Abstract:Abstract Plastics pyrolysis is based on thermal and sometimes catalytic breakdown of the polymer structure. The target product may be monomer (from PMMA, PTFE, PS), oil fractions ranging from petrol (C 5 ‐C 10 ) and kerosene (C 10 ‐C 15 ) to waxy fractions (≥C 20 ), aromatics, synthesis raw materials formed by hydrogenation or synthesis gas (H 2 , CO). The desired product determines the operating conditions required and hence the technology used. A survey is given of laboratory, pilot and industrial scale reactors, pyrolytic extruders, stirred tanks and single‐ or double‐bed fluidized systems. Moreover, the use of plastics in oil refinery‐based processes, such as fluid catalytic cracking, hydrocracking, viscosity breaking and delayed coking, and also (coal‐derived) hydrogenation and gasification are briefly covered. The product distribution in a pyrolysis process has to be derived experimentally, with the operating temperature, heating rate, catalytic effects, residence time of feed material and reaction products, reaction pressure, possible supply of reactive gases (such as oxygen, hydrogen) and, of course, the chemical constitution and structure of the original plastics as major factors. Pyrolysis involves the breaking of chemical bonds and is normally endothermic. The required heat of reaction can be supplied indirectly through the reactor walls, by a circulating heat carrier, which may be the polymer content of the reactor or the sand in a dual fluid‐bed system, or by partial oxidation. The reactor technology is generally determined by the temperature level required, heating method, necessary residence time and possibly the presence of a catalyst, required to rearrange linear structures to high‐octane‐number branched ones, to eliminate heteroatoms (Cl, N, O, S), etc. Some potential operating problems are addressed in an EU‐funded project with acronym Cycleplast, a joint project of five teams from Central and Western Europe, the aims of which are briefly described.

Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes

Thermal Degradation of Real-World Waste Plastics and Simulated Mixed Plastics in a Two-Stage Pyrolysis–Catalysis Reactor for Fuel Production

THERMAL CATALYTIC PYROLYSIS PROCESS STUDIES FOR POST CONSUMER POLYETHYLENE WASTE CONVERSION

Study on the kinetics of catalytic pyrolysis of single and mixed waste plastics by spent FCC catalyst

Kinetic Analysis of Thermal Degradation of Recycled Polypropylene and Polystyrene Mixtures Using Regenerated Catalyst from Fluidized Catalytic Cracking Process (FCC)

Catalytic pyrolysis of polyolefin waste into valuable hydrocarbons over reused catalyst from refinery FCC units

Pyrolysis Oils from Used Tires and Plastic Waste: A Comparison of a Co-Processing with Atmospheric Gas Oil

Catalyst-mediated pyrolysis of waste plastics: tuning yield, composition, and nature of pyrolysis oil

Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling

Study on Catalytic Cracking of Bio-Oil Pyrolyzed from Biomass

Experimental investigation on slow thermal pyrolysis of real-world plastic wastes in a fixed bed reactor to obtain aromatic rich fuel grade liquid oil

OPTIMIZATION OF NATURAL CATALYSTS IN OIL PRODUCTION FROM PLASTIC WASTE PYROLYSIS

Technical methods in plastics pyrolysis

Enhanced Oil Yield by Catalytic Pyrolysis of Thermoplastics Using Cost-Effective Spent FCC and BaCO3 and Its Valorization to Gasoline and Diesel Grade Fuel via Fractionation

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Processing renewable and waste-based feedstocks with fluid catalytic cracking: Impact on catalytic performance and considerations for improved catalyst design

Investigation on thermal dechlorination and catalytic pyrolysis in a continuous process for liquid fuel recovery from mixed plastic wastes

Pilot-Scale Pyrolysis of Scrap Tires in A Continuous Rotary Kiln Reactor

Co-pyrolysis of Hydrothermally Pre-Treated Microalgae Residue and Polymeric Waste (plastic/tires): Comparative and Dynamic Analyses of Pyrolytic Behaviors, Kinetics, Chars, Oils, and In-Situ Gas Emissions

Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln

Catalytic Pyrolysis of Biomass and Polymer Wastes