Abstract:Lithium metal anodes can largely enhance the energy density of rechargeable batteries because of the high theoretical capacity and the high negative potential. However, the problem of lithium dendrite formation and low Coulombic efficiency (CE) during electrochemical cycling must be solved before lithium anodes can be widely deployed. Herein, a new atomic layer deposition (ALD) chemistry to realize the low-temperature synthesis of homogeneous and stoichiometric lithium fluoride (LiF) is reported, which then for the first time, as far as we know, is deposited directly onto lithium metal. The LiF preparation is performed at 150 °C yielding 0.8 Å/cycle. The LiF films are found to be crystalline, highly conformal, and stoichiometric with purity levels >99%. Nanoindentation measurements demonstrate the LiF achieving a shear modulus of 58 GPa, 7 times higher than the sufficient value to resist lithium dendrites. When used as the protective coating on lithium, it enables a stable Coulombic efficiency as high as 99.5% for over 170 cycles, about 4 times longer than that of bare lithium anodes. The remarkable battery performance is attributed to the nanosized LiF that serves two critical functions simultaneously: (1) the high dielectric value creates a uniform current distribution for excellent lithium stripping/plating and ultrahigh mechanical strength to suppress lithium dendrites; (2) the great stability and electrolyte isolation by the pure LiF on lithium prevents parasitic reactions for a much improved CE. This new ALD chemistry for conformal LiF not only offers a promising avenue to implement lithium metal anodes for high-capacity batteries but also paves the way for future studies to investigate failure and evolution mechanisms of solid electrolyte interphase (SEI) using our LiF on anodes such as graphite, silicon, and lithium.

Cover Feature: Lithium Difluorophosphate as an Effective Additive for Improving the Initial Coulombic Efficiency of a Silicon Anode (ChemElectroChem 18/2020)

Lithium Difluorophosphate as an Effective Additive for Improving the Initial Coulombic Efficiency of a Silicon Anode

Cover Feature: All‐Solid‐State Lithium–Organic Batteries Comprising Single‐Ion Polymer Nanoparticle Electrolytes (chemsuschem 9/2020)

Simultaneously Manipulating Carbon Coating Layers and Void Structures in Silicon/Carbon Anode Materials Via Bifunctional Templates for Lithium-Ion Batteries

Phosphorous Pentasulfide As A Novel Additive for High-Performance Lithium-Sulfur Batteries

The Synergistic Effect of Lithium Bis(fluorosulfonyl)imide and Lithium Nitrate for High-Performance Lithium Metal Anode

Lithium Difluorophosphate As a Widely Applicable Additive to Boost Lithium‐Ion Batteries: a Perspective (adv. Funct. Mater. 8/2023)

Cover Feature: Fabrication of Dual‐Modified Carbon Network Enabling Improved Electronic and Ionic Conductivities for Fast and Durable Li 2 TiSiO 5 Anodes (chemelectrochem 12/2019)

Lithium Difluorophosphate as a Widely Applicable Additive to Boost Lithium‐Ion Batteries: a Perspective

The optimal amount of lithium difluorophosphate as an additive for Si‐dominant anodes in an application‐oriented setup

Perfluorinated Amines: Accelerating Lithium Electrodeposition by Tailoring Interfacial Structure and Modulated Solvation for High-Performance Batteries

Pentafluoropyridine additive induced SEI film regulation and remarkable performance improvement of the lithium primary batteries

Improving the electrochemical properties of a SiO@C/graphite composite anode for high-energy lithium-ion batteries by adding lithium fluoride

Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate As an Effective Electrolyte Additive

Cover Feature: Enhanced Stability of Lithium Metal Anode by using a 3D Porous Nickel Substrate (ChemElectroChem 5/2018)

Cover Feature: Unlocking High Capacity and Reversible Alkaline Iron Redox Using Silicate‐Sodium Hydroxide Hybrid Electrolytes (ChemSusChem 19/2024)

Improving the cyclability performance of lithium-ion batteries by introducing lithium difluorophosphate (LiPO2F2) additive

Lithium Iron Phosphate Enhances the Performance of High-Areal-Capacity Sulfur Composite Cathodes.

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Cover Feature: Molybdenum Sulfide Nanoflowers as Electrodes for Efficient and Scalable Lithium‐Ion Capacitors (Chem. Eur. J. 40/2024)

Cover Feature: Slurry‐Coated Sulfur/Sulfide Cathode with Li Metal Anode for All‐Solid‐State Lithium‐Sulfur Pouch Cells (batteries & Supercaps 7/2020)