Abstract:Iron-based Fischer-Tropsch synthesis provides a promising alternative as a direct and non-petroleum route for producing olefins from syngas (CO + H-2). In general, a promoter is required to regulate the activity and olefin selectivity, and the major challenges come from catalyst deactivation due to carbon deposition and sintering under drastic reaction conditions (340 degrees C, high pressure). In this study, we show a totally different strategy for solving these problems. We find that the originally large spherical Fe2O3 particles of around 120 nm assisted by graphene without an additional promoter can gradually evolve during the FTS reaction, forming much smaller cylindrical Hagg carbide nanocapsules of about 10 nm with a single (510) crystal facet, that display excellent activity nearly 40 times that of the unmodified one, olefin selectivity of 76% (84% if methane is not considered) and high stability. In contrast, the original Fe2O3 catalyst and carbon-containing polymer material (e.g. PAA, PVP)-modified Fe2O3 catalysts exhibit significantly lower selectivity for olefins and higher selectivity for methane and deactivate rapidly. Different from the above-mentioned peculiar evolution of iron particles, the iron particles over these spent catalysts aggregate into larger ones having multiple crystal facets, e.g. chi-Fe5C2 (510), and chi-Fe5C2 (-202), and at the same time serious carbon deposition is observed, which mainly accounts for catalyst deactivation. In the case of activated carbon and carbon nanofiber supported iron catalysts with initially small iron particles below 10 nm, irregular morphology and multiple crystal facets of iron carbides are also observed over the spent catalysts. DFT calculations demonstrate that the chi-Fe5C2 (510) crystal facet is more active and favorable for the formation of olefins than the chi-Fe5C2 (-202) crystal facet, which is well in accordance with our experimental results. The presented methodology provides a new strategy to control the morphology and crystal facet of iron carbide during the catalytic reaction for solving the toughest problems in heterogeneous catalysis.

Single-Phase θ-Fe3C Derived from Prussian Blue and Its Catalytic Application in Fischer-Tropsch Synthesis

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

θ-Fe3C dominated Fe@C core–shell catalysts for Fischer-Tropsch synthesis: Roles of θ-Fe3C and carbon shell

Supported Fe2C catalysts originated from Fe2N phase and active for Fischer-Tropsch synthesis

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Controlled Formation of Iron Carbides and Their Performance in Fischer-Tropsch Synthesis

Two-dimensional graphene-directed formation of cylindrical iron carbide nanocapsules for Fischer–Tropsch synthesis

FeCx@C catalysts prepared from Prussian blue and their applications in Fischer-Tropsch synthesis

Atomically Defined Iron Carbide Surface for Fischer–Tropsch Synthesis Catalysis

Synthesis of stable and low-CO 2 selective ε-iron carbide Fischer-Tropsch catalysts.

Relationship Between Iron Carbide Phases (Epsilon-Fe2c, Fe7C3, and Chi-Fe5c2) and Catalytic Performances of Fe/SiO2 Fischer-Tropsch Catalysts

Visualizing Phase Evolution of Co2C for Efficient Fischer‐Tropsch to Olefins

Theoretical Exploration of Intrinsic Facet-Dependent CH4 and C2 Formation on Fe5C2 Particle

Synthesis of Stable and Low-CO2 Selective Phase-Pure Ε-Iron Carbide Catalysts in Synthesis Gas Conversion

Revealing the activity of different iron carbides for Fischer-Tropsch synthesis

Stabilization of ε-iron carbide as high-temperature catalyst under realistic Fischer-Tropsch synthesis conditions

A DFT study towards dynamic structures of iron and iron carbide and their effects on the activity of the Fischer–Tropsch process

Preparation of Iron Carbides Formed by Iron Oxalate Carburization for Fischer–Tropsch Synthesis

Ε-Iron Carbide As a Low-Temperature Fischer–Tropsch Synthesis Catalyst

Facet sensitivity of iron carbides in Fischer-Tropsch synthesis

In Situ Active Site for Fe-Catalyzed Fischer-Tropsch Synthesis: Recent Progress and Future Challenges