Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. This research work focuses on implementation of the FinFET-based complementary metal-oxide-semiconductor (CMOS) Full Adder circuits for different transistor configurations using ASAP7 FinFET model. First, this work examines FinFET-based AND-OR-invert (AOI) gates using different topologies, and second, a FinFET-based CMOS Full Adder circuit at the 7[math]nm technology node is analyzed with respect to its process, voltage and temperature (PVT) variability effect measured in terms of the normalized standard deviation of different performance metrics. The comparison is made between conventional (CFFA1) and proposed (FFA2, FFA3, FFA4, FFA5, FFA6, FFA7 and FFA8) FinFET-based CMOS full adder circuits. The aim is to determine the optimal design configuration of the FinFET full adder circuit with the minimum impact of PVT variability. On examining the power delay product (PDP) variability, it is found that variations in FFA2, FFA3, FFA4, FFA5, FFA6, FFA7 and FFA8 are significantly lower than CFFA1 by 6.30%, 4.68%, 10.30%, 65.48%, 68.05%, 65.61% and 17.20%, respectively. Among all the proposed configurations, normalized standard deviation [math] for the PDP metric is lowest in FFA6, followed by FFA7, FFA5, FFA8, FFA4, FFA2 and FFA3. The normalized standard deviation [math] for power dissipation, however, is lowest in FFA8. In addition, a layout comparison analysis of conventional and proposed full adder circuits reveals that FFA7 has the least area, followed by FFA8, FFA6, FFA5, FFA3, FFA4, FFA2 and CFFA1. The area of FFA2, FFA3, FFA4, FFA5 and FFA6 has decreased by 3.29%, 3.51%, 3.50%, 5.14% and 5.52%, while FFA7 and FFA8 have experienced a decrease in area by 13.87% and 14.36%, respectively, as compared to conventional CFFA1. The proposed layout of FinFET-based CMOS Full Adders can be directly transferred into the foundry's production line for manufacturing purposes. The overall investigation led us to conclude that FFA8 is the most efficient of all due to the lowest power variation, lower delay variation and lower PDP variation, moreover it has a reduced layout area among all the discussed designs. However, there is a tradeoff in terms of penalty in nominal power, propagation delay and PDP in the proposed topologies.

A New CMOS FTFNDITA Implementation and Its Application

An Inductorless 5-GHz Differential Dual Regulated Cross-Cascode Transimpedance Amplifier using 40 nm CMOS

0.5-V High Linear Fully Differential Multiple-Input Bulk-Driven OTA With Effective Self-Embedded CMFB

CNTFET Based 4-Trit Hybrid Ternary Adder-Subtractor for low Power & High-Speed Applications

Utilization of Negative-Capacitance FETs to Boost Analog Circuit Performances

CNTFET Based Fully Differential First Order All Pass Filter

0.5 V Multiple-Input Fully Differential Operational Transconductance Amplifier and Its Application to a Fifth-Order Chebyshev Low-Pass Filter for Bio-Signal Processing

CNTFET based comparators: design, simulation and comparative analysis

A low power high bandwidth four quadrant analog multiplier in 32 nm CNFET technology

Multifunctional high-frequency circuit capabilities of ambipolar carbon nanotube FETs

CMOS design of computational current-mode static and dynamic functions based on analog translinear cell

Design of low‐voltage low‐noise operational transconductance amplifiers for low frequency applications

The Effect of a Dual Oxide - Dual Gate Material and a Sensitivity Analysis on the Performance of a Junctionless Tunnel FET

Improved analog and AC performance for high frequency linearity based applications using gate-stack dual metal (DM) nanowire (NW) FET (4H-SiC)

High-Frequency Tunable Grounded & Floating Incremental-Decremental Meminductor Emulator and Application

CMOS VM/CM Tow–Thomas-Equivalent Biquad Filters and a Linear VCO Using Recently Proposed CMOS Transconductors

Device design and optimization of CNTFETs for high-frequency applications

Design of High Performance Operational Transconductance Amplifier

Impact of Variability on Novel Transistor Configurations in Adder Circuits at 7[math]nm FinFET Technology

Circuit Design and Verification of On-Chip Femto-Ampere Current Mode Circuit Using 0.18μm CMOS Technology

Negative-to-Positive Differential Resistance Transition in Ferroelectric FET: Physical Insight and Utilization in Analog Circuits