Abstract:Despite dominating the current commercial energy storage landscape, Li-ion batteries are fast approaching their theoretical limit. Meanwhile, Lithium Sulphur (Li-S) batteries, owing to their ultrahigh theoretical energy density of about 2600 Whkg -1 , low-cost, Earth-abundant, and environmentally friendly sulfur (S) cathode, are seen as promising replacements to realize energy densities beyond 500 Whkg -1 . Despite these advantages, the large-scale implementation of Li-S technology has been stymied due to several issues, one of the most deleterious of them is the dissolution and shuttling of polysulfide intermediates during cycling resulting in severe self-discharge, lowered S utilization and coulombic efficiency. Over the past decades, substantial amount of research towards mitigating 'polysulfide shuttling' shuttling has been focused on cathodic modification strategies such as infiltration of S in porous carbon, metal oxide or conducting polymer scaffold matrix which retard the mobility and loss of active material. However, such simple confinement strategies have been shown to be lacking over long cycling due to the relatively weak intermolecular interactions between the host and polysulfide molecules. An effective solution comes in the form of engineering 'sulfiphilic' materials that adsorb polysulfide species. For example, surface modification of cathodes with rGO and functionalized carbon species have shown success in reducing the redox shuttling. However, these approaches require elaborate preparation and hence, are limited in their practical usage. To overcome this, we propose a facile approach to improve cell performance via incorporation of functionalized graphenic species in the Li-S electrolyte. In this work, we have probed the impact of using tailored single-layer, heteroatom-doped graphene as electrolyte additives. We have studied the impact of their morphology and functionalization on the electrochemical performance of the cell. Results show a marked improvement in the discharge capacity and a high capacity retention of 84% over 105 cycles at 0.2 C cycling rate. The GCD cycle analysis showed an improvement in first cycle discharge plateau suggesting improved S utilization which was further substantiated by extensive postmortem analysis and polysulfide adsorption testing. Further, the electrolyte-modified cells showed an impressive three-fold and two-fold improvement in capacity at 1C and 2C cycling rates, respectively. These results demonstrated that tailored heteroatom-doped graphene in the form of electrolyte additive is an effective strategy to improve electrochemical performance via enhanced polysulfide encapsulation, cell conductivity and anode stabilization. Finally, we will present the effect of heteroatom-doped graphenic species on mitigation of polysulfide shuttling and cell performance when they are incorporated in the gel electrolyte system.

Computational Design of Hydrogenated Monolayer Pyrite for Enhanced Energy Storage

Lithium-Decorated Oxidized Porous Graphene for Hydrogen Storage by First Principles Study

Hierarchical MOF-derived Layered Fe3O4 QDs@C Imbedded on Graphene Sheets As a High-Performance Anode for Lithium-ion Storage

Homogeneous Distributed Natural Pyrite-Derived Composite Induced by Modi-Fied Graphite As High-Performance Lithium-Ion Batteries Anode

Theoretically unraveling the performance of 2D-FeS 2 as cathode material for Li-S batteries

Advances and Prospects of 2D Graphene‐Based Materials/Hybrids for Lithium Metal–Sulfur Full Battery: From Intrinsic Property to Catalysis Modification

3D Mesoporous Graphene: CVD Self-Assembly on Porous Oxide Templates and Applications in High-Stable Li-S Batteries.

Preparation of a Sulfur-Doped Graphene-Wrapped FeS 2 Microsphere Composite Material for Lithium-Ion Batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Incorporating Heteroatom-Doped Graphene in Electrolyte for High-Performance Lithium-Sulfur Batteries

Hydrogenated Amorphous Silicon-Based Nanomaterials as Alternative Electrodes to Graphite for Lithium-Ion Batteries

Theoretical Calculation Guided Design of Single-Atom Catalysts Toward Fast Kinetic and Long-Life Li-S Batteries

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

Holey Graphene Modified LiFePO4 Hollow Microsphere As an Efficient Binary Sulfur Host for High-Performance Lithium-Sulfur Batteries

Theoretical Design and Study of a Single-Atom Catalyst in Lithium-Sulfur Batteries: Edge-Type FeN4 Active Site Electron Density Redistribution Driven by Heteroatoms

High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes

Designing a Hybrid Electrode Toward High Energy Density with a Staged Li+ and PF6− Deintercalation/intercalation Mechanism

Dual-Phase Lithium Metal Anode Containing a Polysulfide-Induced Solid Electrolyte Interphase and Nanostructured Graphene Framework for Lithium-Sulfur Batteries.

Encapsulating yolk-shell FeS<sub>2</sub>@carbon microboxes into interconnected graphene framework for ultrafast lithium/sodium storage

Dense Graphene Monolith for High Volumetric Energy Density Li–S Batteries

Microstructured Sulfur-Doped Carbon-Coated Fe 7 S 8 Composite for High-Performance Lithium and Sodium Storage