Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

One-step electrodeposited CoSe2 nano-reticular with high electroconductivity and electrocatalytic as a counter electrode for dye sensitized solar cell

CoSe2@N-Doped Graphene Nanocomposite High-Efficiency Counter Electrode for Dye-Sensitized Solar Cells

CoSe2/N-Doped Carbon Hybrid Derived from ZIF-67 As High-Efficiency Counter Electrode for Dye-Sensitized Solar Cells

Single-crystal Cobalt Selenide Nanobelt As a Highly Efficient Cathode for Stable Quasi-Solid-state Dye Sensitized Solar Cell

In Situ Electrodeposition of Nickel Cobalt Selenides on FTO As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Efficient Dye-Sensitized Solar Cells with Cose/Graphene Composite Counter Electrodes

Cobalt selenide/tin selenide hybrid used as a high efficient counter electrode for dye-sensitized solar cells

CoS2–graphene Composite As Efficient Catalytic Counter Electrode for Dye-Sensitized Solar Cell

Development of binary transition metallic selenide (NiSe/Co3Se4) hybrid counter electrode for highly efficient Pt-free dye-sensitized solar cells

Iron cobalt selenide counter electrode for application in dye-sensitized solar cell: synthesis parameter, structural, electrochemical, and efficiency studies

Cobalt Selenide Hollow Nanorods Array with Exceptionally High Electrocatalytic Activity for High-Efficiency Quasi-Solid-state Dye-Sensitized Solar Cells

Electrodeposition of nanostructured cobalt selenide films towards high performance counter electrodes in dye-sensitized solar cells

Encapsulating CoS2-CoSe2 Heterostructured Nanocrystals in N-doped Carbon Nanocubes As Highly Efficient Counter Electrodes for Dye-Sensitized Solar Cells.

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

CoS-Graphene Composite Counter Electrode for High Performance Dye-Sensitized Solar Cell

In Situ Growth of Co0.85se and Ni0.85se on Conductive Substrates As High-Performance Counter Electrodes for Dye-Sensitized Solar Cells

Enhanced photovoltaic performance of dye-sensitized solar cells based on electrodeposited sulfur-doped MSex (M=Co, Ni) films

FeS2/FeCoS2 nanoparticles/reduced graphene oxide interfacial composite structure as highly reactive counter electrodes in dye-sensitized solar cells

Facile Fabrication of an SnSx‐SnO2‐Decorated Cobalt Sulfide Film as an Effective Counter Electrode for Dye‐Sensitized Solar Cells

N, S Co-doped carbon-encapsulated CoS(Co9S8) hybrid counter electrodes for dye-sensitized solar cells

Phase-Selective Synthesis of Cobalt Sulfide Heterostructure Catalysts As Efficient Counter Electrodes in Dye-Sensitized Solar Cells.