Abstract:The authors proposed a new precast RC column-steel beam (RCS) joint with whole column-section diaphragm, aiming to address the shortcomings including bearing failure and difficulty in prefabrication of the RCS joint details available in the existing literature. Due to its unique details, the proposed RCS joint may have a dissimilar force-transferring mechanism from the conventional beam-through type RCS joint. Moreover, the effect of various parameters on this novel joint was still unclear by limited test results. The objective of this study was to clarify the shear mechanism of the proposed joint and the impact of critical parameters. Specimens with different axial load ratios and thickness of parallel FBPs were tested under cyclic loading. The results showed that the increase in axial load ratio and thickness of parallel FBPs improved joint strength in this test. A detailed threedimensional finite element (FE) model was developed and verified using the experimental results. The difference in the force transferring between the proposed joint and conventional beam-through RCS joints was explained in detail based on the numerical results. The dowel action of longitudinal column bars were evident in the proposed joint and the orthogonal FBPs were ineffective in activating the inner concrete strut. A parametric study was further conducted. The impacts of width of parallel FBPs, thickness of orthogonal FBPs, and axial load ratio were investigated. The joint strength linearly increased with the width of parallel FBPs. A parabolic distribution of shear stress in the parallel FBP section was obtained, while the yield zone was concentrated in the central area of the parallel FBP. The ductility could be improved with the thickness of orthogonal FBPs when the thickness was less than 10 mm. Further increasing the thickness of orthogonal FBP beyond 10 mm did not significantly affect the overall joint behavior. The joint may attain the optimal shear strength when the axial load ratio is between 0.3 and 0.4. The modeling approach in this study could be adopted as an effective tool to assess joint behavior. Moreover, the conclusions obtained by numerical study potentially promoted the application of the proposed joint.

Seismic behavior of wall-type spiral stirrups-confined RC column to steel beam joint

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Shear Mechanism of RCS Joints with Whole Column-Section Diaphragm

Effects of Concrete Strength and Joint Stirrup Ratio on Seismic Behavior of Precast RCS Joint with Simple Detail

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Seismic Performance of Wall-Type Concrete-Filled Steel Tubular Column to H-Beam Connections with Internal Diaphragms

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Seismic Performance of Full-Scale Joints Composed by Concrete-Filled Steel Tube Column and Reinforced Concrete Beam with Steel Plate-Stud Connections

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

Seismic behaviour of a wall-type concrete-filled steel tubular column with an end plate steel beam reinforced joint

Research on Shear Capacity of Concrete-Filled Square Steel Tubular Column to Unequal Height Steel Beam Joint with External Diaphragm

Experimental study on the seismic behavior of an innovative stepped beam-column joint

Seismic performance of joint between steel H‐beam and rectangular concrete‐filled hot‐rolled‐steel tubular column

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joint: Experiment

Seismic Performance of Irregular-Shaped Concrete-Filled Steel Tube Column to H-shaped Steel Beam Joints with Inner Semi-Diaphragm: Experimental and Numerical Study

Experimental study on seismic performance of a new transfer joint in the steel-concrete vertical hybrid structure

Investigation on Shear Capacity of Joints between Steel Reinforced Concrete Special-Shaped Column and Reinforced Concrete Beam