Abstract:Graphene-doped ZnO nanoplates (G-ZNPs) were incorporated as a reinforcing material into polyvinyl alcohol (PVA) to prepare nanocomposite PVA/G-ZNP hydrogels through a cyclic freezing-thawing method. The mechanical properties, water content, gel fraction, swelling ratio, dye absorption, water contact angle, thermal stability, and antibacterial properties were explored. In addition, the nanocomposites were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The tensile strengths of the hydrogels increased from 1.9 to 2.2 MPa when the G-ZNP content ranged from 0 to 0.3 phr. The mechanical properties of the xerogels (obtained from freeze drying the hydrogels for 24 and 48 h) were the same as those of the hydrogels. Increasing the G-ZNP content improved the swelling ratio and dye absorption capacity because of the higher porosity, and the maximum ratio and capacity were reached when the G-ZNP content was 0.4 phr. The contact angle increased with addition of G-ZNP because of the more compact structures of the nanocomposite PVA/G-ZNP hydrogels and the lower surface roughnesses. The results of FTIR analyses showed that PVA underwent coordination reactions and hydrogen bonding with the G-ZNPs, and these synergistically enhanced the tensile strength of the PVA. The results of XRD analyses showed that with an increase in the G-ZNP content, the crystallinity of the xerogels first decreased and then increased. When the G-ZNP content was 0.3 phr, the crystallinity was the lowest, implying that at a content greater than 0.3 phr, the G-ZNP nanomaterials would not be well dispersed. Moreover, EDS analyses showed that the G-ZNPs were relatively uniformly dispersed in PVA hydrogels at a content of 0.3 phr. SEM analyses showed that incorporation of a small amount of G-ZNPs changed the microscopic morphology of the gels, and the three-dimensional network structure of the nanocomposite gels became dense. In addition, G-ZNPs enhanced the antibacterial and dye absorption abilities of the hydrogels.

High-performance antibacterial nanocomposite films with a 3D network structure prepared from carboxylated graphene and modified polyvinyl alcohol

Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging.

Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties

Macroscopic preparation of polylactic acid/graphene composite fiber film with efficient antibacterial and thermal properties

Ultra-tough poly(vinyl alcohol)/polydopamine/nanosilver nanocomposite films with enhanced antibacterial and antioxidant properties

Enhancement of tensile, thermal and barrier properties of polyphenylene sulfide/carboxylated graphene antibacterial nanocomposites

Synthesis of Poly(maleic Anhydride-Co-vinyl Chloride) Crosslinked Microspheres and Its Superior Enhancement in Mechanical Strength and Antibacterial Activity for Poly(vinyl Alcohol) Composite Films

In Situ Self-Assembly Chitosan/ε-Polylysine Bionanocomposite Film with Enhanced Antimicrobial Properties for Food Packaging.

Hydrophilic and absorption properties of reversible nanocomposite polyvinyl alcohol hydrogels reinforced with graphene-doped zinc oxide nanoplates for enhanced antibacterial activity

Green preparation of 3D micronetwork eugenol-encapsuled porous starch for improving the performance of starch-based antibacterial film

Improved Hydrophobic, UV Barrier and Antibacterial Properties of Multifunctional PVA Nanocomposite Films Reinforced with Modified Lignin Contained Cellulose Nanofibers

Enhanced antimicrobial activity of konjac glucomannan nanocomposite films for food packaging

Self-assembly of multilayered functional films based on graphene oxide sheets for controlled release

Fabrication of N-halamine/MWPPy-ZnO hybrids based cellulose nanofibril composite films with improved UV-protective, antibacterial, and biofilm control functions

Poly-(lactic acid) composite films comprising carvacrol and cellulose nanocrystal–zinc oxide with synergistic antibacterial effects

Synthesis of Carboxyl Cellulose Nanocrystals/Copper Nanohybrids to Endow Waterborne Polyurethane Film with Improved Mechanical and Antibacterial Properties

Preparation of composite films composed of polyvinyl alcohol, shellac and carboxymethyl chitosan-CuO nanoparticles and their application in food preservation

Development of anti-bacterial adhesion and antibacterial sulfobetaines modified chitosan/polyvinyl alcohol composite films as packaging materials

Highly transparent PVA/nanolignin composite films with excellent UV shielding, antibacterial and antioxidant performance

An antimicrobial film of silver/nanocellulose crystal/oxalic acid/polyvinyl alcohol with real-time bactericidal and prevention of biofilm formation properties

Preparation and characterization of N-isopropyl acrylamide grafted polyvinyl alcohol and chitosan blend films with hydrophobic and antibacterial properties