Ka-Band Wide-Angle Scanning Phased Array with Dual Circular Polarization

Lei Zhang,Jianyong Yin
DOI: https://doi.org/10.3390/electronics13122238
IF: 2.9
2024-06-08
Electronics
Abstract:A wide-angle scanning phased array with dual circular polarization in the Ka-band is presented in this paper. To improve the scanning capability of the phased array, the microstrip element is modified by loading many metal posts at its center and periphery. In addition, a stripline coupler is designed to achieve dual circularly polarized (CP) radiation, and the inner conductor of the subminiature micro-push-on (SSMP) connectors for feeding the coupler is extended to the top layer of the multilayer element by introducing an open stub, which simplifies the assembly process between the SSMP connector and multilayer printed circuit board (PCB) due to through-hole soldering instead of blind-hole soldering. The proposed element can cover a frequency range from 28 GHz to 30.5 GHz with a relative bandwidth of 8.5% in the Ka-band. An 8 × 8 phased array is constructed based on this proposed element, and a wide-angle scanning range from −65° to +65° is obtained for the dual circular polarization. The proposed array has a gain fluctuation of 5.1 dB and an axial ratio (AR) of less than 3.3 dB during beam-steering. The prototype is fabricated and measured, with a good agreement between the measured and simulated results. The proposed phased array can be applied in a Ka-band millimeter-wave (MMW) communication system.
engineering, electrical & electronic,computer science, information systems,physics, applied
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to design and implement a phased - array antenna that can perform wide - angle scanning (±65°) in the Ka - band (28 GHz to 30.5 GHz) and has dual - circular polarization characteristics. Specifically, the paper aims to: 1. **Improve scanning ability**: By improving the micro - strip antenna element and loading multiple metal posts at its center and edge, the wide - angle scanning ability of the antenna is enhanced. 2. **Achieve dual - circular - polarized radiation**: An improved stripline coupler is designed to achieve dual - circular - polarized (right - hand circular polarization and left - hand circular polarization) radiation, thereby improving the anti - interference ability and multipath fading performance of the communication system. 3. **Simplify the assembly process**: By extending the inner conductor of the SSMP connector to the top layer of the multilayer PCB and introducing an open - circuit stub to compensate for the deterioration of the reflection coefficient, the assembly process is simplified and the complexity of blind - via soldering is avoided. 4. **Verify the practical application effect**: An 8×8 phased - array antenna is constructed, and simulations and actual measurements are carried out to verify its gain fluctuation and axial ratio (AR) performance within the wide - angle scanning range. ### Specific problem analysis - **Frequency band selection**: The selection of the Ka - band (28 GHz to 30.5 GHz) is to meet the requirements of millimeter - wave communication systems for high data rates and large bandwidths. - **Wide - angle scanning requirements**: In order to provide uninterrupted communication on mobile platforms, a wide scanning range (±65°) needs to be covered to cope with high - path losses and dynamic environmental changes. - **Advantages of dual - circular polarization**: Compared with single - circular polarization, dual - circular polarization can increase channel capacity, has better anti - polarization - interference, anti - multipath - fading and immunity to Faraday rotation, etc., and is suitable for satellite communication systems. ### Summary By improving the antenna element design and coupler structure, the paper successfully realizes a phased - array antenna with wide - angle scanning ability and dual - circular polarization characteristics in the Ka - band. This achievement provides new solutions and technical support for the application of millimeter - wave communication systems.