Abstract:Incorporating a polymer dielectric blend with amine‐functionalized units facilitates low voltage operation of bispentafluorophenoxy silicon phthalocyanine in organic thin film transistors (OTFTs) while maintaining high charge mobility. Low‐cost and high‐performance electronics based on synthetically simple materials are required to fuel the deployment of smart packaging and wearable electronics. Metal phthalocyanines (MPcs) are promising semiconductors for use in n‐type organic thin film transistors (OTFTs) but often require high operating voltages. The first silicon phthalocyanine‐based OTFT with a polymer dielectric is reported as an alternative to traditional metal oxide dielectrics. Incorporating poly(methyl methacrylate) (PMMA) as the dielectric successfully reduces the threshold voltage (VT) of bispentafluorophenoxy SiPc (F10‐SiPc) from 14.9V to 7.3V while retaining high mobility. Further reduction in VT is obtained by using copolymers and blends of PMMA and dimethylamino ethyl methacrylate (DMAEMA)‐containing polymers, where a higher molar fraction of DMAEMA leads to a consistent drop in VT to ‐0.7 V. The electron‐donating groups of the tertiary amines in the DMAEMA show clear interfacial doping of the semiconductor, reducing the voltage required to populate the dielectric/semiconductor interface with charge carriers and turn on the device. Blending trace amounts of DMAEMA‐containing copolymers with PMMA proves to be an effective strategy for reducing the VT while keeping the charge mobility high, unlike when using pure copolymers with elevated DMAEMA content. Time of flight secondary ion mass spectroscopy (ToF‐SIMS) and X‐ray photoelectron spectroscopy (XPS) demonstrate that the DMAEMA‐containing copolymer is floating to the surface of the PMMA blend at the dielectric–semiconductor interface, which explains the reduced VT. Synchrotron scanning transmission X‐ray microscopy (STXM) demonstrates that PMMA promotes a more edge‐on orientation of F10‐SiPc films, compared to the more face‐on orientation when deposited on the DMAEMA containing copolymer. This study demonstrates a straightforward process for designing dielectric polymers and their blends for the reduction in VT for n‐type OTFTs.

Ultra‐Low Threshold Voltage in N‐Type Organic Electrochemical Transistors Enabled by Organic Mixed Ionic‐Electronic Conductors with Dual Electron‐Withdrawing Substitutions

Vertical Organic Electrochemical Transistors for Complementary Circuits

Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors

n-Type Ion Gel Gated Vertical Organic Electrochemical Transistors Based on Benzodifurandione-based Oligo( p -phenylene vinylene)s

Influence of Molecular Weight on the Organic Electrochemical Transistor Performance of Ladder‐Type Conjugated Polymers

A Competitive n‐Type OECT Material via Copolymerization of Electron Deficient Building Blocks

Threshold Voltage Control in Dual-Gate Organic Electrochemical Transistors

Green Synthesis of Lactone‐Based Conjugated Polymers for n‐Type Organic Electrochemical Transistors

Vertical organic electrochemical transistor platforms for efficient electropolymerization of thiophene based oligomers

Improved Stability and Performance of an N-Type Depletion Mode Poly(benzodifurandione) Based Organic Electrochemical Transistor Via Electrolyte Selection

Electron Donating Functional Polymer Dielectrics to Reduce the Threshold Voltage of n‐Type Organic Thin‐Film Transistors

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

Highly Efficient All‐Solution‐Processed Low‐Voltage Organic Transistor with a Micrometer‐Thick Low‐k Polymer Gate Dielectric Layer

Polymer Electret Improves the Performance of the Oxygen-Doped Organic Field-Effect Transistors

Switching p-type to high-performance n-type organic electrochemical transistors via doped state engineering

Tuning Organic Electrochemical Transistor Threshold Voltage using Chemically Doped Polymer Gates

Facilely Accessible Porous Conjugated Polymers toward High-Performance and Flexible Organic Electrochemical Transistors

Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables high‐Performance Electrochemical Transistors

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Acceptor Functionalization via Green Chemistry Enables High‐Performance n‐Type Organic Electrochemical Transistors for Biosensing, Memory Applications

Modulation Doping for Threshold Voltage Control in Organic Field-Effect Transistors