Mo 2 C Electrocatalysts for Kinetically Boosting Polysulfide Conversion in Quasi-Solid-State Lithium–Sulfur Batteries
Yu-Jiao Zhang,Zhen-Yu Xing,Wen-Peng Wang,Ning Gao,Jie Zhao,Wen-Ce Yue,Xue Li,Yi-Bo Gao,Sen Xin,Bao Li,Bao Wang
DOI: https://doi.org/10.1021/acsami.1c14629
2021-09-17
Abstract:Lithium–sulfur batteries (LSBs) suffer from sluggish reaction kinetics of sulfur-containing species and loss of soluble polysulfides (PSs) during cycling, especially in the case of liquid electrolytes. Here, we improve the kinetics of sulfur species by decorating Mo2C nanoparticles on carbon nanotubes (CNTs) as the host for sulfur active mass. In addition, by use of gel polymer electrolytes (GPEs) derived from in situ polymerization of 1,3-dioxolane (DOL) to mitigate the diffusion of PSs and improve the stability of Li stripping/plating. As a result, the sulfur cathodes are endowed with enhanced initial specific capacity and suppressed dissolution of sulfur species. The cells with CNT/Mo2C/S cathodes and GPE exhibit excellent electrochemical performance. The anodes cycled with GPE show remarkably enhanced lithium plating-stripping behavior. Benefitting from the synergistic effect, LSBs with higher energy density and improved durability are obtained, demonstrating a new approach for developing high-performance quasi-solid-state Li metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14629.DFT computational method; TEM images of CM-0, CM-10, CM-20, and CM-40; TEM and elemental mapping images of CM-20; TGA curves of CM-0, CM-10, CM-20, and CM-40; pore size distribution curves of CM-20; survey scans spectra of CM-0 and CM-20; Raman spectra and FTIR spectra of CM-0, CM-10, CM-20, and CM-40; schematic diagram of the polymer polymerized by DOL; FTIR spectra of DOL before and after polymerization; SEM images of the PP separator and PP separator with GPE of the cycled cell; initial model of CNTs and Mo2C; electrochemical impedance plot of the cells with CM-0/S and CM-20/S; Mo 3d XPS spectra of the cycled CM-20/S cathode; permeation behavior of Li2S6 in GPE after 0 and 48 h; and cyclic performance of cell with CM-20/S at 1.0C (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology