Broadband Short-Wave Infrared Light-Emitting Diodes Based on Cr 3+ -Doped LiScGeO 4 Phosphor

Shihai Miao,Yanjie Liang,Yan Zhang,Dongxun Chen,Xiao-Jun Wang

DOI: https://doi.org/10.1021/acsami.1c10490

2021-07-21

Abstract:Short-wave infrared (SWIR) spectroscopy has recently emerged as an important technology across a wide range of areas, whether industrial, biomedical, or environmental. Nevertheless, it is still a long-standing challenge to develop robust SWIR light sources. The SWIR phosphor-convert light emitting diodes (LEDs) by coating blue LED chips with desirable SWIR-emitting phosphors are becoming an ideal alternative for solid-state SWIR light sources due to its compactness, low-cost, and long operating lifetime, as does the commercial white LEDs. Herein, we report a blue-pumped Cr3+-doped LiScGeO4 SWIR phosphor as a luminescent converter for phosphor-convert SWIR LEDs. This phosphor shows an intense SWIR emission band with a peak wavelength at ∼1120 nm owing to the 4T2 → 4A2 electron transition of Cr3+ when exciting with blue light. The full width at half-maximum (fwhm) of the phosphor is ∼300 nm and the absolute quantum efficiency is determined to be ∼26%. SWIR LED prototypes are constructed by combining the optimized phosphor materials with commercial blue InGaN LED chips, which can generate a commendable emission band in the SWIR region over 800–1600 nm and achieve a maximum output power of ∼4.78 mW at 60 mA with the photoconversion efficiency of 4.4%. The current exploration of Cr3+-doped SWIR-emitting phosphors will lay the foundation to engineer phosphor-convert SWIR LEDs for applications in night-vision surveillance and SWIR spectroscopy technology. These blue-light-excitable SWIR-emitting phosphors can serve as an important complement to the spectral gap of the current Cr3+-doped phosphors in the SWIR region and will pave the way toward cost-effective phosphor-converted solid-state SWIR light sources.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10490.Calculated lattice parameters for LiScGeO4:Cr3+ phosphor, output power values, absorption spectra, excitation and emission spectra at 77 K, the relationships of lg(x) versus lg(I/x), the fwhm values LiScGeO4:1%Cr3+ phosphor under different temperature, the plot of ln[(I0/I)−1] versus 1/kT, excitation line of BaSO4 and emission spectrum of the selected LiScGeO4:1%Cr3+ phosphor using an integrating sphere, and electroluminescence spectrum of the fabricated SWIR-LED device for photoelectric efficiency measurement (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology