Abstract:CO2 capture via physical adsorption on activated porous carbons represents a promising solution towards effective carbon emission mitigation. Additionally, production costs can be further decreased by utilising biomass as the main precursor and applying energy-efficient activation. In this work, we developed novel cellulose-based activated carbons modified with amines (diethylenetriamine (DETA), 1,2-bis(3-aminopropylamino)ethane (BAPE), and melamine (MELA)) with different numbers of nitrogen atoms as in situ N-doping precursors. We investigated the effect of hydrothermal and thermal activation on the development of their physicochemical properties, which significantly influence the resulting CO2 adsorption capacity. This process entailed an initial hydrothermal activation of biomass precursor and amines at 240 °C, resulting in C+DETA, C+BAPE and C+MELA materials. Thermal samples (C+DETA (P), C+BAPE (P), and C+MELA (P)) were synthesised from hydrothermal materials by subsequent KOH chemical activation and pyrolysis in an inert argon atmosphere. Their chemical and structural properties were characterised using elemental analysis (CHN), infrared spectroscopy (IR), scanning electron microscopy (SEM), and thermogravimetric analysis (TG). The calculated specific surface areas (SBET) for thermal products showed higher values (998 m2 g−1 for C+DETA (P), 1076 m2 g−1 for C+BAPE (P), and 1348 m2 g−1 for C+MELA (P)) compared to the hydrothermal products (769 m2 g−1 for C+DETA, 833 m2 g−1 for C+BAPE, and 1079 m2 g−1 for C+MELA). Carbon dioxide adsorption as measured by volumetric and gravimetric methods at 0 and 25 °C, respectively, showed the opposite trend, which can be attributed to the reduced content of primary adsorption sites in the form of amine groups in thermal products. N2 and CO2 adsorption measurements were carried out on hydrothermal (C) and pyrolysed cellulose (C (P)), which showed a several-fold reduction in adsorption properties compared to amine-modified materials. The recyclability of C+MELA, which showed the highest CO2 adsorption capacity (7.34 mmol g−1), was studied using argon purging and thermal regeneration over five adsorption/desorption cycles.

The potential application of cellulose acetate membrane for CO2 adsorbent

CO2 Facilitated Transport Through an Acrylamide and Maleic Anhydride Copolymer Membrane

Aminated Microcrystalline Cellulose Aerogel for Efficient CO2 Capture

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Cellulose Acetate–Ionic Liquid Blends as Potential Polymers for Efficient CO2 Separation Membranes

Effective CO2 adsorption in hybrid 2D material with cellulose and its derivatives

Cellulose–Amine Porous Materials: The Effect of Activation Method on Structure, Textural Properties, CO2 Capture, and Recyclability

Epoxy-functionalized polyethyleneimine modified epichlorohydrin-cross-linked cellulose aerogel as adsorbents for carbon dioxide capture

Enhancing the CO2/CH4 Separation Properties of Cellulose Acetate Membranes Using Polyethylene Glycol Methyl Ether Acrylate Radiation Grafting

Hollow Fiber Contained Hydrogel-Ca Membrane Contactor for Carbon Dioxide Removal from the Enclosed Spaces

Cellulose acetate based sustainable nanostructured membranes for environmental remediation

Study on the Performance of Cellulose Triacetate Hollow Fiber Mixed Matrix Membrane Incorporated with Amine-Functionalized NH2-MIL-125(Ti) for CO2 and CH4 Separation

Enhanced carbon dioxide adsorption by amine-modified KCC-1

Post‐combustion carbon dioxide adsorption of concurrent activated and surface modified palm kernel shell‐derived activated carbon

The effect of humidity on the enhanced CO2 adsorption of amine-functionalized microporous activated carbon

Amine Infused Fly Ash Grafted Acrylic Acid/Acrylamide Hydrogel for Carbon Dioxide (CO2) Adsorption and Its Kinetic Analysis

Lignocellulose-based adsorbents: A spotlight review of the effective parameters on carbon dioxide capture process

CO2‐Responsive Copolymers for Membrane Applications, Synthesis, and Performance Evaluation

A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement

Mixtures of Cellulose Fibers from Pineapple Leaves, Ionic Liquid, and Alkanolamines for CO2 Capture

Enhanced CO2 Capture through SAPO-34 Impregnated with Ionic Liquid