Valorization of Glycerol by Ultrasound-Assisted Acetalization to Solketal

Jana, Arun Kumar
DOI: https://doi.org/10.1007/s12649-024-02818-4
2024-12-10
Waste and Biomass Valorization
Abstract:Conversion of glycerol into high-value chemical products is a compelling process in the biomass conversion and biorefinery industry. In this study, a novel approach was employed to investigate ultrasound-assisted solketal synthesis using glycerol and acetone as raw material and sulfated zirconia as catalyst. Effect of six factors, including reactant ratio (1:2–1:6), catalyst dosage (0.5–1.5 wt%), ultrasound voltage (180–220 V), tip depth (0.5–1.5 cm), time of reaction (10–20 min) and temperature of reaction (30°–50 °C) on glycerol conversion were studied. The significant factors obtained from Box-Behnken Design (BBD) were in the order of reactant ratio > ultrasonic voltage > catalyst dosing for fixed tip depth, temperature, and time of 1 cm, 50 °C and 15 min, respectively. Then, the reaction was carried out at the optimum reactant ratio (glycerol: acetone) 1:6, ultrasonic voltage 200 V, catalyst dosing 0.5 wt%. The conversion of glycerol was estimated from the results of ultrasonic velocity measurement, and the same was later cross-verified by TLC and GC–MS analysis. Further acidity of the catalyst (Zr-S-400) was increased by increasing acid concentration (0.5 M, 0.7 M and 1 M H 2 SO 4 ) and Zr-S-0.5, Zr-S-0.7, and Zr-S-1 catalysts were synthesized. Catalysts were characterized by FESEM, EDAX, XRD, BET and Ammonia TPD. At the optimum condition of the reaction, a high glycerol conversion (94%) with solketal selectivity (91.5%) was achieved using Zr-S-1 as the catalyst. The sulfated zirconia catalyst demonstrated remarkable reusability, maintaining consistent glycerol conversion and solketal selectivity over 4 consecutive cycles. The present study represents a novel ultrasound-assisted solketal synthesis using sulfated zirconia as a catalyst, achieving high glycerol conversion and selectivity under mild conditions with excellent catalyst eusability for sustainable biomass conversion.
environmental sciences
What problem does this paper attempt to address?