Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joint: Experiment

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joints: Analytical Study

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Seismic Performance of Concrete-Encased CFST Column to Steel Beam Joints with Different Connection Details

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Seismic Performance of 3-D Steel Beam to Concrete-Encased CFST Column Joints: Tests

Fire Performance of Steel-Reinforced Concrete Beam–column Joints

Seismic Performance of Full-Scale Joints Composed by Concrete-Filled Steel Tube Column and Reinforced Concrete Beam with Steel Plate-Stud Connections

Behaviour of Composite Joints with Concrete Encased Cfst Columns under Cyclic Loading: Experiments

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

EXPERIMENTAL INVESTIGATION ON CYCLIC PERFORMANCE OF CFST COLUMN-RC BEAM JOINTS ENCLOSED BY REBARS

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Cyclic Testing of Concrete-Filled Double-Skin Steel Tubular Column to Steel Beam Joint with RC Slab

Seismic Performance of CFST Column to Steel Beam Joints with RC Slab: Analysis

Fire Performance of Concrete Filled Steel Tubular (CFST) Column to RC Beam Joints

Experimental Behaviour Of Reinforced Concrete Beam To Concrete Filled Steel Tubular Column Joints Under Fire

Inclined Concrete-Filled SHS Steel Column to Steel Beam Joints under Monotonic and Cyclic Loading: Experiments

Fire Performance of Concrete-Encased CFST Columns and Beam-Column Joints