Abstract:This paper investigates the physical properties of Cu 0.6 Mg 0.2 Co 0.2 FeCrO 4 spinel ferrite produced by the sol-gel method and calcined at 850 °C. Our specimen possesses a cubic structure with space group. We detect the presence of small amount of Fe 2 O 3 . Our sample exhibited lattice parameters where a , b , and c were all equal to 8.3506 Å, and the cell volume was 582.307 Å 3 . Then, the spectrum demonstrated good refinement analysis, with a χ 2 factor of 1.66. Subsequently, the Debye–Scherrer equation provided a grain size of 88.18 nm. However, the grain size determined by the Williamson-Hall method resulted was 96 nm. Morphological analysis indicated that our sample consists of micro-sized grains equal to 2.62 μm. The dielectric analysis was carried out from 300 to 600 K, while measurements were taken over a wide frequency range from 10 2 to 10 6 Hz. Examination of the relaxation time and AC conductivity revealed that the same charge carriers could be responsible for both the relaxation and conduction mechanisms. The increase in conductivity at high-frequency can be attributed to the influence of charge carrier mobility through different localized states. This force also promotes the release of confined charges from different trapping sites. The overlapping-large polaron tunneling (OLPT) and Correlated Barrier Hopping (CBH) models were utilized to clarify the observed conduction mechanism. Furthermore, at lower frequencies, the sample exhibited higher real impedance values. Then, as the frequency rose, the Z ′ values decreased because more charge entities were transported, leading to a reduction in the concentration of trapped electric charge. The changes observed in Z ′′ suggest the emergence of the relaxation process. The Nyquist diagram was adjusted from 0 to 5 × 10 7 to understand the equivalent circuit in our system. Then, the conduction mechanism in the sample is influenced by the contributions of both grain and grain boundaries. At low frequencies, the ε ′ and ε ′′ values showed a significant rise and gradually decreased with increasing frequency, indicating that the sample is suitable for high-frequency applications. The decrease in ε ′ and ε ′′ values was more pronounced at lower frequencies than at higher frequencies. This behavior can be adequately explained using Maxwell and Wagner's expression, which is in line with Koops' theory, providing a coherent justification for the observed trends. The value of M ′ rose with frequency independently of temperature, approaching a plateau at a maximum asymptotic value. This saturation phenomenon indicates that charge carriers move over short distances during the conduction process. The Kohlrausch, Williams, and Watts functions were used to fit imaginary electrical modulus spectra. This revealed the non-Debye nature of the relaxation mechanism in the material.

Spinel ferrites having conductive grains, resistive interfacial boundaries and relaxation mechanism for possible supercapacitor applications

Synthesis, structural and opto-electrical/electronic trends of Zn/Co substituted spinel ferrites for energy conservation and supercapacitor applications

Exploring different non-iron based Co-spinel ferrites as potential electrode materials for supercapacitor applications

Samarium substituted M-type Sr hexaferrites: The structural, magnetic and electrochemical properties for supercapacitor applications

Spinel M0.5Zn0.5Fe2O4 (M = Ni, Co, and Cu) ferrites for energy storage applications: Dielectric, magnetic and electrochemical properties

Zinc Substitution Effect on the Structural, Spectroscopic and Electrical Properties of Nanocrystalline MnFe2O4 Spinel Ferrite

Coexistence of Low Damping and Strong Magnetoelastic Coupling in Epitaxial Spinel Ferrite Thin Films

One-Pot Syntheses Of Spinel Ab(2)O(4) (A=Ni Or Co, B=Mn Or Fe) Microspheres With Different Hollow Interiors For Supercapacitors Application

Experimental study of electrical and dielectric properties of Cu0.6Mg0.2Co0.2FeCrO4 spinel ferrite

Optimized electrospun MnFe2O4 nanofibers as promising electrode materials for supercapacitor applications: physical and electrochemical properties

Chemical synthesis of Mg0.8Zn0.2SmxFe2−xO4 nanoparticles structural characterization, optical studies, electromagnetic properties, and applications

Enhancement of microstructural and magnetic properties of high spin Mn substituted nanocrystalline Ni-Mn-Cu-Zn ferrites

Fabrication of (Ag, Zn, Co) based spinel ferrites as electrode materials for high energy density hybrid supercapacitors

Crystal structure and peculiarities of microwave parameters of Mg1-xZnxFe2O4 nanospinel ferrites

Controllable MnCo2S4 nanostructures for high performance hybrid supercapacitors

Crystal Structure and Peculiarities of Microwave Parameters of Mg 1-X Zn X Fe 2 O 4 Nanospinel Ferrites

Experimental and DFT studies on spinel NiMn2O4 flower derived from bimetallic MOF as an efficient electrode for next-generation supercapacitor

Study of spinel ferrites with addition of small amount of metallic elements

Low-crystalline birnessite-MnO2 nanograins for high-performance supercapacitors

Design and fabrication of novel MnCr2O4 nanostructure: electrochemically deposited on stainless steel strip with enhanced efficiency towards supercapacitor applications

Synthesis and Characterization of Nanocrystalline Zinc Manganese Ferrite