Hydrogen‐Bonded Metal–Organic Framework Nanosheet as a Proton Conducting Membrane for an H2/O2 Fuel Cell

Agamoni Pathak,Haruki Watanabe,Biplab Manna,Kazuto Hatakeyama,Shintaro Ida

DOI: https://doi.org/10.1002/smll.202400222

IF: 13.3

2024-03-15

Small

Abstract:A self‐supporting membrane with proton conductivity and gas barrier properties is prepared from nanosheets of Bismuth‐based coordination polymer's nanosheets. Fuel cells using this membrane as electrolyte exhibits an open circuit voltage of 1 V and a relatively good power density. Proton‐conducting metal–organic frameworks (MOFs) have attracted attention as potential electrolytes for fuel cells. However, research progress in utilizing MOFs as electrolytes for fuel cells has been limited, mainly due to challenges associated with issues such as the fabrication of MOF membranes, and hydrogen crossover through the MOF's pores. Here, we report proton conductivity and fuel cell performance of a self‐standing membrane prepared from of a bismuth subgallate MOF nanosheets with non‐porous structure are reported. The fabricated MOF nanosheet membrane with no binding agent exhibitsed structural anisotropy. The proton conductivity in the membrane thickness direction (4.4 × 10−3 S cm−1) at 90 °C and RH 100% is observed to be higher than that in the in‐plane direction of the membrane (3.3 × 10−5 S cm−1). The open circuit voltage (OCV) of a fuel cell with ≈120 μm proton conducting membrane is 1.0 V. The non‐porous nature of the MOF nanosheets contributes to the relatively high OCV. A fuel cell using ≈40 μm membrane as proton conducting electrolyte records a maximum of 25 mW cm−2 power density and a maximum of 109 mA cm−2 current density with 0.91 V OCV at 80 °C in humid conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology