Abstract:The strength of a square plate with a central crack at normal separation was studied within the framework of the Neuber–Novozhilov approach using a modified Leonov–Panasyuk–Dugdale model using an additional parameter, the diameter of the plasticity zone (width of the pre-fracture zone). As a model of a deformable solid body, a model of an ideal elastic-plastic material with a limiting relative elongation was chosen. This class of materials includes, for example, low-alloy steels used in structures operating at temperatures below the cold brittleness threshold. In the presence of a singular feature in the stress field in the vicinity of the crack tip, it is proposed to use a two-parameter discrete integral strength criterion. The deformation fracture criterion is formulated at the tip of a real crack, and the force criterion for normal stresses, taking into account averaging, is formulated at the tip of a model crack. The lengths of real and model cracks differ by the length of the pre-fracture zone. The constitutive equations of the analytical model are analyzed in detail depending on the characteristic linear dimension of the material structure. Simple formulas suitable for verification calculations for the critical breaking load and the length of the pre-fracture zone are obtained. Numerical modeling of the propagation of plasticity zones in square plates under quasi-static loading has been performed. In the numerical model, the updated Lagrangian formulation of the equations of mechanics of a deformable solid body is used, which is most preferable for modeling the deformation of bodies made of an elastic-plastic material at large deformation. The plastic zone in the vicinity of the crack tip is obtained by the finite element method. The results of analytical and numerical prediction of plate fracture under plane deformation are compared. It is shown that the results of numerical experiments are in good agreement with the results of calculations using the analytical model of fracture of materials with a structure under normal separation. Diagrams of quasi-brittle and quasi-ductile fracture of a structured plate are constructed.

Mode II Fracture of an Elastic-Plastic Sandwich Layer

Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints

Simulation Of Elastoplastic Fracture Of A Center Cracked Plate

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

The effects of shear and near tip deformations on interface fracture of symmetric sandwich beams

Mode I crack tip fields: strain gradient plasticity theory versus J2 flow theory

Weak interface-induced repeated kinking of a central crack in a brittle multilayered plate under remote shear loading

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Mode II fracture of an MMA adhesive layer: Theory versus experiment

Fracture Toughness of Layered Structures: Embrittlement Due to Confinement of Plasticity

Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study

Plastic zones for ductile layer sandwiched between two different substrates

A micromechanics-based variational phase-field model for fracture in geomaterials with brittle-tensile and compressive-ductile behavior

Mode II Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures: the Effects of Frictional Stresses Between the Crack Edges

A compressible layerwise third-order shear deformation theory with transverse shear stress continuity for laminated sandwich plates

A multiscale analytical framework for mode I crack in staggered composites

The Mode I Crack Growth Resistance of Metallic Foams

Study on Fracture Characteristics of Layered Sandstone under Asymmetric Loading

Nearly circular shear mode cracks

Discrete element modeling on crack evolution behavior of sandstone containing two oval flaws under uniaxial compression

Cohesive Models for Anti-Plane Mode Fracture in Dissimilar Structures: Effect of Small/Large Scale Yielding Conditions on Computed Fracture Load