Abstract:This study establishes detailed neural network modeling procedures for the combustion optimization of a power generation unit, equipped with a Selective Catalytic Reduction (SCR) system. In particular, artificial intelligence neural networks were applied due to its capability in treating large pools of data of great nonlinearity. The objective of this study was to reduce nitrogen oxide (NOx) emissions in the stack gas, lower the cost of emissions compliance and minimize the net unit heat rate at this power generation unit at full-load conditions. These procedures include building a database with real coal power plant operating data, modeling the database and using the genetic algorithm to optimize the operating conditions. The operation is optimized with respect to the steam temperature, selective catalyst reactor, and separated over-fire air conditions. Verifications of the results demonstrated that by carrying out the reported study, the pollutant concentrations of the boiler are significantly decreased and the catalyst layer is effectively preserved, while the operation can be maintained stable near the full-load condition. It was found that the average ammonia (NH3) flow to the SCR under optimized conditions was 229 kg/h, while the average NH3 flow under non-optimal operational conditions was 260 kg/h, resulting in a reduction in NH3 consumption of approximately 12 % from the non-optimized operational condition. In the meantime, the SCR inlet (boiler exit) NOx was reduced from 523 mg/Nm3 (non-optimized operational condition) to 444 mg/Nm3 (optimized operational condition), which represent about 15 % reduction. Based on the experience with SCR from manufactures and operators, the SCR catalyst life expectancy has a direct relationship with the SCR inlet NOx concentration and NH3 injection rate. The lower the NOx concentration at the SCR inlet and the less the NH3 injection rate, the longer of the SCR catalyst life will be. Thus, it is expected that the SCR catalyst layer replacement frequency could be reduced by 10 to 20 % over the normal catalyst replacement cycle, while meeting the same environmental NOx emissions limit. Additionally, a Delta Heat Rate was also calculated using best available data from the optimized operational conditions, including boiler load, boiler excess oxygen (O2), fly ash unburned carbon and attemperation flow. Results were compared with the average Delta Heat Rate calculated from baseline tests. It was found that the average Delta Heat Rate from baseline tests are −60 kJ/kWh, while the delta heat rate from the optimized operation condition hours is −118 kJ/kWh. This represents about 0.57 % improvement on unit heat rate from the baseline average.

Driving towards net-zero from the energy sector: Leveraging machine intelligence for robust optimization of coal and combined cycle gas power stations

Artificial intelligence driven smart operation of large industrial complexes supporting the net-zero goal: Coal power plants

Artificial intelligence enabled efficient power generation and emissions reduction underpinning net-zero goal from the coal-based power plants

Artificial Intelligence Modeling-Based Optimization of an Industrial-Scale Steam Turbine for Moving toward Net-Zero in the Energy Sector

Optimization of a 660 MWe Supercritical Power Plant Performance—A Case of Industry 4.0 in the Data-Driven Operational Management Part 1. Thermal Efficiency

Optimization of a 660 MWe Supercritical Power Plant Performance—A Case of Industry 4.0 in the Data-Driven Operational Management. Part 2. Power Generation

Strategic-level performance enhancement of a 660 MWe supercritical power plant and emissions reduction by AI approach

Development of novel dynamic machine learning-based optimization of a coal-fired power plant

Maximizing Steam Turbine Efficiency in Coal Fired Power Plant Through Artificial Intelligence-Based Digital Turbine Optimization (D-TOP)

AI-coherent data-driven forecasting model for a combined cycle power plant

Reduction of emissions and improvement of dynamic responses of a supercritical clean coal generation unit via neural network inverse control strategy

Machine Learning Optimization and 4E Analysis of a CCHP System Integrated into a Greenhouse System for Carbon Dioxide Capturing

Combustion optimization of a coal-fired power plant boiler using artificial intelligence neural networks

Data-driven boiler efficiency and NOx characteristic variable selection and combustion optimization

NOx emission reduction of coal‐fired power plants through data‐driven model and particle swarm optimization

Combustion optimization of ultra supercritical boiler based on artificial intelligence

ANN-GA based optimization of a high ash coal-fired supercritical power plant

Physics-informed deep learning and linear programming for efficient optimization of combined cycle power plants

Optimization study of intelligent decision-making system for coal processing plant based on big data analysis

Performance prediction of a clean coal power plant via machine learning and deep learning techniques