Abstract:All‐solid‐state batteries (ASSBs) promise high energy density and safety, but as most research is focusing on optimizing individual components, their impact on key performance parameters is often disregarded. This review evaluates market‐available solid electrolyte separators and electrode materials, suggesting, that while thick oxide electrolytes fall short, thinner separators combined with recently presented composite cathode designs can outperform current lithium‐ion batteries, achieving energy densities up to 400 Wh/kg . The all‐solid‐state battery (ASSB) concept promises increases in energy density and safety; consequently recent research has focused on optimizing each component of an ideal fully solid battery. However, by doing so, one can also lose oversight of how significantly the individual components impact key parameters. Although this review presents a variety of materials, the included studies limit electrolyte‐separator choices to those that are either fully commercial or whose ingredients are readily available; their thicknesses are predefined by the manufacturer or the studies in which they are included. However, we nevertheless discuss both electrode materials. Apart from typical materials, the list of anode materials includes energy‐dense candidates, such as lithium metal, or anode‐free approaches that are already used in Li‐ion batteries. The cathode composition of an ASSB contains a fraction of the solid electrolyte, in addition to the active material and binders/plasticizers, to improve ionic conductivity. Apart from the general screening of reported composites, promising composite cathodes together with constant‐thickness separators and metallic lithium anodes are the basis for studying theoretically achievable gravimetric energy densities. The results suggest that procurable oxide electrolytes in the forms of thick pellets (>300 μm) are unable to surpass the performance of already commercially available Li‐ion batteries. All‐solid‐state cells are already capable of exceeding the performance of current batteries with energy densities of 250 Wh kg−1 by pairing composite cathodes with high mass loadings and using separators that are less than 150 μm thick, with even thinner electrolytes (20 μm) delivering more than 350 Wh kg−1.

Composite cathode for all-solid-state lithium batteries: Progress and perspective

Recent advances of composite electrolytes for solid-state Li batteries

Solid Polymer Electrolytes-Based Composite Cathodes for Advanced Solid-State Lithium Batteries

Research Progress on the Composite Methods of Composite Electrolytes for Solid-State Lithium Batteries

Design of Composite Cathodes for Sulfide-Based All-Solid-state Batteries

Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries

Strategies to Regulate the Interface Between Li Metal Anodes and All-Solid-state Electrolytes

Practical Application of All‐Solid‐State Lithium Batteries Based on High‐Voltage Cathodes: Challenges and Progress

Toward High Performance All‐Solid‐State Lithium Batteries with High‐Voltage Cathode Materials: Design Strategies for Solid Electrolytes, Cathode Interfaces, and Composite Electrodes

A review of composite solid-state electrolytes for lithium batteries: fundamentals, key materials and advanced structures

Challenges and Development of Composite Solid Electrolytes for All-solid-state Lithium Batteries

Recent progress of composite solid polymer electrolytes for all-solid-state lithium metal batteries

Recent progress in all-solid-state lithium batteries: The emerging strategies for advanced electrolytes and their interfaces

Research progress on interfacial problems and solid-state electrolytes in lithium batteries

Robust All-Solid-State Lithium Metal Batteries Enabled by a Composite Lithium Anode with Improved Bulk Li Diffusion Kinetics Properties

Composite Cathode Design for High-Energy All-Solid-State Lithium Batteries with Long Cycle Life

Solid‐State Electrolytes for Lithium Metal Batteries: State‐of‐the‐Art and Perspectives

Challenges and Prospects of All‐Solid‐State Electrodes for Solid‐State Lithium Batteries

Constructing Low‐Impedance Li7La3Zr2O12‐Based Composite Cathode Interface for All‐Solid‐State Lithium Batteries

All‐solid‐state Li‐ion batteries with commercially available electrolytes: A feasibility review

Critical Current Densities for High-Performance All-Solid-State Li-Metal Batteries: Fundamentals, Mechanisms, Interfaces, Materials, and Applications