Molybdenum Disulfide/Double‐Wall Carbon Nanotube Mixed‐Dimensional Heterostructures

Xueyin Bai,Zhenyu Xu,Qiang Zhang,Shisheng Li,Yunyun Dai,Xiaoqi Cui,Hoon Hahn Yoon,Lide Yao,Hua Jiang,Mingde Du,Yi Zhang,Esko I. Kauppinen,Zhipei Sun

DOI: https://doi.org/10.1002/admi.202200193

IF: 5.4

2022-03-18

Advanced Materials Interfaces

Abstract:Advanced Materials Interfaces, EarlyView.

materials science, multidisciplinary,chemistry

What problem does this paper attempt to address?

Two‐Dimensional Layered Heterostructures Synthesized from Core–Shell Nanowires

qi zhang,xu xiao,ruiqi zhao,danhui lv,guanchen xu,zhixing lu,lifei sun,shizhe lin,xiang gao,jun zhou,chuanhong jin,feng ding,l jiao

DOI: https://doi.org/10.1002/anie.201502461

2015-01-01

Angewandte Chemie

Abstract:Controlled stacking of different two-dimensional (2D) atomic layers will greatly expand the family of 2D materials and broaden their applications. A novel approach for synthesizing MoS2/WS2 heterostructures by chemical vapor deposition has been developed. The successful synthesis of pristine MoS2/WS2 heterostructures is attributed to using core-shell WO3-x/MoO3-x nanowires as a precursor, which naturally ensures the sequential growth of MoS2 and WS2. The obtained heterostructures exhibited high crystallinity, strong interlayer interaction, and high mobility, suggesting their promising applications in nanoelectronics. The stacking orientations of the two layers were also explored from both experimental and theoretical aspects. It is elucidated that the rational design of precursors can accurately control the growth of high-quality 2D heterostructures. Moreover, this simple approach opens up a new way for creating various novel 2D heterostructures by using a large variety of heteronanomaterials as precursors.
One-Step Synthesis of Metal/Semiconductor Heterostructure NbS2/MoS2

Qundong Fu,Xiaowei Wang,Jiadong Zhou,Juan Xia,Qingsheng Zeng,Danhui Lv,Chao Zhu,Xiaolei Wang,Yue Shen,Xiaomin Li,Younan Hua,Fucai Liu,Zexiang Shen,Chuanhong Jin,Zheng Liu

DOI: https://doi.org/10.1021/acs.chemmater.7b05117

IF: 10.508

2018-01-01

Chemistry of Materials

Abstract:Chemical vapor deposition (CVD) has proven its surpassing advantages, such as larger scale, interlayer orientation control, and clean interface, in the synthesis of transitional metal dichalcogenide (TMDC) semiconductor/semiconductor van der Waals (vdW) heterostructures. However, it is suffering problems of high melting points and low chemical reactivity of metal oxide feedstocks in the preparation of high-quality metal/semiconductor (M/S) TMDC vdW heterostructures. Here, for the first time, we report the synthesis of the M/S TMDC vdW heterostructure NbS2/MoS2 via a one-step halide-assisted CVD method, which effectively overcomes the drawbacks of metal oxide precursors. This one-step method provides the high quality and clean interface of the NbS2/MoS2 heterostructure, which has been proved by the transmission electron microscopy characterization. A mechanism that MoS2 finishes the growth first and subsequently serves as a superior substrate for the growth of NbS2 is proposed. This novel method will open up new opportunities in the syntheses of other M/S TMDC vdW heterostructures and will facilitate the research of the TMDC M/S interface.
A van der Waals pn heterojunction with organic/inorganic semiconductors

Daowei He,Yiming Pan,Haiyan Nan,Shuai Gu,Ziyi Yang,Bing Wu,Xiaoguang Luo,Bingchen Xu,Yuhan Zhang,Yun Li,Zhenhua Ni,Baigeng Wang,Jia Zhu,Yang Chai,Yi Shi,Xinran Wang

