Abstract:The heat transfer performance of showerhead film cooling on the vane leading edge was numerically investigated considering representative lean burn combustor swirling outflow. Three cases with different inflow conditions (uniform inflow, positive swirling inflow, and negative swirling inflow) and three cases with different film injection angles (45°, 90°, and 135°) were studied. As the first study to explore the showerhead film design principle under swirling inflow, a newly designed asymmetrical counter-inclined (45° and 135°) film cooling was also proposed. To examine the design principles, the cooling effectiveness, heat transfer augmentation, and heat flux reduction of the newly designed asymmetrical case were evaluated compared with the traditional symmetrical case. The results show that the swirling inflow introduces obvious radial pressure gradient on the vane. The radial pressure gradient is the key influence factor to deflect the coolant migration, decrease the cooling effect, and degrade the homogeneity. The film with opposite orientation to the radial pressure gradient can weaken the deflect effect. The radial pressure gradient direction differs in different regions, making it impossible for the film with congruent injection orientation to simultaneously resist the pressure gradient on the entire vane. For the new design, the boundary line of the counter-inclined holes is consistent with the twisted stagnation line to guarantee that the injection orientation of all the film holes is opposite to the radial pressure gradient. As expected, the new design can effectively weaken the deflection effect and show uniform film distribution. The higher coolant mass ratio provides more obvious enhancement effect. At coolant mass ratio 3.71% and 4.56%, the overall area-averaged heat flux reduction (Δ q) is increased by 0.311 and 0.576, and the overall area-averaged relative standard deviation is reduced by 12.17 and 11.66 compared with the traditional design. The results have confirmed the adaptability of the film design principle under swirling inflow.

Study on characteristics of microchannel jet for showerhead in different fluid regimes based on hybrid NS-DSMC methodology

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Numerical study on jet effect in the vertical showerhead MOCVD reactor

Experimental Study of the Effects of Showerhead Configuration on Large-Area Silicon-Nitride Thin Film by Plasma-Enhanced Chemical Vapor Deposition

Study on the Atomization Characteristics of High-pressure Nozzle with an In-line Distributor

Transition from Bubbling to Jetting in Submerged Gas-Liquid Jets Through a Minichannel

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Experimental Investigation of Non-Newtonian Liquid Flow in Microchannels

Experimental investigation of internal and external flow fields of jetting nozzles with different structures

Numerical and experimental investigation of dripping and jetting flow in a coaxial micro-channel

Piv Study On Water Spray Mixing In A Confined Air Crossflow

Showerhead film cooling injection orientation design on the turbine vane leading edge considering representative lean burn combustor outflow

Experimental Study on the Stable Steam Jet in Subcooled Water Flow in a Rectangular Mix Chamber

Numerical study on the atomization mechanism and energy characteristics of synthetic jet/dual synthetic jets

Numerical study on the hydrodynamics behavior of a central insert microchannel

Phase Distribution of Gas–Liquid Slug–Annular Flow in Horizontal Parallel Micro-Channels

Mass Transport Analysis and Structure Design of Showerhead MOCVD Reactor

Numerical study of discharge characteristics of an atmospheric pressure plasma jet with a coaxial dual-channel inlet

Effects of Heat Flux, Mass Flux and Two-Phase Inlet Quality on Flow Boiling in a Vertical Superhydrophilic Microchannel

Roughness Effect on Flow and Thermal Boundaries in Microchannel/nanochannel Flow Using Molecular Dynamics‐continuum Hybrid Simulation