Abstract:The realization of a practical magnesium battery is combined with the development of a high kinetic cathode and compatible electrolyte to facilitate the redox process. For this reason, silver phosphate glasses in the binary system (Fe2O3-AgPO3) are prepared using the conventional quenching method. The glasses were defined in the form [Fe2O3]x[AgPO3](100-x) and the composition with 0  x  40 wt. %. The molar volumes and densities were measured. These glass systems were characterized using XRD, FTIR spectroscopy, UV–Vis-NIR spectrophotometer, electrochemical procedures and impedance spectroscopy. X-ray diffraction revealed that pristine AgPO3 sample was formed in a glassy state, whereas two crystalline phases (AgFeP2O7 and Fe2O3) were formed after the incorporation of Fe2O3 by different concentrations. Bond assignments associated with different functional groups were investigated by an FT-IR spectroscopy. The values of the band gap were decreased with the increase of Fe2O3 content. The effect of grains and grain boundaries in a heterostructure made up of Fe2O3 and AgFeP2O7 crystallites grown in silver phosphate glasses was studied using impedance spectroscopy. The complex impedance, electrical conductivity, and complex electric modulus were measured in terms of frequency and temperature dependency in [Fe2O3]x-[AgPO3](1-x). In the studied glass systems, non-Debye relaxation was observed. Under a variable regime, ac conductivity follows a modified Jonscher's law Arrhenius fitting of multiple relaxation processes in the material yielded activation energy of (0.12 eV–0.271 eV) which support a Maxwell–Wagner relaxation model in the heterostructure glasses at high temperatures and low frequencies. The dc conductivity decreases with iron rate and follows the Arrhenius law with very low activation energy (0.12–0.27 eV. Mg//electrolyte//Glass coin cells are assembled and show an initial discharge capacity of up to ∼564 mAh/g. These materials are attractive for application in modernistic electrochemical devices because of their great compositional and preparation variety which enables tuning the types and techniques of electrical conduction in the material.

Cathode properties of sodium iron phosphate glass for sodium ion batteries

Activating the Inert Na1 Sites in Na<sub>2</sub>FePO<sub>4</sub>F Toward High Performance Sodium Storage

Characterization of Ionic Transport in Li2O-(Mn:Fe)2O3-P2O5 Glasses for Li Batteries

Properties and structure of sodium-iron phosphate glasses

Governing Mechanism of Ion Transport in Lithium-Iron-Phosphate Glasses

Exploring the Effect of V2O5 and Nb2O5 Content on the Structural, Thermal, and Electrical Characteristics of Sodium Phosphate Glasses and Glass–Ceramics

Atomic structure of sodium iron phosphate glasses

La2O3 Substitution in Li-Al-P-O-N Glasses for Potential Solid Electrolytes Applications

Structure–property relations of sodium iron phosphate nuclear waste glasses: Effects of iron redox ratio and glass composition

AC Electric Conductivity of High Pressure and High Temperature Formed NaFePO4 Glassy Nanocomposite

Correlation of Electrical Conductivity and Microstructure with the Band Gap of Oxysulfide Glass-Ceramics for Na-Ion Battery

Electrical and dielectric study of Na2/3Mn2/3Fe1/3O2 as cathode active materials for sodium-ion batteries

Microstructure, Electrical, Optical and Electrochemical Characteristics of Silver Phosphate Glasses Cathode for Magnesium Battery Applications

Enhancing glass anode performance for lithium‐ion batteries via crystallization

Lithium Storage Behavior of MoO3–P2O5 Glass As Cathode Material for Li-ion Batteries

High‐Entropy Doping Boosts Ion/Electronic Transport of Na4Fe3(PO4)2(P2O7)/C Cathode for Superior Performance Sodium‐Ion Batteries

Downsizing and coating effects on the electrochemical performance of Mn-doped iron fluorophosphate as cathode material for sodium-ion batteries

Electronic structure regulation of Na2FePO4F cathode toward superior high-rate and high-temperature sodium-ion batteries

Exploration of Iron-Based Mixed Polyanion Cathode Material for Thin-Film Sodium-Ion Batteries

Reassessment of Electrical and Dielectric Properties in the Borophosphate Glass System: A Promising Solid Electrolyte for High-Temperature Batteries

A Dual Anion Chemistry-Based Superionic Glass Enabling Long-Cycling All-Solid-State Sodium-Ion Batteries