DOI: https://doi.org/10.48550/arXiv.1511.02361

2015-11-07

Abstract:van der Waals (vdW) heterojunctions formed by two-dimensional (2D) materials have attracted tremendous attention due to their excellent electrical/optical properties and device applications. However, current 2D heterojunctions are largely limited to atomic crystals, and hybrid organic/inorganic structures are rarely explored. Here, we fabricate hybrid 2D heterostructures with p-type dioctylbenzothienobenzothiophene (C8-BTBT) and n-type MoS2. We find that few-layer C8-BTBT molecular crystals can be grown on monolayer MoS2 by vdW epitaxy, with pristine interface and controllable thickness down to monolayer. The operation of the C8-BTBT/MoS2 vertical heterojunction devices is highly tunable by bias and gate voltages between three different regimes: interfacial recombination, tunneling and blocking. The pn junction shows diode-like behavior with rectifying ratio up to 105 at the room temperature. Our devices also exhibit photovoltaic responses with power conversion efficiency of 0.31% and photoresponsivity of 22mA/W. With wide material combinations, such hybrid 2D structures will offer possibilities for opto-electronic devices that are not possible from individual constituents.

Mesoscale and Nanoscale Physics,Materials Science
Synthesis and characterization of multiwalled carbon nanotube/CdS core/shell heterostructures

Hongyu Sun,Yan Chen,Xiaohong Li,Wei Li,Yanwu Xie,Baoting Liu,Xiangyi Zhang

DOI: https://doi.org/10.1016/j.ssc.2010.02.015

IF: 1.934

2010-01-01

Solid State Communications

Abstract:Multiwalled carbon nanotube (MWCNT)/CdS core/shell heterostructures have been successfully synthesized via a simple solution-phase method. The thickness of CdS shells can be facilely tuned by either the reaction temperature or time. The CdS nanoparticles are first formed directly on the surface of MWCNT, and then a uniform CdS sheath is yielded via orientated aggregation processes. The present work provides a simple route to obtain MWCNT-based core/shell heterostructures and thus is of wide interest for the studies of nanomaterials and nanodevices.
Fabrication of multimetal bisulfide nanotube and its structural characteristics

Guohua Li,Yuewu Zeng,Xuchun Song,Junbao Xia,Weixiang Chen,Zhude Xu

2004-01-01

Abstract:The fabrication and structure controlling of inorganic fullerene-like nanocompounds have attracted wide interests in recent years. A new approach of exfoliating-restacking-structure controlling was applied to overcome some technological problems in present preparation approaches. MoS2 and WS2 powders were used as precursor materials and exfoliated into single layers by butyllithium. The sample was treated by MnCl2 solution at 80°C to introduce Mn2+ cations into the reactive system. In this way, the single layer was restacked and the structure of product could be controlled. The products were characterized by XRD, TEM and HRTEM respectively. XRD results indicate that multimetal disulfide compounds can be fabricated by this new approach. TEM results show that the morphology of the multimetal disulfide compounds exhibits hollow-like nanotubes. HRTEM results show that the structure of the hollow-like nanotubes is of double layers. And the substructure of the inner layer exhibits multi-wall shape. Based on the above results, a possible formation mechanism of hollow multi-wall nanotubes was discussed.
Strong-coupled Hybrid Structure of Carbon Nanotube and MoS2 Monolayer with Ultrafast Interfacial Charge Transfer.

Can Liu,Hao Hong,Qinghe Wang,Ping Liu,Yonggang Zuo,Jing Liang,Yang Cheng,Xu Zhou,Jinhuan Wang,Yun Zhao,Jie Xiong,Bin Xiang,Jin Zhang,Kaihui Liu

DOI: https://doi.org/10.1039/c9nr04791c

IF: 6.7

2019-01-01

Nanoscale

Abstract:Hybrid structures assembled by van der Waals (vdW) interactions greatly expand the conventional material platforms, as there is no constraint of lattice matching in the materials design. However, a general challenge lies in the controllable assembly of 1D-2D hybrids with strong-coupled interfaces, because the interaction area is very small and is easily disturbed by exotic molecules. Here, we report the direct construction of 1D carbon nanotube-2D MoS2 monolayer hybrids with strong interfacial coupling using a sequential chemical vapour deposition growth method. The strong mechanical and electronic couplings between the nanotubes and MoS2 are unambiguously illustrated from the Raman-mode frequency shift and ultrafast interfacial charge transfer (∼100 fs). The findings in this work will boost the mass fabrication of 1D-2D vdW hybrid materials with controllable interfacial geometry and coupling strength, and pave the way for their future applications in electronics, optoelectronics and photovoltaics.
Molybdenum Disulfide Sheathed Carbon Nanotubes

