Abstract:Silicon has emerged as a highly promising anode material for lithium-ion batteries (LIBs) owing to its high specific capacity and low voltage. However, previous research on silicon-based anodes has not adequately addressed inherent issues, leading to limited commercial applications on a large scale. Therefore, further scientific investigation is necessary to uncover the lithiation/delithiation process in silicon materials and understand the influence of electrode potential and charge state on the kinetic process during charge and discharge. This understanding will be instrumental in gradually enhancing the performance of silicon materials. Herein, amorphous silicon films were prepared for LIB anodes using the magnetron sputtering method. Molecular dynamics simulations were conducted to investigate the microstructure and volumetric changes of the sputtered amorphous silicon anode during the lithiation and delithiation processes. Additionally, electrochemical characterization techniques such as a galvanostatic intermittent titration technique, electrochemical impedance spectroscopy, and galvanostatic charge–discharge test were employed to explore the electrochemical properties of silicon electrodes. Electrochemical analysis techniques, such as the differential capacity method and distribution of relaxation times, were also used to investigate the deterioration mechanisms of the electrochemical and conversion properties of amorphous silicon anodes. Results revealed that the lithium-ion content in Li x Si, determined through the set cutoff voltage during charge/discharge cycling, considerably affected the volume change of the silicon anode and the composition and integrity of the solid electrolyte interface after cycling. The optimum discharge cutoff voltage was found to be 0.08 V for the amorphous silicon electrode, leading to an optimum cycle life with a capacity retention of 87.17% after 100 cycles.

Over‐Lithiation Regulation of Silicon‐Based Anodes for High‐Energy Lithium‐Ion batteries

Revealing the Overlithiation Effect on Cycling and Calendar Aging of the Silicon/Graphite Electrode for High-Energy Lithium-Ion Batteries

Revealing the Overlithiation Effect on Cycling and Calendar Aging of a Silicon/graphite Electrode for High-Energy Lithium-Ion Batteries.

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Lithiation Depth Regulation of Silicon Anodes toward Excellent Stability

Recent Progress in Silicon-Based Materials for Performance-Enhanced Lithium-Ion Batteries

Lifetime Optimization of Amorphous Silicon Thin-Film Anodes for Lithium-Ion Batteries

Application and Development of Silicon Anode Binders for Lithium-Ion Batteries

New Perspectives on Spatial Dynamics of Lithiation and Lithium Plating in Graphite/Silicon Composite Anodes

Structural control and optimization schemes of silicon‐based anode materials

Regulating Anode‐electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium‐ion Batteries with High‐nickel Layered Oxide Cathodes and Silicon‐Graphite Anodes

Si-Based Anodes: Advances and Challenges in Li-Ion Batteries for Enhanced Stability

Electrolytes for Advanced Lithium Ion Batteries Using Silicon-Based Anodes

Strategies for improving the storage performance of silicon-based anodes in lithium-ion batteries

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

(Digital Presentation) Approaches of Pre-Lithiation on Si Anode for Lithium-Ion Batteries

Synergy effect of regulated Li-plating and functional solid electrolyte interphase on graphite anodes

In Situ Construction of Lithium Silicide Host with Unhindered Lithium Spread for Dendrite‐Free Lithium Metal Anode

Nanostructuring and Alloying of Si-Based Anode Materials

Si‐Based High‐Entropy Anode for Lithium‐Ion Batteries

From Intercalation to Alloying Chemistry: Structural Design of Silicon Anodes for the Next Generation of Lithium-ion Batteries