Abstract:Lithium (Li) metal is a promising candidate for next-generation anode materials with high energy densities. However, Li dissolution/deposition processes are limited at the upper surface in contact with the electrolyte, which brings a locally high current density and then results in dendritic Li growth. This restraint of the local surface reaction during cycling has not been solved by commonly used modification strategies. In this study, a three-dimensional (3D) Li+ conductive skeleton is activated from atomic layer deposition (ALD) coating Li3PO4 (LPO) on the surface of the Ni foam (LPNF). Then, the skeleton is efficiently constructed in the Li metal anode by the lower-temperature Li infusion. Ionic conductor LPO layers and electronic conductor Ni fibers supply charge transport channels between the electrolyte and the internal Li. The mixed conductive network realizes holistic charge transfer, which is proved by in situ scanning electron microscopy experiments. In virtue of dispersive dissolution/deposition and optimized electrochemical kinetics brought by a Li+ conductive network, the composited Li electrode presents an excellent symmetric battery cycling stability (over 1200 h) and enhanced rate performances (stable cycling even at 10.0 mA cm-2). When matching with a LiCoO2 (LCO) cathode, LCO||Li@LPNF full batteries exhibit a capacity retention of 80.8% over 250 cycles. During cycling, there was no evidence of dendrite growth and the remaining Li in the composited anode showed a smooth, compact, and well-combined condition with LPNF. Through constructing a 3D Li+ conductive network, the composited Li metal anode breaks through the limit of the local surface reaction; this work proposes a novel insight of realizing holistic charging/discharging for the dendrite-free Li metal anode.

3D printing dendrite-free lithium anodes based on the nucleated MXene arrays

In Situ Synthesis of a Lithiophilic Ag-Nanoparticles-Decorated 3D Porous Carbon Framework Toward Dendrite-Free Lithium Metal Anodes

3D Printing Lithium Salt towards Dendrite-free Lithium Anodes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

Dendrite-Free and Ultra-Long-Life Lithium Metal Anode Enabled Via a Three-Dimensional Ordered Porous Nanostructure.

3D-Printed Porous GO Framework Enabling Dendrite-Free Lithium-Metal Anodes

High-Coulombic-Efficiency Lithium Metal Anodes Enabled by Three-Dimensional Lithiophilic Nanostructures with Multiscale Porosity

Dendrite-free lithium metal anode enabled by ion/electron-conductive N-doped 3D carbon fiber interlayer

Homogenizing the Li-ion flux by multi-element alloying modified for 3D dendrite-free lithium anode

Concurrent realization of dendrite-free anode and high-loading cathode via 3D printed N-Ti3C2 MXene framework toward advanced Li–S full batteries

3D lithiophilic arrays growing in situ on copper foils for stabilizing lithium metal anodes

Scalable slurry-coating induced integrated 3D lithiophilic architecture for stable lithium metal anodes

General construction of lithiophilic 3D skeleton for dendrite-free lithium metal anode via a versatile MOF-derived route

Three-dimensional Carbon Material As Stable Host for Dendrite-Free Lithium Metal Anodes

3D printing of an anode scaffold for lithium batteries guided by mixture design-based sequential learning

Flexible, freestanding and lithiophilic Indium/MXene heterostructure enabling dendrite-free lithium metal anode in commercial carbonate-based electrolyte with high voltage cobalt-free LiNi0.5Mn1.5O4 cathode

Electrochemical Dealloying-Enabled 3D Hierarchical Porous Cu Current Collector of Lithium Metal Anodes for Dendrite Growth Inhibition

3D artificial electron and ion conductive pathway enabled by MgH2 nanoparticles supported on g-C3N4 towards dendrite-free Li metal anode

Graphitic Carbon Nitride Induced Micro‐Electric Field for Dendrite‐Free Lithium Metal Anodes

Constructing ultrafine lithiophilic layer on MXene paper by sputtering for stable and flexible 3D lithium metal anode

3D‐Printed Multi‐Channel Metal Lattices Enabling Localized Electric‐Field Redistribution for Dendrite‐Free Aqueous Zn Ion Batteries