Terephthalate)/poly(butylene Terephthalate) for Benzenes-Enriched Oil Production

Catalyst-mediated pyrolysis of waste plastics: tuning yield, composition, and nature of pyrolysis oil

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

Using of Adsorbents Produced from Waste Polyethylene Pyrolysis Char in Adsorption of Some Aromatic Hydrocarbon Gases and Recoverability of Waste Adsorbents as Fuel

Thermal and spectroscopic (TG/DSC–FTIR) characterization of mixed plastics for materials and energy recovery under pyrolytic conditions

OPTIMIZATION OF NATURAL CATALYSTS IN OIL PRODUCTION FROM PLASTIC WASTE PYROLYSIS

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

Valorization of the plastic residue from a WEEE treatment plant by pyrolysis

Investigation of thermal degradation kinetics and catalytic pyrolysis of industrial sludge produced from textile and leather industrial wastewater

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Alternative green application areas for olive pomace catalytic pyrolysis biochar obtained via marble sludge catalyst

Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes