Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Behavior of steel tubed rubberized geopolymer concrete columns under axial compression: Experimental study and analytical modeling

Stress-Strain Behavior of FRP-Confined Recycled Aggregate Concrete in Square Columns of Different Sizes

Probabilistic Models of Concrete Compressive Strength and Elastic Modulus with Rubber Aggregates

Axial compressive behavior of rubberized concrete-filled steel tube short columns

Behavior of Different-Sized FRP-Confined Square Compound Concrete Columns Containing Recycled Concrete Lumps

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Compressive behavior of sustainable rubberized concrete‐filled steel tube columns having various recycled tire rubber aggregate contents and developing a predictive design model

Seismic behavior of polypropylene fiber reinforced rubber concrete-filled circular steel tubular columns

A REVIEW PAPER ON THE AXIAL BEHAVIOUR OF CONCRETE FILLED STEEL TUBES CONTAINING HIGH VOLUME WASTE TYRE RUBBER CONCRETE.

Research on eccentric compressive behavior of steel fiber reinforced recycled concrete-filled GFRP tube columns

Structural performance of geopolymer-concrete-filled steel tube members subjected to compression and bending

Compressive Behavior of Double-Skin Tubular Stub Columns with Recycled Aggregate Concrete and a PET FRP Jacket

Experimental Study on Short Steel Tube Columns Filled with Recycled Large Aggregate-Self Compacting Concrete Subjected to Compression

Experimental Study and Analysis on Axial Compression Performance of High-Strength Recycled Concrete-Filled Steel Tube Column in Corrosive Environments

Axial compression behavior of mechanized filament-wound GFRP-steel tubed concrete stub columns

Experimental and numerical study on axial compressive behaviors of reinforced UHPC-CFST composite columns

Seismic Performance of Recycled Aggregate Geopolymer Concrete-Filled Double Skin Tubular Columns with Internal Steel and External FRP Tube

Behaviors of FRP confined rectangular concrete-filled thin-walled steel tubular stub columns using high-strength materials under axial load

Experimental Study and Numerical Analysis of the Seismic Performance of Glass-Fiber Reinforced Plastic Tube Ultra-High Performance Concrete Composite Columns

Seismic behavior of I-steel reinforced concrete-filled GFRP tubular columns