Abstract:Aqueous rechargeable zinc-ion batteries (AZIBs) are currently gaining traction as a potential successor to lithium-ion batteries for use in large-scale, stationary energy storage applications due to their inherent safety, low environmental impact, and low-cost. Recent advances have made breakthroughs in these anode and electrolyte stability; however, cathode development still lags preventing the commercial use of AZIBs. Vanadium pentoxide (V2O5) shows promise as a cathode material due to its low cost, environmental friendliness, and high specific capacity versus zinc (in excess of 400 mAh/g) 1 . V 2 O 5 exhibits a single layer crystal structure which provides a large number of theoretical storage sites 2 . However, charge storage mechanisms and driving force behind the capacity fade in V2O5 are not well known yet. The lack of understanding surrounding insertion and storage mechanisms of zinc ions into V 2 O 5 cathodes must be addressed to progress toward commercial viability. In this study, we aim to conduct in-operando stress and stress measurements in V2O5 during battery cycling. Curvature interferometry and digital image correlation techniques will be employed for in operando stress and strain measurements, respectively the composite V 2 O 5 cathode will consist of a 7:2:1 ratio of active material, super P, and PVDF binder. By combining stress and strain measurements, coupled with spectroscopy studies, our goal is to identify the how interfacial stress and structural strains play a role on the charge storage mechanisms in V2O5. References: Xu, X. et al. Enhanced charge transfer and reaction kinetics of vanadium pentoxide for zinc storage via nitrogen interstitial doping. CEJ, vol. 451, p. 3, (2023). DOI: 10.1016/j.cej.2022.138770 Tang, B. et al. Issues and opportunities facing aqueous zinc-ion batteries. Energy Environ. Sci., Issue 11, pp. 3288-3304 (2019). DOI: 10.1039/C9EE02526J

Effect of heat treatment on the electrochemical performance of V2O5·nH2O as a cathode material for aqueous rechargeable zinc ion batteries

Activation and Degradation Mechanisms of Α-V2o5 Cathode Materials in Zn-ion Battery

Al-doped hydrated V6O13 cathode materials with enhanced rate and cycling properties for aqueous zinc-ion batteries

In Situ Mechanical Measurements in Vanadium Pentoxide Cathodes for Aqueous Zinc-Ion Batteries during Battery Cycling

Molten Salt Thermal Treatment Synthesis of S-Doped V 2 CT x and Its Performance as a Cathode in Aqueous Zn-Ion Batteries

Preparation and Performance of Highly Stable Cathode Material Ag2V4O11 for Aqueous Zinc-Ion Battery

Atomic Layer-Deposited ZnO Layer on Hydrated Vanadium Dioxide Cathodes against Vanadium Dissolution for Stable Zinc Ion Batteries

Improvement of NH4V4O10 Cathode Performance in Zinc Ion Batteries by Regulating the Electrolyte

One‐Step Hydrothermal Synthesis of NVO Cathodes with Varied Lattice NH4+ Content: Effect on Structural Evolution and Electrochemical Performance

Dual Effects of Metal and Organic Ions Co‐Intercalation Boosting the Kinetics and Stability of Hydrated Vanadate Cathodes for Aqueous Zinc‐Ion Batteries

Inorganic salt-assisted hydrothermal synthesis of composite vanadium oxides for stabilization of aqueous zinc ion batteries with low current density cycling

Mechanism of Storage and Capacity Attenuation of V<sub>2</sub>O<sub>5</sub> as Cathode of Zinc-ion Battery

A strategy to control crystal water content in hydrated vanadium oxide cathode for promoting aqueous rechargeable zinc-ion batteries

Low-Cost and Large-Scale Preparation of H 2 O and Mg 2+ Co-Preintercalated Vanadium Oxide with High-Performance Aqueous Zn-Ion Batteries

Anion and Cation Co-Modified Vanadium Oxide for Cathode Material of Aqueous Zinc-Ion Battery

Bi-intercalated Vanadium Pentoxide Synthesized Via Hydrogen Peroxide-Induced Phase Transition for Highly Stable Cathode in Aqueous Zinc Ion Batteries

A sustainable route from spent hydrogenation catalysts to lamellar spherical vanadium oxide hydrates for superior low-cost aqueous Zn-ion batteries

Efficient Preparation of Metal-Ion Intercalated Vanadium-Based Cathodes for High-Performance Aqueous Zinc-Ion Batteries: Na2V6O16·3H2O as an Example

Boosting the zinc ion storage capacity and cycling stability of interlayer-expanded vanadium disulfide through in-situ electrochemical oxidation strategy

Bi-intercalated vanadium pentoxide synthesized by hydrogen peroxide-induced phase transition for highly stable cathode of aqueous zinc ion batteries

Zn2+ storage performance and structural change of orthorhombic V2O5 nanowires as the cathode material for rechargeable aqueous zinc-ion batteries