Xuchun Song,Zhude Xu,Yifan Zheng,Gui Han,Bo Liu,Weixiang Chen

IF: 9.1

2004-01-01

Chinese Chemical Letters

Abstract:Single and double layered MoS2-coated multiwalled carbon nanotubes (MWCNs) were successfully prepared by pyrolyzing (NH4)(2)MoS4-Coated multiwalled carbon nanotubes in an H-2 atmosphere at 900degreesC. MoS2-coated MWCNs would be expected to have different tribological and mechanical properties compared to MoS2, so it may have potential applications in many fields.
Metallic and Highly Conducting Two-Dimensional Atomic Arrays of Sulfur Enabled by Molybdenum Disulfide Nanotemplate

Shuze Zhu,Xiumei Geng,Yang Han,Mourad Benamara,Liao Chen,Jingxiao Li,Ismail Bilgin,Hongli Zhu

DOI: https://doi.org/10.1038/s41524-017-0041-z

IF: 12.256

2017-01-01

npj Computational Materials

Abstract:Element sulfur in nature is an insulating solid. While it has been tested that one-dimensional sulfur chain is metallic and conducting, the investigation on two-dimensional sulfur remains elusive. We report that molybdenum disulfide layers are able to serve as the nanotemplate to facilitate the formation of two-dimensional sulfur. Density functional theory calculations suggest that confined in-between layers of molybdenum disulfide, sulfur atoms are able to form two-dimensional triangular arrays that are highly metallic. As a result, these arrays contribute to the high conductivity and metallic phase of the hybrid structures of molybdenum disulfide layers and two-dimensional sulfur arrays. The experimentally measured conductivity of such hybrid structures reaches up to 223 S/m. Multiple experimental results, including X-ray photoelectron spectroscopy (XPS), transition electron microscope (TEM), selected area electron diffraction (SAED), agree with the computational insights. Due to the excellent conductivity, the current density is linearly proportional to the scan rate until 30,000 mV s −1 without the attendance of conductive additives. Using such hybrid structures as electrode, the two-electrode supercapacitor cells yield a power density of 10 6 Wh kg −1 and energy density ~47.5 Wh kg −1 in ionic liquid electrolytes. Our findings offer new insights into using two-dimensional materials and their Van der Waals heterostructures as nanotemplates to pattern foreign atoms for unprecedented material properties.
Heterostructures of Single-Walled Carbon Nanotubes and Carbide Nanorods

Y Zhang,T Ichihashi,E Landree,F Nihey,S Iijima

DOI: https://doi.org/10.1126/science.285.5434.1719

IF: 56.9

1999-01-01

Science

Abstract:A method based on a controlled solid-solid reaction was used to fabricate heterostructures between single-walled carbon nanotubes (SWCNTs) and nanorods or particles of silicon carbide and transition metal carbides. Characterization by high-resolution transmission electron microscopy and electron diffraction indicates that the heterostructures have well-defined crystalline interfaces. The SWCNT/carbide interface, with a nanometer-scale area defined by the cross section of a SWCNT bundle or of a single nanotube, represents the smallest heterojunction that can be achieved using carbon nanotubes, and it can be expected to play an important role in the future fabrication of hybrid nanodevices.
Tuning optical properties of monolayer MoS2 through the 0D/2D interfacial effect with C60 nanoparticles

Bowen Liu,Zhe Zhang,Kan Liao,Rong Wu,Chao Zhu,Hongguang Xie,Chenyang Zha,Yao Yin,Xiaohong Jiang,Sichen Qin,Wei Wang,Gang Ouyang,Tianshi Qin,Lin Wang,Wei Huang

DOI: https://doi.org/10.1016/j.apsusc.2020.146371

IF: 6.7

2020-09-01

Applied Surface Science

Abstract:The success of 2D materials reveals that material properties are highly dependent on their dimensionality. In heterostructure engineering, therefore, the dimensionality of interface also affects the coupling and process there. Here, we construct a fresh 0D/2D interface, demonstrating that their optical properties could be tuned due to the rich surface chemistry of nanoparticles. As a preliminary example, C60 nanoparticles are introduced onto monolayer MoS2 films through spin coating featured by simple operation, uniform coverage, wafer-scale fabrication and printing capability. A combined study of morphology characterization, optical measurement and band calculations has been performed on these heterostructures. The blue-shift of MoS2 photoluminescence peak is attributed to the efficient electron transfer from MoS2 to C60. Moreover, the emission behavior of C60/MoS2 heterostructures can evolve over time, which may relate to a non-equilibrium process governed by the kinetics and thermodynamic behavior of C60 nanoparticles upon the continued illumination of laser, with some potential in future dynamic imaging and thermal/light sensing systems. We are optimistic that, by further polishing the fabrication of 0D/2D heterostructures, their interaction effect could be in an artificial-atomic designing towards the flexible optical engineering with mixed 2D and 0D quantum confinements.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Carbon-Nanotube-Confined Vertical Heterostructures with Asymmetric Contacts

