Abstract:AbstractThe application of horizontal well drilling coupled with the multistage fracturing technology enables commercial development of shale gas formations. To optimize the shale gas development, the transient gas flow in a shale formation is of great research interest. Due to anano-scale pore radius, the gas flow in shale matrix may fall in flow regimes which include viscous flow, slip flow and Knudsen diffusion. On top of that, gas adsorption/desorption and stress-sensitivity are some other important phenomena in shales. In this paper, we introduce a novel numerical simulation scheme to depict the above phenomena and predict the gas production from a multi-stage fractured horizontal well, which is crucial for the shale gas development.Instead of Darcy's equation, we implement the apparent permeability in the continuity equation to depict the gas flow (viscous flow, slip flow and Knudsen diffusion) in shale matrix. An adsorption/desorption term is included in the continuity equation as an accumulation term. A sink which is based on Peaceman's well model is placed at the center of the fracture cell. Uniform fluid flow from matrix to fractures is assumed. Only viscous flow is considered in the fractures and the permeability of the fractures doesnot change with pressure. The model is validated via comparing with an infinity-conductivity fracture model. Moreover, the lab data of Eagle Ford shale which provides the relationship between matrix permeability and the effective stress is integrated into the two-way coupling geomechanical process to simulate a stress-sensitive shale formation. Furthermore, the Langmuir and BET models will be compared to investigate the detailed adsorption/desorption process.This methodology examines the influence of each mechanism for the transient shale gas flow. Instead of conventional pressure-independent Darcy permeability, the apparent permeability increases with the development of a shale gas reservoir, which leads to higher productivity. With the gas adsorption/desorption, the reservoir pressure is maintained via the supply of released gas from nano-scale pore wall surfaces, which also leads to higher gas production. In addition, it yields a 5% difference for the cumulative production for one yearbetween the Langmuir and BET models. With the consideration of geomechanics, the apparent permeability is decreased due to the compaction of nano-scale pores, which leads to a decrease in productivity. Due to the difference of compaction magnitude for each grid block, geomechanics creates additional heterogeneity for anano-pore network in a shale formation, which we should pay more attention to.A novel methodology is introduced to examine the crucial phenomena in a shale formation, which simultaneously takes into account the influence of flow regimes, gas adsorption/desorption and stresssensitivity. On top of that, the productivity of a multi-stage fractured horizontal well is quantified. We provide an effective way to quantify the above effects for the transient gas flow in shale formations.

Improving the Prediction of Production Loss in Heterogeneous Tight Gas Reservoirs Using Dynamic Threshold Pressure

Quantifying Controls on Threshold Pressure during CO 2 Injection in Tight Gas Reservoir Rocks

Experimental study on the dynamic threshold pressure gradient of high water-bearing tight sandstone gas reservoir

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

Prediction Model for Tight Gas Wells with Time-Dependent Mechanism and Stress Sensitivity Effect

Pressure Transient Behaviours of Vertical Wells in Low Permeability Reservoirs with Threshold Pressure Gradient

A Practical Semi-Analytical Model for Production Prediction of Fractured Tight Gas Wells with Multiple Nonlinear Flow Mechanisms

Mathematical Simulation about Gas Transport in a Dual-Porosity Tight Gas Reservoir considering Multiple Effects

An Innovative Production Prediction Model for Fractured Horizontal Wells in Low‐Permeability Gas Reservoirs Accounting for Proppant Embedment

Pressure Transient Analysis of Low Permeability Reservoir with Pseudo Threshold Pressure Gradient

The Influence of Pressure Depletion on Critical Producing Pressure Differential and Productivity Evaluation of Reservoirs

An Interpretation Method for a Gas Production Profile Based on the Temperature and Pressure Behavior of Low-Permeability Gas Reservoirs

An Unsteady-State Productivity Model and Main Influences on Low-Permeability Water-Bearing Gas Reservoirs at Ultrahigh Temperature/High Pressure

A quadruple-porosity model for transient production analysis of multiple-fractured horizontal wells in shale gas reservoirs

Influence of reservoir lithology on porous flow resistance of gas-bearing tight oil reservoirs and production forecast

Multi-parameter modeling for prediction of gas–water production in tight sandstone reservoirs

An Integrated Numerical Simulation Scheme to Predict Shale Gas Production of a Multi-Fractured Horizontal Well

Pressure Transient Behaviors of Hydraulically Fractured Horizontal Shale-Gas Wells by Using Dual-Porosity and Dual-Permeability Model

Theoretical investigation of threshold pressure gradient in hydrate-bearing clayey-silty sediments under combined stress and local thermal stimulation conditions

Numerical prediction of the decline of the shale gas production rate with considering the geomechanical effects based on the two-part Hooke’s model

Tight carbonate gas well deliverability evaluation and reasonable production proration analysis