Abstract:Two second-phases with an opposite potential difference to the α-Mg matrix may affect the discharge mechanism of magnesium (Mg) anodes for primary Mg-air cells through different micro-galvanic behaviors. Herein, using Mg–Ca- x Sn alloys anode with Mg 2 Ca and CaMgSn phases, we investigated their influence on the dissolution mode of Mg-anode during discharge state via in-situ scanning vibrating electrode technique (SVET) technology. Firstly, the peak surface positive potential of Mg–1Ca alloy only containing Mg 2 Ca phase and Mg–1Ca–1Sn alloy with CaMgSn/Mg 2 Ca phase increases multiplied by 10 during the discharge process compared to that of OCP, exhibiting accelerated anodic substrate dissolution. Moreover, Mg 2 Ca-phases can be attacked firstly while promoting the discharge of the α-Mg matrix surrounding them, leading to the preferential dissolution of grain boundaries and "chunk effects (CE)" occurrence. More CaMgSn/α-Mg couples are activated to form dispersed micro-galvanic cell islands, which also boosts the dissolution of the α-Mg matrix but reduces the area of high-intensity dissolution reaction due to CaMgSn acting as a cathode. However, excessive CaMgSn-phase generally fails to discharge effectively to reduce anode efficiency, although it can improve the self-peeling capacity of the film layer through physical detachment; in addition, with Sn content increasing to 3 wt%, the open circuit voltage of Mg–1Ca–3Sn significantly declines. Mg–1Ca-0.2Sn exhibits the highest cell voltage and anodic efficiency by introducing a tiny amount of dispersed short rod-like CaMgSn, due to the adjusted dissolution mode, enhanced electrochemical activity and inhibited CE. Finally, our study provides a universal mechanism for fabricating Mg-anode with high performance via phase composition modulation.

Electrochemical detection of univalent Mg cation: A possible explanation for the negative difference effect during Mg anodic dissolution

The positive difference effect and anomalous hydrogen evolution on the anodically polarized Mg surface in alkaline NH4+ containing solutions

Corrosion Behavior of Pure Mg Based on Generation/Collection and Feedback Modes of Scanning Electrochemical Microscopy

The Evolution of Anodic Hydrogen on High Purity Magnesium in Acidic Buffer Solution

On the origin of univalent Mg$^+$ ions in solution and their role in anomalous anodic hydrogen evolution

Phase-field Simulation of Magnesium-Metal Anode Interface Growth in Different Electrolytes During Electrodeposition

Electrochemical investigation of the anodic hydrogen evolution on MgZn 2 , Mg 2 Si, and Al 4 Cu 2 Mg 8 Si 7 intermetallic phases

Comparative, Real-Time in Situ Monitoring of Galvanic Corrosion in Mg-Mg2Ca and Mg-MgZn2 Couples in Hank's Solution

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Synergy of coordination and trace ionization from co-solvents enables reversible magnesium electroplating/stripping behavior

Electrochemical study of active dissolution for aluminum in neutral NaCl solution

An Electrochemically Activated Nanofilm for Sustainable Mg Anode with Fast Charge Transfer Kinetics

A novel electrochemical deintercalation for magnesium ions separation and purification in manganese metallurgy

Possibilities and Limitations of Scanning Electrochemical Microscopy of Mg and Mg Alloys

In-situ Multimodal Imaging and Spectroscopy of Mg Electrodeposition at Electrode-Electrolyte Interfaces

Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi-in situ SEM approach and first-principles calculation

Illustrating the influence of anodic/cathodic second-phases on dissolution mode via Mg–Ca–Sn alloy anodes for primary Mg-air cells

Prussian Blue Analogues as Positive Electrodes for Mg Batteries: Insights into Mg2+ Intercalation

Contribution of the oxygen reduction reaction to the electrochemical cathodic partial reaction for Mg-Al-Ca solid solutions

Effect of Negative Pulse on the Stability of Black Electrolytes for Magnesium Alloy Microarc Oxidation

In situ AFM of interfacial evolution at magnesium metal anode