Abstract:A wettable liquid metal GaIn layer has been constructed between NZSP and Na anode to effectively reduce the interfacial resistance and avoid the formation of voids. The Ga4Na and NaIn alloys caused by the spontaneous reaction of GaIn with Na metal enhance the bond of NZSP with Na anode. At 0.05 mA cm−2 and 0.1 mA cm−2, the Na/LM@NZSP/Na symmetric cell can cycle stably for over 6500 and 3000 h and exhibit a critical current density of 0.8 mA cm−2 at 25 °C. Solid‐state sodium metal batteries have attracted wide attention due to their high energy density, remarkable safety, and abundant sodium resources. However, the growth of Na dendrites and poor interfacial contact between Na metal anode and Na3Zr2Si2PO12 (NZSP) solid‐state electrolytes severely limit their practical application. Herein, a wettable liquid metal (GaIn) interlayer significantly reduces the interfacial resistance and avoids the formation of voids at the Na/NZSP interface. Moreover, the Ga4Na and NaIn alloys at the interface caused by the spontaneous reaction of GaIn with Na metal enhance the bond of NZSP with Na anode, which provides a continuous Na+ diffusion pathway and homogeneous Na+ flux to suppress Na dendrite growth. The symmetric cell can cycle stably for over 6500 h at 0.05 mA cm−2 and over 3000 h at 0.1 mA cm−2, with a critical current density of 0.8 mA cm−2 at 25 °C, and the interfacial resistance is significantly reduced to 21.6 Ω from 1095.1 Ω. The full cell coupled with NaNi1/3Fe1/3Mn1/3O2 also shows outstanding cycling performance, maintaining 85.1% capacity after 100 cycles at 0.5 C. This work demonstrates that the liquid metal interlayer has a large potential for the practical application of solid‐state metal batteries.

CuGa 2 transition phase anchored liquid GaSn achieves high-performance liquid metal battery cathode

Core-shell GaSn@rGO nanoparticles as high-performance cathodes for room-temperature liquid metal batteries

Uniform Li Deposition by Regulating the Initial Nucleation Barrierviaa Simple Liquid-Metal Coating for a Dendrite-Free Li–metal Anode

Alkali‐ion Batteries by Carbon Encapsulation of Liquid Metal Anode

Single-Phase Ternary Compounds with a Disordered Lattice and Liquid Metal Phase for High-Performance Li-Ion Battery Anodes

High-performance bismuth-gallium positive electrode for liquid metal battery

Tuning wettability of gallium-based liquid metal anode for lithium-ion battery via a metal mixing strategy

A High‐Performance Room‐Temperature Li||Ga–Sn Liquid Metal Battery for Grid Energy Storage

Optimizing Na plating/stripping by a liquid sodiophilic Ga-Sn-In alloy towards dendrite-poor sodium metal anodes

Sb-Cu alloy cathode with a novel lithiation mechanism of ternary intermetallic formation: enabling high energy density and superior rate capability of liquid metal battery

Liquid metal in prohibiting polysulfides shuttling in metal sulfides anode for sodium-ion batteries

Liquid Metal Interlayer for Ultrastable Solid‐State Sodium Metal Battery

Liquid Metal Alloys as Self-Healing Negative Electrodes for Lithium Ion Batteries

Stabilization of Sn Anode through Structural Reconstruction of a Cu-Sn Intermetallic Coating Layer

Dynamic Liquid Metal Catalysts for Boosted Lithium Polysulfides Redox Reaction

Stabilizing Solid Electrolyte Interphase on Liquid Metal Via Dynamic Hydrogel-Derived Carbon Framework Encapsulation

In situ formation of lithiophilic Li22Sn5 alloy and high Li-ion conductive Li2S/Li2Se via metal chalcogenide SnSSe for dendrite-free Li metal anodes

Anchoring an Artificial Solid–Electrolyte Interphase Layer on a 3D Current Collector for High‐Performance Lithium Anodes

A Dendrite-Free Ga-In-Sn-Zn Solid-Liquid Composite Anode for Rechargeable Zinc Batteries

A self-healing liquid metal anode for lithium-ion batteries

In-situ polymerized carbonate induced by Li-Ga alloy as novel artificial interphase on Li metal anode