Abstract:Bio-based poly(lactic acid) (PLA) composite films were produced using unmodified soda micro- or nano-lignin as a green filler at four different contents, between 0.5 wt% and 5 wt%. The PLA–lignin composite polymers were synthesized by solvent casting to prepare a masterbatch, followed by melt mixing. The composites were then converted into films, to evaluate the effect of lignin content and size on their physicochemical and mechanical properties. Differential scanning calorimetry (DSC), supported by polarized light microscopy (PLM), infrared spectroscopy (FTIR-ATR), X-ray diffraction (XRD), and transmission electron microscopy (TEM) were employed to investigate the PLA crystallization and the interactions with Lignin (L) and Nanolignin (NL). The presence of both fillers (L and NL) had a negligible effect on the glass transition temperature (chain diffusion). However, it resulted in suppression of the corresponding change in heat capacity. This was indicative of a partial immobilization of the PLA chains on the lignin entities, due to interfacial interactions, which was slightly stronger in the case of NL. Lignin was also found to facilitate crystallization, in terms of nucleation; whereas, this was not clear in the crystalline fraction. The addition of L and NL led to systematically larger crystallites compared with neat PLA, which, combined with the higher melting temperature, provided indications of a denser crystal structure in the composites. The mechanical, optical, antioxidant, and surface properties of the composite films were also investigated. The tensile strength and Young's modulus were improved by the addition of L and especially NL. The UV-blocking and antioxidant properties of the composite films were also enhanced, especially at higher filler contents. Importantly, the PLA–NL composite films constantly outperformed their PLA–L counterparts, due to the finer dispersion of NL in the PLA matrix, as verified by the TEM micrographs. These results suggest that bio-based and biodegradable PLA films filled with L, and particularly NL, can be employed as competitive and green alternatives in the food packaging industry.

Green Engineering: Poly (lactic acid) Composite Materials Fortified with Surface-Modified Nanocellulose from Borassus flabellifer Leaves

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Durable polylactic acid bionanocomposites with biomass-derived nanocellulose additives: Recent advances in production

Wholly Bio-based, Ultra-tough, Transparent PLA Composites Reinforced with Nanocellulose and Nanochitin

Poly(lactic acid)/nanocellulose biocomposites for sustainable food packaging

Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils

Modified Biomass-Reinforced Polylactic Acid Composites

Bio-based Green Composites with High Performance from Poly(lactic Acid) and Surface-Modified Microcrystalline Cellulose

Modified Cellulose Nanocrystals Enhanced the Compatibility Between PLA and PBAT to Prepare a Multifunctional Composite Film

Effect of nano-cellulosic fiber on mechanical and barrier properties of polylactic acid (PLA) green nanocomposite film

Effect of Micro- and Nano-Lignin on the Thermal, Mechanical, and Antioxidant Properties of Biobased PLA–Lignin Composite Films

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Biocomposites from Polylactic Acid and Bacterial Cellulose Nanofibers Obtained by Mechanical Treatment

Comprehensive characterization of novel Borassus flabellifer flower biomass based microcrystalline cellulose reinforced with polylactic acid (PLA) biofilm for futuristic applications

Biocomposites and bionanocomposites from poly(lactide) and cellulosic materials – a review

Strong, bacteriostatic and transparent polylactic acid-based composites by incorporating quaternary ammonium cellulose nanocrystals

Preparation of nanofibrillated cellulose and application in reinforced PLA/starch nanocomposite film

Polylactic Acid/Lignin Composites: A Review

Preparation and Characterization of Polylactic Acid/Bamboo Fiber Composites.

Biobased Composites of Poly(Lactic Acid) Melt Compounded with Bacterial and Vegetal Nanocelluloses Incorporated through Different Strategies