Abstract:The depletion of the primary metal sources has prompted the exploration of alternative avenues for metal recovery. In the case of titanium and iron, the ferrovanadium residue produced through roast-leach processing of titanomagnetite presents a viable option for accessing these metals. Titanomagnetite resources, which contain valuable elements, such as iron, vanadium, and titanium, possess significant valuable potential. Titanomagnetite deposits are normally treated via smelting for vanadium or vanadium and iron recovery; titanium is not commercially recoverable. Titanomagnetites have recently been processed through the roast-leach method for vanadium primary production, and iron and titanium are typically part of the waste stream in this process. This study proposes a novel approach to determine the characteristic mineralogy and to study the phase transformation sequence of the roasted-leached ferrovanadium residue during the pre-oxidation process. Leaching was also done to evaluate the extraction potential of Fe, V and Ti on the pre-oxidized residue in comparison to the raw residue The roasted-leached ferrovanadium residue was sampled using the cone and quartering method and then, dried in an oven at temperatures of between 30 and 40 °C, for an hour after which, the remaining moisture content was determined. The bond milling method was employed to reduce the sample size, while the particle size distribution (PSD) was verified by using the standard laboratory Tyler series. Thereafter, the roasted-leached ferrovanadium residue was characterized with XRD, SEM, ICP-OES, and XRF. The samples were pre-oxidized at temperatures ranging from 300 °C to 1000 °C with an aim of improving the grades of iron, vanadium, and titanium-bearing minerals prior leaching. The results revealed the moisture content to be ∼5.07%. The bond work index of typical slags was estimated to be 10.2 kwh/t, with a determined d80 value of 200 μm. According to the XRF analysis, the predominant compounds present are hematite, Fe2O3 (75.55%), titanium dioxide, TiO₂ (12.79%), silicon dioxide, SiO2 (3.03%), and alumina, Aℓ2O3 (2.62%), along with minor compounds. XRD patterns exhibited the presence of FeTiO3 and VO2 in the as-received samples, while pre-oxidation induced the evolution of new phases such as hematite, rutile, anatase, and pseudobrookite.

Valorization of Iron (II) Oxalate Dihydrate Coming from Pickling Processes through Thermal Conversion

The Recycling of Ferric Salt in Steel Pickling Liquors: Preparation of Nano-sized Iron Oxide

Reclamation Of Acid Pickling Waste: Preparation Of Nano Alpha-Fe2o3 And Its Catalytic Performance

Unlocking the hidden value of industrial by-products: Optimisation of bioleaching to extract metals from basic oxygen steelmaking dust and goethite

Efficient Recycling and Utilization Strategy for Steel Spent Pickling Solution

An innovative route for valorising iron and aluminium oxide rich industrial wastes: Recovery of multiple metals

Phase transformation sequence of pre-oxidized roast-leach ferrovanadium residue

Utilization of Hematite Particles for Economical Removal of o-xylene in a High-Temperature Gas-Solid Reactor

Iron Recovery from Iron Ore Tailings by Direct Hydrogen Reduction at Low Temperature and Magnetic Separation

A New Life for Tionite Industrial Waste: Regeneration Strategy towards Photocatalytic Applications

Acid recovering and iron recycling from pickling waste acid by extraction and spray pyrolysis techniques

Reuse of Waste Pickling Acid for the Production of Hydrochloric Acid Solution, Iron(II) Chloride and Magnetic Iron Oxide: An Eco-Friendly Process

Devising a comprehensive technology for treating industrial iron sulfate-containing effluents of galvanic production

Cleaner and effective extraction and separation of iron from vanadium slag by carbothermic reduction-chlorination-molten salt electrolysis

Engineering Iron Oxide Nanocatalysts by a Microwave-Assisted Polyol Method for the Magnetically Induced Degradation of Organic Pollutants

Evaluation of a green-sustainable industrialized cleaner production for FeV50 and FeV80 alloys from vanadium slag by calcification roasting–ammonia on-line cycle

Resource-recycling and energy-saving innovation for iron removal in hydrometallurgy: Crystal transformation of ferric hydroxide precipitates by hydrothermal treatment

Tuning the intrinsic catalytic sites of magnetite to concurrently enhance the reduction of H2O2 and O2: Mechanism analysis and application potential evaluation

An effective and cleaner process to recovery iron, titanium, vanadium, and chromium from Hongge vanadium titanomagnetite with hydrogen-rich gases

Thermodynamics of Aluminothermic Processes for Ferrotitanium Alloy Production from Bauxite Residue and Ilmenite

Recycling of hazardous jarosite residues based on hydrothermal crystal transformation