High‐Entropy Doping Boosts Ion/Electronic Transport of Na4Fe3(PO4)2(P2O7)/C Cathode for Superior Performance Sodium‐Ion Batteries

Xiaochen Ge,Huangxu Li,Jie Li,Chaohong Guan,Xu Wang,Liang He,Simin Li,Yanqing Lai,Zhian Zhang

DOI: https://doi.org/10.1002/smll.202302609

IF: 13.3

2023-05-06

Small

Abstract:The fast charging capacity and stable crystal structure are enhanced via high‐entropy doing strategy for sodium‐ion batteries. The samples with high‐entropy doping display excellent durability under 5 C‐charging and 1C ‐discharging, which express capacity retention of 94.3% after 500 cycles. Fe‐based mixed phosphate cathodes for Na‐ion batteries usually possess weak rate capacity and cycle stability challenges resulting from sluggish diffusion kinetics and poor conductivity under the relatively low preparation temperature. Here, the excellent sodium storage capability of this system is obtained by introducing the high‐entropy doping to enhance the electronic and ionic conductivity. As designed high‐entropy doping Na4Fe2.85(Ni,Co,Mn,Cu,Mg)0.03(PO4)2P2O7 (NFPP‐HE) cathode can release 122 mAh g−1 at 0.1 C, even 85 mAh g−1 at ultrahigh rate of 50 C, and keep a high retention of 82.3% after 1500 cycles at 10 C. Besides, the cathode also exhibits outstanding fast charge capacity in terms of the cyclability and capacity with 105 mAh g−1 at 5 C/1 C, corresponding 94.3% retention after 500 cycles. The combination of in situ X‐ray diffraction, density functional theory, conductive‐atomic force microscopy, and galvanostatic intermittent titration technique tests reveal that the reversible structure evolution with optimized Na+ migration path and energy barrier boost the Na+ kinetics and improve the interfacial electronic transfer, thus improving performance.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the limitations of cathode materials in sodium - ion batteries (SIBs) in electrochemical performance, especially the deficiencies in electronic conductivity and sodium - ion diffusion kinetics. Specifically, the research has made improvements on the problems existing in the Na₄Fe₃(PO₄)₂(P₂O₇)/C (labeled as NFPP) material. Although NFPP has a moderate voltage platform (3.0 V vs Na⁺/Na) and a theoretical specific capacity (129 mAh g⁻¹), its poor electronic conductivity and slow sodium - ion diffusion kinetics limit its electrochemical performance, especially in terms of high - rate charge - discharge ability and fast - charging performance.

To solve these problems, the researchers introduced a high - entropy doping strategy. By partially replacing Fe atoms in the NFPP material, a Na₄Fe₂.₈₅(Ni,Co,Mn,Cu,Mg)₀.₀₃(PO₄)₂P₂O₇ (labeled as NFPP - HE) composite was formed. High - entropy doping not only improves the electronic and ionic conductivity of the material but also optimizes the crystal structure, thereby significantly enhancing the rate performance and cycle stability of the material. The experimental results show that the discharge specific capacity of NFPP - HE reaches 122 mAh g⁻¹ at 0.1 C, can still maintain a specific capacity of 85 mAh g⁻¹ at an ultra - high 50 C rate, and still maintains a capacity retention rate of 82.3% after 1500 cycles at 10 C. In addition, NFPP - HE also exhibits excellent fast - charging performance. Under 5 C/1 C charge - discharge conditions, the capacity retention rate after 500 cycles is 94.3%.

In general, this paper solves the key problems of NFPP materials in the application of sodium - ion batteries by introducing a high - entropy doping strategy, significantly improves the electrochemical performance of the material, and provides new ideas for the development of high - performance cathode materials for sodium - ion batteries.