Jin Zhang,Kenan Zhang,Bingyu Xia,Yang Wei,Dongqi Li,Ke Zhang,Zhixing Zhang,Yang Wu,Peng Liu,Xidong Duan,Yong Xu,Wenhui Duan,Shoushan Fan,Kaili Jiang

DOI: https://doi.org/10.1002/adma.201702942

IF: 29.4

2017-01-01

Advanced Materials

Abstract:Van der Waals (vdW) heterostructures have received intense attention for their efficient stacking methodology with 2D nanomaterials in vertical dimension. However, it is still a challenge to scale down the lateral size of vdW heterostructures to the nanometer and make proper contacts to achieve optimized performances. Here, a carbon-nanotube-confined vertical heterostructure (CCVH) is employed to address this challenge, in which 2D semiconductors are asymmetrically sandwiched by an individual metallic single-walled carbon nanotube (SWCNT) and a metal electrode. By using WSe2 and MoS2, the CCVH can be made into p-type and n-type field effect transistors with high on/off ratios even when the channel length is 3.3 nm. A complementary inverter was further built with them, indicating their potential in logic circuits with a high integration level. Furthermore, the Fermi level of SWCNTs can be efficiently modulated by the gate voltage, making it competent for both electron and hole injection in the CCVHs. This unique property is shown by the transition of WSe2 CCVH from unipolar to bipolar, and the transition of WSe2/MoS2 from p-n junction to n-n junction under proper source-drain biases and gate voltages. Therefore, the CCVH, as a member of 1D/2D mixed heterostructures, shows great potentials in future nanoelectronics and nano-optoelectronics.
Structure and Electrical Properties of Ni Nanowire/Multiwalled‐Carbon Nanotube/Amorphous Carbon Nanotube Heterojunctions

Jun Luo,Yingjie Xing,Jing Zhu,Dapeng Yu,Yonggang Zhao,Lu Zhang,Hui Fang,Zhipeng Huang,Jun Xu

DOI: https://doi.org/10.1002/adfm.200500755

IF: 19

2006-01-01

Advanced Functional Materials

Abstract:A one-dimensional heterojunction is fabricated and characterized. This heterojunction comprises a Ni nanowire, a multiwalled carbon nanotube (MWCNT), and an amorphous carbon nanotube (a-CNT). The three components are in an end-to-end configuration, and form two MWCNT contacts, namely a Ni/MWCNT and an MWCNT/a-CNT contact. The interfacial structures of the two contacts show that multiple outer walls in the MWCNT simultaneously contact the Ni nanowire and the a-CNT, and can simultaneously participate in electrical transport. By investigating the electrical-transport properties of the heterojunctions, the two contacts to the MWCNT in every heterojunction are found to behave as two diodes connected in series face-to-face, at least one of which exhibits the characteristics of a nearly ideal Schottky diode and obeys thermionic-emission theory, wherein only the image force lowers the Schottky barrier. The appearance of this type of nearly ideal diode is attributed to the good contacts to the multiple outer walls of the MWCNTs realized by the heterojunctions' structures.
Strongly Coupled High-Quality Graphene/2D Superconducting Mo2C Vertical Heterostructures with Aligned Orientation.

