Abstract:<p>Solar heating systems are promising, reliable solutions for meeting heating demands, and reducing greenhouse gas emissions. Due to the temporal fluctuations of solar energy and the mismatch between solar energy availability and heating loads, the application of seasonal thermal storage for solar space heating has drawn much attention. Due to the significant reduction of the collection efficiency of flat plate collectors in the temperature range of 70‐95°C, the expansion of the application of concentrated solar thermal (CST) systems has aroused a strong interest. This study describes a demonstration project with a CST receiver designed for a solar heating system with seasonal storage. This work is to reveal the performance of the receiver in the middle and low‐temperature operation through experimental‐numerical approach using a one‐dimensional transient model with a non‐uniform flux distribution. The simulation results agreed well with experimental data for various operating conditions. The receiver had a collection efficiency of about 82% on a typical day. Meanwhile, the heat losses were mainly reflection losses followed by convection (about 5.6%) and radiation (about 2.1%). Additionally, the model was also used to investigate the effect of various operating parameters such as the inlet temperature, outlet temperature, and incident power on the collection efficiency and heat losses. Ultimately, the developed model and on‐site operating data are valuable for broadening the applications of CST receivers and further system simulation and optimization.</p>

What problem does this paper attempt to address?

The paper primarily explores the numerical and experimental study of centralized solar thermal receivers in solar heating systems with seasonal storage. The aim of the research is to improve the efficiency and reliability of solar heating systems and reduce greenhouse gas emissions. Specifically, the research addresses the following issues: 1. **Solving the mismatch between solar energy and heat demand in solar heating systems**: Due to the temporal variability of solar energy and the mismatch between solar supply and heat demand, seasonal thermal storage technology is introduced to balance this mismatch. 2. **Expanding the application range of Concentrated Solar Thermal (CST) systems**: The efficiency of traditional flat-plate collectors significantly decreases in the higher temperature range (70-95°C). Therefore, the study focuses on centralized solar thermal receivers to expand their application in the medium and low-temperature range. 3. **Evaluating the performance of a new CST receiver**: The performance of a CST receiver designed specifically for solar heating systems with seasonal storage is studied through experimental and numerical simulation methods. The research focuses on the receiver's performance under medium and low-temperature operating conditions. 4. **Analyzing the impact of different operating parameters on receiver performance**: The study examines the effects of operating parameters such as inlet temperature, outlet temperature, and incident power on collection efficiency and thermal losses. 5. **Validating the model's effectiveness**: A one-dimensional transient model was developed to predict the dynamic performance of the receiver and was validated with experimental data. The results show that the model can accurately estimate the transient performance of the receiver under different operating conditions. In summary, this paper aims to evaluate the performance of a new CST receiver in solar heating systems with seasonal storage through experimental and numerical simulation methods, providing valuable reference information for the further application and optimization of CST receivers.

Numerical and experimental study of a concentrated solar thermal receiver for a solar heating system with seasonal storage

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Experimental investigation on heat-transfer characteristics of a cylindrical cavity receiver with pressurized air in helical pipe

An Optimized Model and Test of the China'S First High Temperature Parabolic Trough Solar Receiver

Study of dynamic performance of radiation collector and thermocline system under time-varying radiation environment

Modeling and dynamic simulation of receiver in a solar tower power station

Numerical modeling and parametric analysis of thermal performance for the large-scale seasonal thermal energy storage

Numerical Investigation of a Solar-Heating System with Solar-Tower Receiver and Seasonal Storage in Northern China: Dynamic Performance Assessment and Operation Strategy Analysis

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

Study on the Performance of a Solar Heating System with Seasonal and Cascade Thermal-Energy Storage

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

An Experimental Investigation of a Natural Circulation Heat Pipe System Applied to a Parabolic Trough Solar Collector Steam Generation System

Numerical Study on Thermal Performance of a Solar Cavity Receiver with Different Depths

Experimental and Numerical Evaluation of a Lab-Scale External Solar Receiver

Numerical Simulation and Experimental Study of the Tube Receiver's Performance of Solar Thermal Power Tower

Experiment and Dynamic Simulation of a Solar Tower Collector System for Power Generation

Experimental Study on a Coiled Tube Solar Receiver under Variable Solar Radiation Condition

Experimental and Numerical Study on the Preheating Process of a Lab-Scale Solar Molten Salt Receiver

Numerical investigation of start-up performance of a solar cavity receiver

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection