Abstract:Graphite films are widely used in microelectronic devices as heat-dissipation materials due to their high thermal conductivity, low thermal expansion coefficient and light weight. In the 5G era, the miniaturization and integration of microelectronic devices are continuously improving, so higher requirements are put forward for heat-dissipation materials. Therefore, flexible graphite films with high thermal conductivity are urgently needed. In this work, nickel-coated CNTs (Ni@CNTs) were prepared first as additives to be incorporated into PI matrix via in-situ polymerization, and then the Ni@CNTs/PI composite films were carbonized and graphitized at high temperature to form graphite films. In this composite system, nickel particles can effectively improve the graphitization degree of the obtained graphite films, which is beneficial to the improvement of the thermal conductivity, as well as the CNTs can effectively enhance the cross-plane thermal conductivity and mechanical strength of the graphite films. The graphite films obtained from the graphitization of PI/Ni@CNTs (0.4 wt%) have a perfect graphene structure and optimal properties. The optimal layer thickness of graphene is 0.3354 nm, while the d-spacing of the graphite layers is around 0.3358 nm. The in-plane thermal conductivity is 1.13 times greater than that of graphite film made from pure PI film (G0 film), which has a value of 1198.5 Wm-1K-1. The cross-plane thermal conductivity is 6.26 W·m-1·K-1, which is 2.96 times of G0 film (2.11 W·m-1·K-1). The bending strength is 72.3Mpa, which is 2.28 times of G0 film (31.7 Mpa). The introduction of Ni@CNTs greatly improves the comprehensive properties of graphite films, the preparation technology has an important guiding significance for the preparation of high thermal conductivity flexible graphite films, and has important industrial application value.

Thermal Conductivity of Graphite Thin Films Grown by Low Temperature Chemical Vapor Deposition on Ni (111)

Characterization Of Graphene Grown On Bulk And Thin Film Nickel

Thermal Conductivity of Nanoscale Thin Nickel Films

Fast, wafer-scale growth of a nanometer-thick graphite film on Ni foil and its structural analysis

Thermal Conductivity of Graphene Nanoribbons with Regular Isotopic Modification

Flexible graphite films with high cross-plane thermal conductivity prepared by graphitization of polyimide catalyzed by Ni-coated-CNTs

Electrical and thermal conductivity of low temperature CVD graphene: the effect of disorder

Anisotropy of Thermal Conductivity of Free-Standing Reduced Graphene Oxide Films Annealed at High Temperature

High Thermal Conductivity of Submicrometer Aluminum Nitride Thin Films Sputter-Deposited at Low Temperature

Low-Temperature Nitrogen Doping of Nanocrystalline Graphene Films with Tunable Pyridinic-N and Pyrrolic-N by Cold-Wall Plasma-Assisted Chemical Vapor Deposition

Directional Architecture of Graphene/ceramic Composites with Improved Thermal Conduction for Thermal Applications

Highly Ordered and Dense Thermally Conductive Graphitic Films from a Graphene Oxide/Reduced Graphene Oxide Mixture

Thermal conductivity of crystalline AlN and the influence of atomic-scale defects

Crystallization characteristics and chemical bonding properties of nickel carbide thin film nanocomposites

Thermal Expansion and Thermal Conductivity of Ni/Graphene Composite: Molecular Dynamics Simulation

Thermal Conductivity of Small Nickel Particles

Tunable thermal conductivity of thin films of polycrystalline AlN by structural inhomogeneity and interfacial oxidation

Epitaxial (111) Films of Cu, Ni, and Cu$_xNi$_y$ on α-Al$_2$O$_3$(0001) for Graphene Growth by Chemical Vapor Deposition

Characterization of Ultralow Thermal Conductivity in Anisotropic Pyrolytic Carbon Coating for Thermal Management Applications

Temperature Dependence of Thermal Conductivity of Polycrystalline Graphene: Thermally Enhanced Kapitza Conductance

Low-temperature thermal conductivity in polycrystalline graphene