Abstract:The sluggish redox kinetics and the severe shuttle effect of soluble lithium polysulfides (LiPSs) are the main key issues which would hinder the development of lithium-sulfur (Li-S) batteries. In this work, a nickel-doped vanadium selenide in-situ grows on reduced graphene oxide(rGO) to form a two-dimensional (2D) composite Ni-VSe 2 /rGO by a simple solvothermal method. When it is used as a modified separator in Li-S batteries, the Ni-VSe 2 /rGO material with the doped defect and super-thin layered structure can greatly adsorb LiPSs and catalyze the conversion reaction of LiPSs, resulting in effectively reducing LiPSs diffusion and suppressing the shuttle effect. More importantly, the cathode-separator bonding body is first developed as a new strategy of electrode-separator integration in Li-S batteries, which not only could decrease the LiPSs dissolution and improve the catalysis performance of the functional separator as the upper current-collector, but also is good for the high sulfur loading and the low electrolyte/sulfur (E/S) ratio for high energy density Li-S batteries. When the Ni-VSe 2 /rGO-PP (polypropylene, Celgard 2400) modified separator is applied, the Li-S cell can retain 510.3 mA h g -1 capacity after 1190 cycles at 0.5 C. In the electrode-separator integrated system, the Li-S cell can still maintain 552.9 mA h g -1 for 190 cycles at a sulfur loading 6.4 mg cm -2 and 4.9 mA h cm -2 for 100 cycles at a sulfur loading 7.0 mg cm -2 . The experimental results indicate that both the doped defect engineering and the super-thin layered structure design might optimally be chosen to fabricate a new modified separator material, and especially, the electrode-separator integration strategy would open a practical way to promote the electrochemical behavior of Li-S batteries with high sulfur loading and low E/S ratio.

Novel 2D bifunctional layered rare-earth hydroxides@GO catalyst as a functional interlayer for improved liquid-solid conversion of polysulfides in lithium-sulfur batteries

Toward Robust Lithium-Sulfur Batteries Via Advancing Li2S Deposition

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Synergistic mediation of polysulfide immobilization and conversion by a catalytic and dual-adsorptive system for high performance lithium-sulfur batteries

A Conductive/Ferroelectric Hybrid Interlayer for Highly Improved Trapping of Polysulfides in Lithium-Sulfur Batteries

Multifunctional reaction interfaces for capture and boost conversion of polysulfide in lithium-sulfur batteries

Crepe Cake Structured Layered Double Hydroxide/Sulfur/Graphene As a Positive Electrode Material for Li-S Batteries.

2D Cu 2− x Se@graphene multifunctional interlayer boosting polysulfide rapid conversion and uniform Li 2 S nucleation for high performance Li–S batteries

Energy-Saving Synthesis of Functional CoS2/rGO Interlayer With Enhanced Conversion Kinetics for High-Performance Lithium-Sulfur Batteries

Sulfonic Groups Originated Dual-Functional Interlayer for High Performance Lithium-Sulfur Battery

Promoting Polysulfide Conversion by Catalytic Separator with LiNiPO4 and Rgo Hybrids for High Performance Li–S Batteries

Rich Heterointerfaces Enabling Rapid Polysulfides Conversion and Regulated Li2S Deposition for High-Performance Lithium-Sulfur Batteries.

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Improving Performances of Lithium-Sulfur Cells via Regulating of VSe 2 Functional Mediator with Doping-Defect Engineering and Electrode-Separator Integration Strategy

Coordinated Adsorption and Catalytic Conversion of Polysulfides Enabled by Perovskite Bimetallic Hydroxide Nanocages for Lithium‐Sulfur Batteries

Polymorph Interface Strategy Presents Avenues for Kinetics-Enhanced and Dendrite-Free Lithium Sulfur Batteries

Fabricating Ultrathin ZrB2/Graphene Oxide/carboxymethocel Layer Onto Cathode As Effective Polysulfide Shuttling Barrier for Li–S Battery

Bimetallic sulfides heterostructure efficient adsorption and catalytic of polysulfides for high-performance lithium-sulfur batteries

Boosting Polysulfide Catalytic Conversion and Facilitating Li+ Transportation by Ion‐Selective COFs Composite Nanowire for LiS Batteries

Electrocatalytic Interlayer with Fast Lithium–Polysulfides Diffusion for Lithium–Sulfur Batteries to Enhance Electrochemical Kinetics under Lean Electrolyte Conditions