Chuan Xu,Shuang Song,Zhibo Liu,Long Chen,Yunlong Wang,Dingxun Fan,Ning Kang,Xiang Ma,Hui‐Ming Cheng,Wencai Ren

DOI: https://doi.org/10.1021/acsnano.7b01638

IF: 17.1

2017-01-01

ACS Nano

Abstract:Vertical heterostructures of two-dimensional (2D) crystals have led to the observations of numerous exciting physical phenomena and presented the possibilities for technological applications, which strongly depend on the quality, interface, relative alignment, and interaction of the neighboring 2D crystals. The heterostructures or hybrids of graphene and superconductors offer a very interesting platform to study mesoscopic superconductivity and the interplay of the quantum Hall effect with superconductivity. However, so far the heterostructures of graphene and 2D superconductors are fabricated by stacking, and consequently suffer from random relative alignment, weak interfacial interaction, and unavoidable interface contaminants. Here we report the direct growth of high-quality graphene/2D superconductor (nonlayered ultrathin α-Mo2C crystal) vertical heterostructures with uniformly well-aligned lattice orientation and strong interface coupling by chemical vapor deposition. In the heterostructure, both graphene and 2D α-Mo2C crystal show no defect, and the graphene is strongly compressed. Different from the previously reported graphene/superconductor heterostructures or hybrids, the strong interface coupling leads to a phase diagram of superconducting transition with multiple voltage steps being observed in the transition regime. Furthermore, we demonstrate the realization of highly transparent Josephson junction devices based on these strongly coupled high-quality heterostructures, in which a clear magnetic-field-induced Fraunhofer pattern of the critical supercurrent is observed.
Vertical Heterostructures: Direct Synthesis and Enhanced Rectification of Alloy‐to‐Alloy 2D Type‐II MoS 2(1‐ x ) Se 2 x /SnS 2(1‐ y ) Se 2 y Heterostructures (Adv. Mater. 8/2021)

Xiaoting Wang,Longfei Pan,Juehan Yang,Bo Li,Yue‐Yang Liu,Zhongming Wei

DOI: https://doi.org/10.1002/adma.202170059

IF: 29.4

2021-02-01

Advanced Materials

Abstract:In article number 2006908, Zhongming Wei and co‐workers show how the nearly intrinsic van der Waals interface of MoS2(1−x)Se2x/SnS2(1−y)Se2y enables the identification of the intrinsic behaviors of heterostructures, such as type‐II band alignment with large band offset, effective charge transfer, and enhanced transport properties.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Strongly Coupled High-Quality Graphene/2D Superconducting Mo2C Vertical Heterostructures with Aligned Orientation

Chuan Xu,Shuang Song,Zhibo Liu,Long Chen,Libin Wang,Dingxun Fan,Ning Kang,Xiuliang Ma,Hui-Ming Cheng,Wencai Ren

DOI: https://doi.org/10.1021/acsnano.7b01638

IF: 17.1

2017-01-01

ACS Nano

Abstract:Vertical heterostructures of two-dimensional (2D) crystals have led to the observations of numerous exciting physical phenomena and presented the possibilities for technological applications, which strongly depend on the quality, interface, relative alignment, and interaction of hybrids of graphene and superconductors offer a very the neighboring 2D crystals. The heterostructures or interesting platform to study mesoscopic superconductivity and the interplay of the quantum Hall effect with superconductivity. However, so far the heterostructures of graphene and 2D superconductors are fabricated by stacking, and consequently suffer from random relative alignment, weak interfacial interaction, and unavoidable interface contaminants. Here we report the direct growth of high-quality graphene/2D superconductor (nonlayered ultrathin alpha-Mo2C crystal) vertical heterostructures with uniformly well-aligned lattice orientation and strong interface coupling by chemical vapor deposition. In the heterostructure, both graphene and 2D alpha-Mo2C crystal show no defect, and the graphene is strongly compressed. Different from the previously reported graphene/superconductor heterostructures or hybrids, the strong interface coupling leads to a phase diagram of superconducting transition with multiple voltage steps being observed in the transition regime. Furthermore, we demonstrate the realization of highly transparent Josephson junction devices based on these strongly coupled high-quality heterostructures, in which a clear magnetic-field-induced Fraunhofer pattern of the critical supercurrent is observed.
SWCNT‐MoS2‐SWCNT Vertical Point Heterostructures

Jin Zhang,Yang Wei,Fengrui Yao,Dongqi Li,He Ma,Peng Lei,Hehai Fang,Xiaoyang Xiao,Zhixing Lu,Juehan Yang,Jingbo Li,Liying Jiao,Weida Hu,Kaihui Liu,Kai Liu,Peng Liu,Qunqing Li,Wei Lu,Shoushan Fan,Kaili Jiang

