Experimental study on cylinder wake control using forced rotation

Muharrem Hilmi Aksoy,Sercan Yagmur,Sercan Dogan,Ilker Goktepeli,Murat Ispir
DOI: https://doi.org/10.1016/j.jweia.2024.105662
IF: 4.437
2024-02-07
Journal of Wind Engineering and Industrial Aerodynamics
Abstract:The study focused on the flow over a rotating circular cylinder in the context of flow control. Particle Image Velocimetry was employed to examine flow characteristics at 2.5 × 10 3 ≤ Re ≤ 10 × 10 3 . The rotation rates ( α ) were considered up to 1.57. The mean drag coefficients ( CD ̅ ) and Strouhal numbers ( St ) were examined. The vortex formation length was obtained as approximately 2.1 times the cylinder diameter for α = 1.57. For the stationary cylinder, the length was 1.2 times the diameter from Re = 2.5 × 10 3 to Re = 10 × 10 3 . Forced rotation enhanced the momentum for the boundary layer and postponed the flow separation on the upper side of the body, leading to flow attachment at α = 1.57. The values decreased from CD ̅ = 1.029 to CD ̅ = 0.907 as α increased from 0 to 0.39 due to the shrinkage of the wake at Re = 10 × 10 3 . Drag reduction was 3.5 % for α = 0.13, 5.7 % for α = 0.26, and 11.8 % for α = 0.39 thanks to active flow control. The St was attained as 0.17 ≤ St ≤ 0.21 for Re varied, while it remained relatively stable for different α values at the same Re.
mechanics,engineering, civil
What problem does this paper attempt to address?