Abstract:Abstract A rigorous and efficient numerical method for simulation of shale gas production considering complex hydraulic and natural fracture geometries and multiple gas transport mechanisms in nanopores is very important to evaluate stimulation effectiveness. In this study, we present an innovative EDFM (Embedded Discrete Fracture Model) method in conjunction with the third-party compositional reservoir simulator to simulate shale gas production considering all these complexities. Through the EDFM method, complex hydraulic and natural fractures can be directly and explicitly embedded in the matrix blocks. The complex fracture geometries can easily be handled without using local grid refinement near fractures or using unstructured gridding technique. In addition, gas transport mechanisms such as non-Darcy flow, gas desorption, gas slippage and pressure-dependent matrix permeability and fracture conductivity are included in the model. The LBM (lattice Boltzmann method) was used to model gas slippage phenomenon in nanopores. We verified the EDFM method against the LGR (local grid refinement) method for dealing with simple bi-wing fractures and the computational efficiency was also compared. After validation, we applied the EDFM method to perform history matching and production forecasting for an actual shale-gas well from Marcellus shale formation. Both simple and complex fracture geometries were considered and compared. Complex fracture geometry was predicted by a fracture propagation model considering natural fractures. Through history matching, conductivities of hydraulic fractures, active and non-active natural fractures were determined. The complex fracture geometry performs better in terms of productivity than the simple fracture geometry due to a larger amount of conductive fracture surface area. The simulation results based on an actual shale-gas well show that gas desorption and gas slippage significantly affects ultimate gas recovery, which can increase gas recovery after 30 years by 46.8%. Pressure-dependent matrix permeability and fracture conductivity play a negative impact on well productivity, which can reduce gas recovery after 30 years by 14%. Hence, complex fracture geometries and gas transport mechanisms should be properly accounted for in the numerical model in order to achieve more accurate long-term production forecasting of shale-gas wells.

An Innovative Production Prediction Model for Fractured Horizontal Wells in Low‐Permeability Gas Reservoirs Accounting for Proppant Embedment

A Practical Semi-Analytical Model for Production Prediction of Fractured Tight Gas Wells with Multiple Nonlinear Flow Mechanisms

A Semianalytical Production Prediction Model and Dynamics Performance Analysis for Shale Gas Wells

Prediction Model for Tight Gas Wells with Time-Dependent Mechanism and Stress Sensitivity Effect

A Productivity Prediction Model for Multistage Fractured Horizontal Wells in Shale Gas Reservoirs

Production induced fracture closure of deep shale gas well under thermo-hydro-mechanical conditions

Productivity Prediction Model for Stimulated Reservoir Volume Fracturing in Tight Glutenite Reservoir Considering Fluid-Solid Coupling

Production forecasting for shale gas reservoirs with nanopores and complex fracture geometries using an innovative non intrusive EDFM method

Production performance simulation of a horizontal well in a shale gas reservoir considering the propagation of hydraulic fractures

Productivity Model Study of Water-Bearing Tight Gas Reservoirs Considering Micro- to Nano-Scale Effects

Production forecast of fractured shale gas reservoir considering multi-scale gas flow

Stability Evaluation of Proppant in Fractures of Gas Storage in Yulin Gas Field

Refractured Well Hydraulic Fractures Optimization in Tight Sandstone Gas Reservoirs: Application in Linxing Gas Field

Numerical simulation of fractured vertical well in low-permeable oil reservoir with proppant distribution in hydraulic fracture

An Analytical Model for Production Analysis of Hydraulically Fractured Shale Gas Reservoirs Considering Irregular Stimulated Regions

Study on the Vertical Propagation Behavior of Hydraulic Fractures in Thin Interbedded Tight Sandstone

Simulation of the Production Performance of Fractured Horizontal Wells in Shale Gas Reservoirs Considering the Complex Fracture Shape

Impact of Stress-Dependent Matrix and Fracture Properties on Shale Gas Production

A New Approach to Embed Complex Fracture Network in Tight Oil Reservoir and Well Productivity Analysis

Production Performance Simulation of the Fractured Horizontal Well Considering Reservoir and Wellbore Coupled Flow in Shale Gas Reservoirs

Evaluating the Effects of Proppant Flowback on Fracture Conductivity in Tight Reservoirs: A Combined Analytical Modeling and Simulation Study