Abstract:We need batteries to get the best out of renewable energies and other low-carbon energy sources, and the most promising path forward is to invest in high-energy-density battery technologies. In this regard, lithium metal is the best candidate for the anode electrode as it is the lightest metal on earth and has the lowest electrochemical potential (-3.04 V vs. SHE). However, the challenge to overcome for mass commercializing lithium-metal batteries (LMB) is stabilizing the solid electrolyte interphase that naturally grows at the electrode-electrolyte interface to avoid uncontrolled reactions leading to lithium depletion. Since the successful introduction of lithium-ion batteries (LIB), it has been known that tuning of the SEI composition and morphology is fundamental to prolong the battery life span; a well-engineered SEI layer simultaneously serves as an electron barrier and favors Li+ ion conduction across it, ensuring proper battery performance. However, the engineering of the SEI layer in LMB is more complex than its counterpart LIB batteries, given that lithium metal is overwhelmingly more reactive than graphite and the overall Li+ ion current across it is orders of magnitude higher. The up-to-date knowledge on the SEI morphology indicates that inorganic phases produced upon the decomposition of lithium salts present in the electrolyte tends to grow dominantly buried within the SEI layer, acting as an intermediate between the surviving lithium metal and the outermost organic SEI phase grown after decomposition of solvent molecules. The effect of electrolyte additives and diluents is to tweak the SEI composition. The narrative built after years of experimentation tells that proper battery functioning depends heavily on the ability of the incoming Li+ ions to desolve near the SEI outermost layer without triggering further side reactions, penetrate the inner SEI, and deposit in the anode as reduced lithium. However, the intricacies of the elementary reactions and the stage where the reduction takes place still fall beyond detailed comprehension, even though the development of in situ and operando analytical techniques has brought us a level of understanding on the subject that was unimaginable a few decades ago. In this talk, we discuss the instrumental impact that multiscale modeling techniques have played in clarifying the elementary steps of the SEI formation on pristine lithium metal, providing a comprehensive understanding of the precursors formed in the early stages of Solid-Electrolyte Interphase (SEI) growth. For instance, density functional theory (DFT) calculations have revealed that electrolyte diluents, such as TTE, previously considered inert to lithium metal, actively modify the liquid electrolyte solvation structure by weakly interacting with Li+ ions. Additionally, these diluents decompose against lithium metal, releasing fluoride ions and inundating the SEI layer with LiF. Similarly, DFT-based molecular dynamics (MD) techniques, including ab initio (AIMD) and reactive classical molecular dynamics methods (ReaxFF MD, among others), have facilitated a picoseconds (ps) scale observation of the temporal evolution of these SEI precursors, propelling a mechanistic understanding of the dynamics of the SEI formation; it is now recognized that there is an initial and rapid electrolyte decomposition occurring within the first tens of picoseconds after contact with lithium metal, preceding a longer-scale mass transfer segregation process leading to the formation of a myriad of organic and inorganic microphases within the SEI structure. However, the accessible time and space windows to MD methods fall within few hundred ps, leaving out the study of the morphological aspects of the SEI over extended cycling. In this sense, we discuss through kinetic Monte Carlo (kMC) calculations the evolution of the SEI formation on lithium metal and confirm the critical role that dislocations and grain boundaries play in ensuring proper lithium plating and mobility within the SEI layer over cycling. We confirm that bulk lithium diffusion within the inorganic SEI microphases, such as LiF and Li 2 O, is significantly lower than lithium mobility across LiF/Li 2 O interfaces. We also discuss the impact of electrolyte tunning on SEI morphology and provide insights into developing an SEI formation strategy based on the electrolyte molecules electrochemical stability and their relative contents of heteroatom species, such as F and O, to seed in the SEI composition and morphology, which we believe could have a significant impact on the development of stable LMB batteries.

Electro‐Chemo‐Mechanical Modeling of Artificial Solid Electrolyte Interphase to Enable Uniform Electrodeposition of Lithium Metal Anodes (Adv. Energy Mater. 9/2022)

An Artificial Solid Electrolyte Interphase with High Li‐Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

Solid Electrolyte Interphase: the Failure of Solid Electrolyte Interphase on Li Metal Anode: Structural Uniformity or Mechanical Strength? (adv. Energy Mater. 10/2020)

Recent Progress in Understanding Solid Electrolyte Interphase on Lithium Metal Anodes

Materials chemistry among the artificial solid electrolyte interphases of metallic lithium anodes

Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode

Modeling the Electro-Chemo-mechanical Failure at the Lithium-Solid Electrolyte Interface: Void Evolution and Lithium Penetration

Solid Electrolyte Interphases: Review of Emerging Concepts in SEI Analysis and Artificial SEI Membranes for Lithium, Sodium, and Potassium Metal Battery Anodes (Adv. Energy Mater. 43/2020)

Atomistic Modeling of the Electrode–Electrolyte Interface in Li-Ion Energy Storage Systems: Electrolyte Structuring

Mechanistic Study of Lithium Electrodeposition Using Dynamic Electrochemical Impedance Spectroscopy

Promoting Mechanistic Understanding of Lithium Deposition and Solid‐Electrolyte Interphase (SEI) Formation Using Advanced Characterization and Simulation Methods: Recent Progress, Limitations, and Future Perspectives

Computational Exploration of the Li-Electrode|Electrolyte Interface in the Presence of a Nanometer Thick Solid-Electrolyte Interphase Layer

Species Distribution During Solid Electrolyte Interphase Formation on Lithium Using MD/DFT-Parameterized Kinetic Monte Carlo Simulations

Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries

Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte

Electrolyte-dependent formation of solid electrolyte interphase and ion intercalation revealed by in situ surface characterizations

Self-Assembly Monolayer Inspired Stable Artificial Solid Electrolyte Interphase Design for Next-Generation Lithium Metal Batteries

Molecular Understanding of Li Metal Anode

A Large-Deformation Phase-Field Model for Characterizing Electro-Chemo-Mechanical Failure Mechanisms at Li/Solid Electrolyte Interface

Correlating Solid Electrolyte Interphase Composition with Dendrite‐Free and Long Life‐Span Lithium Metal Batteries via Advanced Characterizations and Simulations

Unraveling the Dynamics of Solid-Electrolyte Interphase (SEI) Formation on Lithium Metal: Insights from Multiscale Modeling