Abstract:Purpose This study aimed to solve the engineering problem of free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams. The accurate identification of the crack damage depth, number and location depends on high-precision frequency and vibration mode solutions; therefore, it is critical to obtain these reliable solutions. The high-precision finite element method for the free vibration of cracked beams needs to be developed to grasp and control error information in the conventional solutions and the non-uniform mesh generation near the cracks. Moreover, the influence of multi-crack damage on the natural frequency and vibration mode of a circularly curved beam needs to be detected. Design/methodology/approach A scheme for cross-sectional damage defects in a circularly curved beam was established to simulate the depth, location and the number of multiple cracks by implementing cross-section reduction induced by microcrack damage. In addition, the h-version finite element mesh adaptive analysis method of the Timoshenko beam was developed. The superconvergent solution of the vibration mode of the cracked curved beam was obtained using the superconvergent patch recovery displacement method to determine the finite element solution. The superconvergent solution of the frequency was obtained by computing the Rayleigh quotient. The superconvergent solution of the eigenfunction was used to estimate the error of the finite element solution in the energy norm. The mesh was then subdivided to generate an improved mesh based on the error. Accordingly, the final optimised meshes and high-precision solution of natural frequency and mode shape satisfying the preset error tolerance can be obtained. Lastly, the disturbance behaviour of multi-crack damage on the vibration mode of a circularly curved beam was also studied. Findings Numerical results of the free vibration and damage disturbance of cracked curved beams with cracks were obtained. The influences of crack damage depth, crack damage number and crack damage distribution on the natural frequency and mode of vibration of a circularly curved beam were quantitatively analysed. Numerical examples indicate that the vibration mode and frequency of the beam would be disturbed in the region close to the crack damage, and a greater crack depth translates to a larger frequency change. For multi-crack beams, the number and distribution of cracks also affect the vibration mode and natural frequency. The adaptive method can use a relatively dense mesh near the crack to adapt to the change in the vibration mode near the crack, thus verifying the efficacy, accuracy and reliability of the method. Originality/value The proposed combination of methodologies provides an extremely robust approach for free vibration of beams with cracks. The non-uniform mesh refinement in the adaptive method can adapt to changes in the vibration mode caused by crack damage. Moreover, the proposed method can adaptively divide a relatively fine mesh at the crack, which is applied to investigating free vibration under various curved beam angles and crack damage distribution conditions. The proposed method can be extended to crack damage detection of 2D plate and shell structures and three-dimensional structures with cracks.

Inclined Curved Crack Composite Beam: Experimental and Computational Analysis with Recycled Aluminum Composite Materials and Comparison with an Artificial Neural Network

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

A concerted experimental and numerical approach for frequency based non-destructive analysis of Bi-directional cracked laminated composite beams

Crack propagation modeling of strengthening reinforced concrete deep beams with CFRP plates

Modal Analysis of Cracked Cantilever Beam by Finite Element Simulation

Fracture Modeling of Curved Composite Shell Structures Using Augmented Finite Element Method

Deflection and Crack Calculation of Corroded Reinforced Concrete Beams

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Dynamic analysis of extensible beam with multiple cracks

Free Vibration Analysis of Horizontally Curved Composite Concrete-Steel I-Girder Bridges

Numerical analysis of natural frequency and stress intensity factor in Euler–Bernoulli cracked beam

Vibration based damage detection for hybrid composite cantilever beam using finite element analysis and artificial neural network

Free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams

Vibration analysis of cracked beam based on Reddy beam theory by finite element method

Damage quantification of a metallic beam under thermo-mechanical loads using novel empirical correlations and neural network

A modeling method for vibration analysis of cracked laminated composite beam of uniform rectangular cross-section with arbitrary boundary condition

EXPERIMENTAL RESEARCH AND NUMERICAL SIMULATION OF 3D MULTI-DIRECTIONAL CRACKING IN RC BEAM

Role of Dynamic Response in Inclined Transverse Crack Inspection for 3D-Printed Polymeric Beam with Metal Stiffener

Digital image correlation and cracked hinge model applied to notched beams reinforced with GFRP bars

Dynamic analysis of double cracked bi-directional functionally graded nanobeam using the differential quadrature method