Abstract:The efficiency of processes involving frictional contacts between surfaces is often characterized by wear rates or friction coefficients. However, the classification and forecasting of wear rates in friction related processes is a real industrial challenge that is unsolved today. Hence, an on-line monitoring system able to classify wear rate can be crucial for many industries as it could help in preventing catastrophic failures. Applications include lifetime assessment of various industrial components where a range of wear failures occur such as scuffing (a typical sudden failure mechanism). These tribological processes can now be sensorized, and the corresponding sensor signatures can be modelled and monitored using state-of-the-art Machine learning (ML) algorithms. In this study, we use an Acoustic Emission (AE) sensor and ML frameworks to classify different wear categories simulated with a customized pin-on-disc tribometer. A real-time investigation of the wear track is necessary to find out the origins of the wear scar visible at the surface. To achieve this objective, the experiments were conducted on a pin-on-disc tribometer equipped with a Digital Holographic Microscope (DHM). Experiments were carried out using alumina and steel balls against steel discs at room temperature. Real-time DHM images of the wear track surface were recorded for each lap at the same position. An acoustic emission sensor recorded the AE signals during the complete duration of experiments. The AE signatures, in combination with the real-time DHM images, were correlated as input and ground truth labels for the ML algorithm. Several ML frameworks were compared; they are support vector machine, logistic regression, XGBoost, random forest, neural networks, k-Nearest Neighbor, quadratic discriminant analysis and Naive Bayes. The classifier was trained to differentiate the acoustic emission features of the different wear rates. Most ML algorithms had an average classification accuracy above 80%, and the highest was obtained with support vector machine (84.7%). The classification accuracy can be improved by combining two neighboring categories with limited differences in terms of wear rate. Hence, the proposed method has a significant industrial potential for in-situ and real-time quality monitoring of wear processes since it requires minimum modifications of commercially available industrial machines.

On the Use of Alternative Measurement Methods in the Estimation of Wear Rates in Rotary-Pin-on-Disk Tribometry

Ball-on-flat linear reciprocating tests: Critical assessment of wear volume determination methods and suggested improvements for ASTM D7755 standard

Uncertainty-based comparison of conventional and surface topography-based methods for wear volume evaluation in pin-on-disc tribological test

Numerical study of sliding wear caused by a loaded pin on a rotating disc

Prediction of wear volume and friction coefficients of SS304 alloy using grey taguchi based response surface methodology

Large scale multi-parameter analysis of wear of self-mated 100Cr6 steel – A study of the validity of Archard's law

Effects of Different Load with Vary Lubricant on the Friction Coefficient and Wear Rate Using Pin on Disk Tribometer

An approach to understanding tribological behaviour of dental composites through volumetric wear loss and wear mechanism determination; beyond material ranking

Archard’s wear law revisited to measure accurate wear coefficient considering actual sliding velocity

Friction measurement by using a scratch test method

Wear rate optimization of tungsten carbide (WC) nano particles reinforced aluminum LM4 alloy composites using Taguchi techniques

A comparison of three different methods for the quantification of the in vitro wear of dental materials

Quantification of in vitro produced wear sites on composite resins using contact profilometry and CCD microscopy: a methodological investigation

Acoustic emission and machine learning based classification of wear generated using a pin-on-disc tribometer equipped with a digital holographic microscope

A method to evaluate profilometric tooth wear measurements

Optimisation of dry sliding wear characterisation of as-cast and T6 treated hypereutectic aluminium alloy (AlSiCuCe) by Taguchi technique

Experimental investigation on wear behavior of titanium alloy (Grade 23) by pin on disc tribometer

Effectiveness of Shannon Entropy Weight Method on Wear Behaviour of Polyester/Carbon Fibre Composites Using GRA

Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites

Hybrid Tribotest Method for Realistically Measuring Friction and Wear of Heavy-Load Bearing Shells

Numerical Differential Measurement on Microtribological Testing