Abstract:Background: As photoacoustic (PA) techniques progress towards clinical adoption, providing a high-speed live feedback becomes a high priority. To keep up with the instantaneous optical feedback of conventional light microscopes, PA imaging would need to provide a high-resolution video-rate live feed to the user. However, conventional PA microscopy typically trades resolution, sensitivity and imaging speed when optically scanning due to the difficult opto-acoustic confocal geometry. Here, we employ photoacoustic remote sensing (PARS), an all-optical technique that relies on optical confocal geometry, to provide a high-resolution live display in a reflection-mode PA architecture. Methods: Employing a conventional x-y galvanometer scanner and a 600 KHz pulse repetition rate laser we implement a system capable of acquiring 2.5 frames per second in 2D. To complement this fast scanning optical system, we implement a computationally inexpensive image reconstruction method that is able to render the frames with minimal overhead, providing a live display. Results: Employing the proposed method, we demonstrate a live feedback with frame rates as high as 2.5 Hz in 2D and also report the first results of 3D imaging with a non-contact label-free reflection-mode technique. The method is validated with phantom studies and in-vivo imaging. Employing a repetition rate of 600 KHz, a live feed of carbon fibers is realized with a C-scan rate of 2.5 Hz. The imaging resolution was measured to be 1.2 µm, the highest reported for a real-time reflection-mode architecture. The mean and peak SNR were measured to be 44 and 62 dB respectively in-vivo. 3D visualizations of carbon fiber phantoms and mouse ear microvasculature structure are also demonstrated. Conclusions: In summary, we present a method that has a small computational overhead for image rendering, resulting in a live display capable of real-time frame rates. We also report the first 3D imaging with a non-contact label-free reflection-mode PA technique. The all-optical confocal geometry required by PARS is significantly easier to implement and maintain than the opto-acoustic geometry of conventional PA microscopy techniques. This results in a system capable of high resolution and sensitivity, imaging at real-time rates. The authors believe this work represents a vital step towards a clinical high-resolution reflection-mode video-rate PA imaging system.

Fast photoacoustic-guided depth-resolved Raman spectroscopy: a feasibility study

Fast-scanning photoacoustic microscopy with a side-looking fiber optic ultrasound sensor

Photoacoustic microscopy for real-time monitoring of near-infrared optical absorbers inside biological tissue

Snapshot depth sensitive Raman spectroscopy in layered tissues

A Simultaneous Multi-Probe Detection Label-Free Optical-Resolution Photoacoustic Microscopy Technique Based on Microcavity Transducer

Live feedback and 3D photoacoustic remote sensing

Broadband surface plasmon resonance sensor for fast spectroscopic photoacoustic microscopy

All-fiber miniature non-contact photoacoustic probe based on photoacoustic remote sensing microscopy for vascular imaging in vivo

Freehand scanning photoacoustic microscopy with simultaneous localization and mapping

Flexible Depth-of-focus, Depth-Invariant Resolution Photoacoustic Microscopy with Airy Beam

Photoacoustic Microscopy Achieved by Microcavity Synchronous Parallel Acquisition Technique

Functional photoacoustic microscopy for high-resolution and noninvasive in vivo imaging

Photoacoustic signal simulation and detection optimization based on laser-scanning optical-resolution photoacoustic microscopy

Miniature non-contact photoacoustic probe based on fiber-optic photoacoustic remote sensing microscopy

Listening to Light by Fast Photoacoustic Tomography Based on a Digital Phased Array System

Super-contrast Photoacoustic Resonance Imaging

Motionless Volumetric Photoacoustic Microscopy with Spatially Invariant Resolution

Confocal Visible/nir Photoacoustic Microscopy of Tumors with Structural, Functional, and Nanoprobe Contrasts

Optical-resolution photoacoustic microscopy with a needle-shaped beam

High-speed Functional Photoacoustic Microscopy Using a Water-Immersible Two-Axis Torsion-Bending Scanner

Multi-element synthetic aperture focusing photoacoustic imaging system with real-time digital beamformer technique