DOI: https://doi.org/10.1002/adma.201604469

IF: 29.4

2016-01-01

Advanced Materials

Abstract:A vertical point heterostructure (VPH) is constructed by sandwiching a two-dimensional (2D) MoS2 flake with two cross-stacked metallic single-walled carbon nanotubes. It can be used as a field-effect transistor with high on/off ratio and a light detector with high spatial resolution. Moreover, the hybrid 1D-2D-1D VPHs open up new possibilities for nanoelectronics and nano-optoelectronics.
A Seamless Three-Dimensional Carbon Nanotube Graphene Hybrid Material

Yu Zhu,Lei Li,Chenguang Zhang,Gilberto Casillas,Zhengzong Sun,Zheng Yan,Gedeng Ruan,Zhiwei Peng,Abdul-Rahman O Raji,Carter Kittrell,Robert H Hauge,James M Tour

DOI: https://doi.org/10.1038/ncomms2234

IF: 16.6

2012-01-01

Nature Communications

Abstract:Graphene and single-walled carbon nanotubes are carbon materials that exhibit excellent electrical conductivities and large specific surface areas. Theoretical work suggested that a covalently bonded graphene/single-walled carbon nanotube hybrid material would extend those properties to three dimensions, and be useful in energy storage and nanoelectronic technologies. Here we disclose a method to bond graphene and single-walled carbon nanotubes seamlessly during the growth stage. The hybrid material exhibits a surface area >2,000 m(2) g(-1) with ohmic contact from the vertically aligned single-walled carbon nanotubes to the graphene. Using aberration-corrected scanning transmission electron microscopy, we observed the covalent transformation of sp(2) carbon between the planar graphene and the single-walled carbon nanotubes at the atomic resolution level. These findings provide a new benchmark for understanding the three-dimensional graphene/single-walled carbon nanotube-conjoined materials.
Electronic Structures and Band Alignment Transition in Double-Wall MoS2/WS2 Nanotubes for Optoelectronic Applications

Dan Guo,Kaike Yang,Cai-Xin Zhang,Tao Shen,Hui-Xiong Deng

DOI: https://doi.org/10.1088/1361-6463/abc4a7

2020-01-01

Abstract:Band alignment caused by discontinuous band structures of two different materials plays a central role in semiconductor heterojunctions and interface physics. We investigate the electronic structures and band alignments of double-wall MoS2/WS2 nanotubes with different chirality and geometry. We find that the band gap of both armchair and zigzag nanotubes obeys E-G=E-G(in)-exp-[-delta>Delta R-alpha)], wutg E-G(in) being the band gap of the inner nanotube and Delta R the spacing distance between the inner and outer nanotubes. When placing MoS2 in the inner and WS2 in the outer of the nanotubes, the band alignment belongs to type-I because the conduction band minimum (CBM) of the inner MoS2 nanotube is lower than that of the outer WS2 nanotube, and the valence band maximum (VBM) of MoS2 nanotube is higher than that of WS2 nanotube. While putting the WS2 nanotube in the inner and MoS2 nanotube in the outer, the CBM and VBM of MoS2 nanotube are both lower than the corresponding band extreme points of WS2 nanotube when their diameter is small. Therefore, type-II to type-I band alignment transition occurs, originating from charge transfer with increasing spacing distance. Due to the adjustable band gap and electronic structures, we expect that these double-wall hetero-structured nanotubes will have great potential in optoelectronic devices.
Edge Epitaxy of Two-Dimensional MoSe2 and MoS2 Nanosheets on One-Dimensional Nanowires.

Junze Chen,Xue-Jun Wu,Yue Gong,Yihan Zhu,Zhenzhong Yang,Bing Li,Qipeng Lu,Yifu Yu,Shikui Han,Zhicheng Zhang,Yun Zong,Yu Han,Lin Gu,Hua Zhang

