Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Thermo-economic optimization of biomass-fired organic Rankine cycles combined heat and power system coupled CO2 capture with a rated power of 30 kW

Parametric analysis and multi-objective optimization of biomass-fired organic Rankine cycle system combined heat and power under three operation strategies

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Energy, Exergy, Economic Performance Investigation and Multi-Objective Optimization of Reversible Heat Pump-Organic Rankine Cycle Integrating with Thermal Energy Storage

Cooperative Optimization of System Parameters and Heat Exchanger Structure for Geothermal Organic Rankine Cycle

Exergoeconomic Analysis and Optimization of a Biomass Integrated Gasification Combined Cycle Based on Externally Fired Gas Turbine, Steam Rankine Cycle, Organic Rankine Cycle, and Absorption Refrigeration Cycle

Exergoeconomic Evaluation of a Cogeneration System Driven by a Natural Gas and Biomass Co-Firing Gas Turbine Combined with a Steam Rankine Cycle, Organic Rankine Cycle, and Absorption Chiller

Thermoeconomic analysis and multiobjective optimization of a combined gas turbine, steam, and organic Rankine cycle

Exergy, exergoeconomic, and exergoenvironmental analyses of novel solar- and biomass-driven trigeneration system integrated with organic Rankine cycle

Dynamic behaviour and performance evaluation of a biomass-fired organic Rankine cycle combined heat and power (ORC-CHP) system under different control strategies

Investigation of a Biomass-Driven Cogeneration System Integrated with an Externally Fired Gas Turbine, Organic Rankine Cycle, and Absorption Refrigeration Cycle: Thermodynamic and Exergoeconomic Analyses and Optimization

Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization

Thermal performance analysis of a biomass-fired organic rankine cycle

Thermo-economic analysis and multi-criteria optimization of an integrated biomass-to-energy power plant

Multi-variable study and MOPSO-based multi-objective optimization of a novel cogeneration plant using biomass fuel and geothermal energy: A complementary hybrid design

Energy, exergy, exergoeconomic, and environmental analyses and multi-objective optimization of a biomass-to-energy integrated thermal power plant

Exergoeconomic analysis and multi-objective optimization of a CCHP system based on SOFC/GT and transcritical CO 2 power/refrigeration cycles

Thermodynamic analyses and optimization of a novel CCHP system integrated organic Rankine cycle and solar thermal utilization

An integrated energy storage system consisting of Compressed Carbon dioxide energy storage and Organic Rankine Cycle: Exergoeconomic evaluation and multi-objective optimization