Abstract:Perovskites with flexible structures and excellent redox properties have attracted considerable attention in industry, and their denitration activities can be further improved with metal substitution. In order to investigate the effect of Ce and Cu substitution on the physicochemical properties of perovskite in NH 3 -SCR system, a series of La 1− x Ce x Mn 1− y Cu y O 3 ( x = 0, 0.1, y = 0, 0.05, 0.1, 0.2, 0.4) catalysts were prepared by citrate sol-gel method and employed for NO removal in the simulated flue gas, and the physical and chemical properties of the catalysts were studied using XRD, SEM, BET, XPS, DRIFT characterizations. The Ce substitution on A-site cation of LaMnO 3 can improve the denitration activity of the perovskite catalyst, and La 0.9 Ce 0.1 MnO 3 displays NO conversion of 86.7% at 350 °C. The characterization results indicate that the high denitration activity of La 0.9 Ce 0.1 MnO 3 is mainly attributed to the larger surface area, which contributes to the adsorption of NH 3 and NO. Besides, the appropriate Cu substitution on B-site cation of La 0.9 Ce 0.1 MnO 3 can further improve the denitration activity of perovskite catalyst, and La 0.9 Ce 0.1 Mn 0.8 Cu 0.2 O 3 displays the NO conversion of 91.8% at 350 °C. Although the specific surface area of La 0.9 Ce 0.1 Mn 0.8 Cu 0.2 O 3 is lower than La 0.9 Ce 0.1 MnO 3 , the Cu active sites and the Ce 3+ contents are more developed, making many reaction units formed on the catalyst surface and redox properties of catalyst improved. In addition, strong metal interaction (Ce 4+ + Mn 2+ + Cu 2+ ↔ Ce 3+ + Mn 3+ /Mn 4+ + Cu + ) and high concentrations of chemical adsorbed oxygen and lattice oxygen both strengthen the redox reaction on catalyst surface, thus contributing to the better denitration activity of La 0.9 Ce 0.1 Mn 0.8 Cu 0.2 O 3 . Therefore, appropriate cerium and copper substitution will markedly improve the denitration activity of La–Mn perovskite catalyst. We also reasonably conclude a multiple reaction mechanism during NH 3 -SCR denitration process basing on DRIFT results, which includes the Eley–Rideal mechanism and Langmuir–Hinshelwood mechanism.

Improvement of purification performance of perovskite exhaust catalysts for underground diesel vehicles by doping with Enteromorpha

Study of Ce, Ca, Fe, and Mn-Doped LaCoO3 Perovskite Oxide for the Four-Way Purification of PM, NOx, CO, and HC from Diesel Engine Exhaust

Enhancing NH 3 -SCR denitrification performance through synergistic A- and B-site effects via CeFe modification of LaMnO 3

Research progress on preparation of cerium-based oxide catalysts with specific morphology and their application for purification of diesel engine exhaust

Enhancement of NO Oxidation Activity and SO2 Resistance over LaMnO3+δ Perovskites Catalysts with Metal Substitution and Acid Treatment

Satisfactory Anti-Interference and High Performance of the 1Co-1Ce/Mn@ZSM-5 Catalyst for Simultaneous Removal of NO and Hg0 in Abominable Flue Gas.

Cerium Doping Effect in 3DOM Perovskite-Type La2−xCexCoNiO6 Catalysts for Boosting Soot Oxidation

Integrating Pd-doped perovskite catalysts with ceramic hollow fibre substrate for efficient CO oxidation

Tuning the catalytic properties of La–Mn perovskite catalyst via variation of A- and B-sites: effect of Ce and Cu substitution on selective catalytic reduction of NO with NH3

Preparation, Structure and Soot Oxidation Performance of Nano-scaled Perovskite-type La1-xKxCoO3 Catalyst

Satisfactory Anti-Interference and High Performance of the 1Co–1Ce/Mn@ZSM-5 Catalyst for Simultaneous Removal of NO and Hg 0 in Abominable Flue Gas

Efficient Catalysts of K and Ce Co-Doped LaMnO3 for NOx–Soot Simultaneous Removal and Reaction Kinetics

Efficient Catalysts of K and Ce Co-Doped LaMnO 3 for NO x –Soot Simultaneous Removal and Reaction Kinetics

Research progress on the preparation of alkali/alkaline earth metal-modified metal oxide catalysts and their application to diesel engine exhaust soot particle catalytic purification

Surface tuning of 3DOM LaFe0.6Mg0.4O3 perovskite by acid etching to enhance catalytic performance for soot combustion

Surface tuning of noble metal doped perovskite oxide by synergistic effect of thermal treatment and acid etching: A new path to high-performance catalysts for methane combustion

Advances in Designing Efficient La-Based Perovskites for the NOx Storage and Reduction Process

Fine‐Tuning Surface Properties of Perovskites Via Nanocompositing with Inert Oxide Toward Developing Superior Catalysts for Advanced Oxidation

A Highly Efficient and Porous Catalyst for Simultaneous Removal of NOx and Diesel Soot

Communication—Perovskite Electrochemical System for Highly Selective NOxReduction of Diesel Engine Exhaust

A systematic evaluation of the catalytic behavior of transition metal (Fe and Mn)–doped ceria-zirconia-alumina oxides on automobile exhaust