DOI: https://doi.org/10.1021/jacs.7b03752

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Rational design and synthesis of heterostructures based on transition metal dichalcogenides (TMDs) have attracted increasing interests because of their promising applications in electronics, catalysis, etc. However, the construction of epitaxial heterostructures with an interface at the edges of TMD nanosheets (NSs) still remains a great challenge. Here, we report a strategy for controlled synthesis of a new type of heterostructure in which TMD NSs, including MoS2 and MoSe2, vertically grow along the longitudinal direction of one-dimensional (1D) Cu2-xS nanowires (NWs) in an epitaxial manner. The obtained Cu2-xS-TMD heterostructures with tunable loading amount and lateral size of TMD NSs are achieved by the consecutive growth of TMD NSs on Cu2-xS NWs through gradual injection of chalcogen precursors. After cation exchange of Cu in Cu2-xS-TMD heterostructures with Cd, the obtained CdS-MoS2 heterostructures retained their original architectures. Compared to the pure CdS NWs, the CdS-MoS2 heterostructures with 7.7 wt % loading of MoS2 NSs exhibit the best performance in the photocatalytic hydrogen evolution reaction with a H2 production rate up to 4647 μmol·h-1·g-1, about 58 times that catalyzed with pure CdS NWs. Our synthetic strategy opens up a new way for the controlled synthesis of TMD-based heterostructures, which could have various promising applications.
Band engineering of double-wall Mo-based hybrid nanotubes

Lei Tao,Yu-Yang Zhang,Jiatao Sun,Shixuan Du,Hong-Jun Gao

DOI: https://doi.org/10.1088/1674-1056/27/7/076104

2018-07-01

Chinese Physics B

Abstract:Hybrid transition-metal dichalcogenides (TMDs) with different chalcogens on each side (X-TM-Y) have attracted attention because of their unique properties. Nanotubes based on hybrid TMD materials have advantages in flexibility over conventional TMD nanotubes. Here we predict the wide band gap tunability of hybrid TMD double-wall nanotubes (DWNTs) from metal to semiconductor. Using density-function theory (DFT) with HSE06 hybrid functional, we find that the electronic property of X-Mo-Y DWNTs (X = O and S, inside a tube; Y = S and Se, outside a tube) depends both on electronegativity difference and diameter difference. If there is no difference in electron negativity between inner atoms (X) of outer tube and outer atoms (Y) of inner tube, the band gap of DWNTs is the same as that of the inner one. If there is a significant electronegativity difference, the electronic property of the DWNTs ranges from metallic to semiconducting, depending on the diameter differences. Our results provide alternative ways for the band gap engineering of TMD nanotubes.

physics, multidisciplinary

Molybdenum Disulfide/Double‐Wall Carbon Nanotube Mixed‐Dimensional Heterostructures

Two‐Dimensional Layered Heterostructures Synthesized from Core–Shell Nanowires

One-Step Synthesis of Metal/Semiconductor Heterostructure NbS2/MoS2

A van der Waals pn heterojunction with organic/inorganic semiconductors

Synthesis and characterization of multiwalled carbon nanotube/CdS core/shell heterostructures

Fabrication of multimetal bisulfide nanotube and its structural characteristics

Strong-coupled Hybrid Structure of Carbon Nanotube and MoS2 Monolayer with Ultrafast Interfacial Charge Transfer.

Molybdenum Disulfide Sheathed Carbon Nanotubes

Metallic and Highly Conducting Two-Dimensional Atomic Arrays of Sulfur Enabled by Molybdenum Disulfide Nanotemplate

Heterostructures of Single-Walled Carbon Nanotubes and Carbide Nanorods

Tuning optical properties of monolayer MoS2 through the 0D/2D interfacial effect with C60 nanoparticles

Carbon-Nanotube-Confined Vertical Heterostructures with Asymmetric Contacts

Structure and Electrical Properties of Ni Nanowire/Multiwalled‐Carbon Nanotube/Amorphous Carbon Nanotube Heterojunctions

Strongly Coupled High-Quality Graphene/2D Superconducting Mo2C Vertical Heterostructures with Aligned Orientation.

Vertical Heterostructures: Direct Synthesis and Enhanced Rectification of Alloy‐to‐Alloy 2D Type‐II MoS 2(1‐ x ) Se 2 x /SnS 2(1‐ y ) Se 2 y Heterostructures (Adv. Mater. 8/2021)

Strongly Coupled High-Quality Graphene/2D Superconducting Mo2C Vertical Heterostructures with Aligned Orientation

SWCNT‐MoS2‐SWCNT Vertical Point Heterostructures

A Seamless Three-Dimensional Carbon Nanotube Graphene Hybrid Material

Electronic Structures and Band Alignment Transition in Double-Wall MoS2/WS2 Nanotubes for Optoelectronic Applications

Edge Epitaxy of Two-Dimensional MoSe2 and MoS2 Nanosheets on One-Dimensional Nanowires.

Band engineering of double-wall Mo-based hybrid nanotubes