Abstract:Objective To identify the anatomic advantages of pre-contouring long helical plate of proximal humerus internal locking system (PHILOS) aided by 3D-printing technique in minimally invasive plate oseoynthesis (MIPO) for metadiaphyseal fractures of the proximal humerus.Methods Firstly in a cadaveric study,12 fresh frozen samples of upper extremity were divided into 2 equal groups:6 in a Synbone group and 6 in a 3D-printing group.Long 10-hole PHILOS plates were pre-contoured helically according to Synbone humerus models in the Synbone group but according to 3D-printing humerus models in the 3D-printing group.All these helical plates were fixed onto the cadaveric humerus using MIPO technique respectively.The horizontal distances between the radial nerve and the lateral side of the plate were measured at the point where the radial nerve penetrates the muscular septum,at the 6th hole on the plate and at the distal end of the plate;the distance between the medial side of the distal plate and the upper arm neurovascular bundle was also measured.Finally,the full lengths of all these cadaveric humeri were measured.Secondly,on the basis of the anatomic study,16 patients with metadiaphyseal fracture of the proximal humerus were treated at Department of Orthopedic Surgery,The Sixth People's Hospital of Shanghai from February 2013 to March 2016,using the same MIPO technique and the same long 10-hole PHILOS plates pre-contoured helically on the 3D printing models which were mirrored on the humerus on the healthy side of the patients.They were 4 men and 12 women,aged from 59 to 87 years (mean,71.0 years).By the AO/OTA classification,10 cases were type B and 6 type C.The fracture line involved the proximal humerus in 7 cases.Postoperative complications were followed up.At the final follow-up,the shoulder function was assessed according to the Constant-Murley score and the elbow function according to the Mayo Elbow Performance Score (MEPS).Results By the anatomic measurement,the full length of cadaveric humerus averaged 30.17 ± 1.93 cm in the Synbone group and 29.75 ± 2.17cm in the 3D-printing group,showing no significant difference (P ＞ 0.05).The horizontal distances between the radial nerve and lateral side of the plate at the point where the radial nerve penetrates the muscular septum,at the 6th hole on the plate and at the distal end of the plate in the Synbone and 3D-printing groups were,respectively,11.50 ± 0.92 mm versus 17.87 ± 1.88 mm,6.90 ± 1.78 mm versus 14.83 ± 1.50 mm,and 5.14 ± 1.14 mm versus 8.36 ± 1.27 mm,all showing significant differences between the 2 groups (P ＜ 0.05％).The distance between the medial side of the distal plate and the upper arm neurovascular bundle was 6.25 ± 0.95 mm in the Synbone group and 6.88 ± 1.21 mm in the 3D-printing group,showing an insignificant difference between the 2 groups (P ＞ 0.05).The clinical observation found no iatrogenic nerve injury.The 16 patients were followed up for an average of 25.3 months (range,from 24 to 38 months).All fractures got united uneventfully.At the final follow-up,their Constant-Murley scores averaged 77.6 points and their MEPS 96.5 points.Conclusion The risk of iatrogenic injury to the radial nerve can be lowered when 3D-print technique is applied for helical pre-contouring of long PHILOS plate in the MIPO for metadiaphyseal proximal humeral fractures,leading to satisfactory clinical results.

Safety and effectiveness of the three-dimensional-printed guide plate-assisted rotation axis positioning of a hinged external fixator for the elbow

[Comparative Study Between 3D Guide Plate Assisted and Free-Hand Insertion of Anterior Cervical Transpedicular Screw].

A Pose Control Algorithm for Elbow Models Based on Five-Axis Unsupported 3D Printing

Proximal Third Humeral Shaft Fractures Fixed with Long Helical PHILOS Plates in Elderly Patients: Benefit of Pre-Contouring Plates on a 3D-Printed Model—a Retrospective Study

Biomechanical evaluation of 3D-printed joint-type orthosis for hallux valgus

Biomechanical Evaluation of Chinese Customized Three-Dimensional Printed Titanium Miniplate in the Lefort I Osteotomy: A Finite Element Analysis

Application of Distal Radius–positioned Hinged External Fixator in Complete Open Release for Severe Elbow Stiffness

3D printing assisted MIPO for treatment of complex middle-proximal humeral shaft fractures

Hinged external fixator combined with internal fixation in the treatment of complex elbow fractures

Experimental Study and Preliminary Clinical Application of Mini-invasive Percutaneous Internal Screw Fixation for Scaphoid Fracture under the Guidance of a 3D-Printed Guide Plate

Establishment Of A Three-Dimensional Finite Element Model And Biomechanical Analysis Of Three Different Internal Fixation Methods For Humeral Greater Tuberosity Fracture

Experimental validation of finite element simulation of a new custom-designed fixation plate to treat mandibular angle fracture

Pre-contouring long helical plate of proximal humerus internal locking system aided by 3D-printing technique in minimally invasive plate osteosynthesis for metadiaphyseal fractures of the proximal humerus: a cadaveric study and clinical experience

Application of 3D-Printed Orthopedic Cast for the Treatment of Forearm Fractures: Finite Element Analysis and Comparative Clinical Assessment

Non-control Study Systematic Review of Safety and Effectiveness of Three-Dimensional Printing Technology in Orthopedic

Weak Points of Double-Plate Stabilization Used in the Treatment of Distal Humerus Fracture through Finite Element Analysis

The effectiveness and safety of 3-dimensional printed composite guide plate for atlantoaxial pedicle screw: A retrospective study.

Randomized study for a novel elbow joint fixation device on postoperative complications in patients undergoing percutaneous coronary diagnostic or therapeutic procedures through the brachial artery

Preliminary application of three dimensional printing surgical guide plate in orthognathic surgery for partial mandibular deformities

Personalized Human Factor And Ergonomics: Usability Design Of 3d Printed Patient-Specific Fracture External Fixator

An X-ray-free Method to Accurately Identify the Elbow Flexion–extension Axis for the Placement of a Hinged External Fixator