Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

A Highly Effective Polysulfide-Trapping Approach for the Development of High Energy Density, Scalable Lithium-Sulfur Batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Revamping Lithium–Sulfur Batteries for High Cell‐Level Energy Density by Synergistic Utilization of Polysulfide Additives and Artificial Solid‐Electrolyte Interphase Layers

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Coupling highly dispersed Sb2S3 nanodots with nitrogen/sulfur dual-doped porous carbon nanosheets for efficient immobilization and catalysis of polysulfides conversion

High-performance lithium-sulfur batteries achieved by a multifunctional SiO2-nanotubes/carbon composite interlayer

Efficient Polysulfides Anchoring for Li-S Batteries: Combined Physical Adsorption and Chemical Conversion in V2O5 Hollow Spheres Wrapped in Nitrogen-Doped Graphene Network

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Enhancing conversion of polysulfides via porous carbon nanofiber interlayer with dual-active sites for lithium-sulfur batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Boosting Polysulfide Conversion in Lithium–Sulfur Batteries via Palladium-Based Environmentally Friendly Porous Catalyst

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

A Lithium/Polysulfide Battery with Dual-Working Mode Enabled by Liquid Fuel and Acrylate-Based Gel Polymer Electrolyte.

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries

Hollow nickel-cobalt bimetal phosphides as a confined polysulfide reactor for high-performance lithium-sulfur batteries

Porphyrin‐Derived Graphene‐Based Nanosheets Enabling Strong Polysulfide Chemisorption and Rapid Kinetics in Lithium–Sulfur Batteries

Promoting the Synergistic Effect of Sulfur Immobilization and Polysulfides Trapping by Nitrogen Functionalized Interconnected Hollow Carbon Nanocages for High-Performance Lithium–sulfur Batteries

Multifunctional transitional metal-based phosphide nanoparticles towards improved polysulfide confinement and redox kinetics for highly stable lithium-sulfur batteries

Electrolytes with Controlled Polysulfide Insolvability for Lithium-Sulfur Batteries

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon