Abstract:Exergoeconomic assessment of an energy conversion system based on energy-exergy analysis and appropriate economic principles, is essential to identify the costs of the inefficiencies both for the whole integrated system and for individual energy components. The current study contributes to an exergoeconomic analysis focusing on the steady-state performance of a biomass-fed combined heat and power (CHP) system including a two-stage auto-thermal biomass gasifier, a direct internal reforming planar solid oxide fuel cell (DIR-PSOFC) and a micro-gas turbine (mGT). A one-dimensional model of the DIR-PSOFC is used to investigate the temperature gradient within the solid structure of the fuel cell under different operating conditions. In order to assess the effect of the main system input parameters on the performance of the cogeneration system, a comprehensive parametric analysis is carried out. The results show that the highest rate of exergy destruction takes place in the gasifier with an amount of 39.23%, followed by the afterburner and the SOFC due to the highly irreversible nature of the process of these components. The system input exergy supplied by biomass is 525.7 kW, of which 53.2% is wasted in the system components and the exergy efficiency of the total CHP system is determined to be 49.72%. Furthermore, the results indicate that the highest exergy destruction cost rate is related to the afterburner with 2.39 ($⁄h). Based on the results of the sensitivity analysis, the trends of the performance parameters demonstrate some conflicts with the variation of the operating parameters, which implies the necessity of an optimization procedure. In all the operating conditions considered, the temperature difference along the cell length is kept below the maximum allowable temperature gradient, which is 150 K. Two-step multi-objective optimization has been conducted by use of non-dominated sorting genetic algorithm technique. Significant and newsworthy relationships between the optimal operating parameters and the considered design variables have been unveiled using the Pareto-based multi-objective optimization procedure.

Parametric analysis and multi-objective optimization of biomass-fired organic Rankine cycle system combined heat and power under three operation strategies

Thermo-economic optimization of biomass-fired organic Rankine cycles combined heat and power system coupled CO2 capture with a rated power of 30 kW

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Dynamic behaviour and performance evaluation of a biomass-fired organic Rankine cycle combined heat and power (ORC-CHP) system under different control strategies

Exergoeconomic Evaluation of a Cogeneration System Driven by a Natural Gas and Biomass Co-Firing Gas Turbine Combined with a Steam Rankine Cycle, Organic Rankine Cycle, and Absorption Chiller

Exergy, exergoeconomic, and exergoenvironmental analyses of novel solar- and biomass-driven trigeneration system integrated with organic Rankine cycle

Exergoeconomic analysis and multi-objective optimization of a CCHP system based on SOFC/GT and transcritical CO 2 power/refrigeration cycles

Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization

Thermoeconomic analysis and multiobjective optimization of a combined gas turbine, steam, and organic Rankine cycle

Exergoeconomic Analysis and Optimization of a Biomass Integrated Gasification Combined Cycle Based on Externally Fired Gas Turbine, Steam Rankine Cycle, Organic Rankine Cycle, and Absorption Refrigeration Cycle

Exergoeconomic Analysis and Multi-Objective Optimization of an Integrated CHP System Based on Syngas-Fueled Planar Solid Oxide Fuel Cell

Multiobjective optimization of a cogeneration system based on gas turbine, organic rankine cycle and double-effect absorbtion chiller

Configuration Strategy and Performance Analysis of Combined Heat and Power System Integrated with Biomass Gasification, Solid Oxide Fuel Cell, and Steam Power System

Investigation of a Biomass-Driven Cogeneration System Integrated with an Externally Fired Gas Turbine, Organic Rankine Cycle, and Absorption Refrigeration Cycle: Thermodynamic and Exergoeconomic Analyses and Optimization

Thermodynamic performance analyses for CCHP system coupled with organic Rankine cycle and solar thermal utilization under a novel operation strategy

Thermodynamic analyses and optimization of a novel CCHP system integrated organic Rankine cycle and solar thermal utilization

Energy, exergy, exergoeconomic, and environmental analyses and multi-objective optimization of a biomass-to-energy integrated thermal power plant

Design and analysis of an innovative biomass-powered cogeneration system based on organic flash and supercritical carbon dioxide cycles

Multi-variable study and MOPSO-based multi-objective optimization of a novel cogeneration plant using biomass fuel and geothermal energy: A complementary hybrid design